Craftsman Parts

Drive belt for walk-behind mowers. Replace when you notice slipping, reduced power transfer, or visible wear. Verify fit with your model number.

This is a V-belt that connects the engine to the ground drive system on a snowblower. It transfers power to the wheels, allowing the machine to propel itself forward. Replace this belt if the snowblower no longer moves under its own power, the belt appears cracked, glazed, stretched, or has broken.

This timing belt is a genuine MTD part, sold individually. This timing belt can be used as a replacement part for a lawnmower. The timing belt maintains the positioning of the blades so that they are rotated in time without interfering with one another.The timing belt might have to be replaced if it is damaged or is not working properly within the infrastructure of the appliance. If the blades are knocking into each other while the lawnmower is in operation or if the belt shows signs of damage in the form of punctures, piercings, tearing, or erosion, the timing belt should be removed and replaced with this genuine OEM replacement part before using the lawnmower again. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This timing belt is compatible with the following outdoor appliance brands: MTD, Craftsman, Troy-Bilt, and Cub Cadet.

This is a replacement belt that can be used on select edger/trimmer models of lawn and garden equipment. This is the main drive belt that is responsible for driving the trimmer blades. Belts are made of rubber and exposed to constant and repetitive motion, which can cause them to stretch or wear out over time. Eventually, they may become so loose or damaged that they will not be able to drive the blades and will need to be replaced. Without a properly functioning drive belt, the trimmer blades will not work. A genuine replacement part like this provides an exact fit for compatible units. This OEM drive belt is manufactured by MTD and can be used with select models of trimmers from the brand and a few models from Troy-Bilt, as well. This belt is sold as an individual unit and does not include any additional components or hardware. In order to replace the drive belt, a set of wrenches is required. It is advised to clean the pulleys before installing the new belt to ensure optimal performance and extend the life of the belt. Be sure to disengage the engine and wear gloves when replacing this belt or other internal parts.

The drive V-belt, manufactured by Craftsman, is used in one- and two-stage snow blowers as well as tillers. This is a drive belt that connects the engine to the auger of the tiller or snowblower via a pulley at either end. This turns the blades of the tiller or the auger blades of the blower to expel snow. As a flexible, hardened rubber part connecting other moving parts, a V-belt is considered “replaceable,” meaning that users should expect to have to replace this part during normal use of the equipment. Signs that a drive V-belt may be going bad are a squealing sound when the blower's auger or the tiller's blades are first engaged, or if the auger is slow to engage and loses power during use. To replace the V-belt, the equipment must be secured and the spark plug caps removed. Tilt the device to reveal the location of the belt. It must detached from the engine pulley and the transmission pulley. When replacing the V-belt, before tightening the pulley, make sure all moving parts are properly aligned. This genuine OEM part is compatible with machines sold by MTD, Yard Man, Craftsman, and Yard Machine.

V-belt transfers power from engine to auger or drive system. Replace if worn, cracked, or slipping. Verify fit using your model number before ordering.

Drive belt transfers power from engine to wheels on self-propelled mowers and snow blowers. Replace if slipping, worn, or cracked. Verify fit by model number.

Transmission drive belt for riding mowers and tractors. Replace if slipping, worn, or cracked to restore power transfer. Verify fit with your model number.

Deck spindle belt for lawn tractors and walk-behind mowers. Replace when worn, cracked, or slipping to restore proper blade operation. Verify fit.

Replacement transmission belt for walk-behind mowers. Links rotating shafts for smooth operation. Replace if mower loses drive power or belt shows wear.

This V-belt is designed for use in snowblowers by several major manufacturers. It is used to rotate the blades in the blower and acts as the primary belt for the device. These belts are made of a rubber material, which means they can sometimes stretch out, break, or wear down. If this occurs, the V-belt needs to be replaced to ensure the snowblower continues to work at its best.The more frequently a snowblower is used, the more likely it is that a replacement V-belt will be needed. In some cases, a V-belt can wear out more quickly than expected due to faults like mechanical failures. When the belt is overly worn, it can cause the snowblower to act sluggishly since the belt can slip off of the pulley. If the belt breaks, the snowblower will no longer be able to operate. When replacing the belt, drain the fuel and remove the spark plug for a safe repair.This V-belt is a genuine OEM replacement part that is sourced directly from the manufacturer. It's made for use with snowblowers by Craftsman, Yard-Man, Cub Cadet, Huskee, Troy-Bilt, MTD, and Yard Machines. It is sold as an individual component.

Drive belt for gas snowblowers and snow throwers. Replace if you notice slipping, cracking, or loss of power during operation. Verify fit with your model.

Transmission drive belt for front-engine lawn tractors. Replace if you notice slipping, squealing, or poor power transfer. Verify fit with your model number.

Transmission drive belt for lawn tractors. Replace if you notice slipping, squealing, or loss of power during operation. Verify fit with your model.

V-belt drives tiller tines for proper rotation. Replace if stretched, cracked, or worn from regular use. Verify fit with your tiller model number.