Craftsman Parts

This belt is used for snowblowers. When the machine is running, the belt turns and propels the auger, which then blows the snow through the chute. If the belt is broken or otherwise not functioning properly, the snowblower will not work.The belt may need to be replaced for any number of reasons. It could become damaged while in use, although this is rare. Over time, the belt could start to stretch and weaken. It may not longer provide the same level of efficiency as when it was new. There is also the chance that the belt could snap. When replacing the belt, it is recommended that the owner also clean the pulleys. This can prevent premature wear and tear.This snowblower belt is for use with many models from MTD, Yard Machines, Cub Cadet, and Troy-Bilt. The belt is a genuine OEM replacement part sourced from the manufacturer. It is sold individually.

This V-belt is a genuine MTD part. It is manufactured as a replacement part for snow blowers and snow throwers. It is sometimes called an auger belt. On snowblowers, the v-belt helps rotate the impeller or auger. Over time, especially with frequent use, the v-belt can become worn and will need to be replaced. Before starting this repair, be sure the engine has completely cooled. Depending on the make and model of the blower, parts of the body or the engine may also need to be disassembled.This v-belt is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, Columbia, Cub Cadet, MasterCraft, MTD, Troy-Bilt, White Outdoor, and Yard-Man.

This part is a replacement V-belt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a broken or defective V-belt in outdoor power equipment.V-belts, sometimes referred to as drive belts, are part of the equipment's drive system and help to transfer torque in order to power the engine. They can become easily worn, snapped, or otherwise broken, which can prevent the equipment from working. In this case, the belt must be replaced. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this V-belt, the appropriate owner's manual and equipment diagrams should be referred to. This V-belt is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with lawn tractor models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This is a v-belt that is designed to be used with lawnmowers. The v-belt is one of a set of belts that are created to drive the lawnmower. This belt connects the transaxle pulley to the engine crankshaft and drives the wheels on the tool. This belt is made of durable rubber but can experience wear and tear or damage. If the belt breaks, the lawnmower will not work. Worn belts can also cause the mower to run less smoothly since the belt may slip on the pulley.Basic tools and a pair of work gloves may be needed to replace the v-belt. Before making the replacement, turn off the lawnmower and place it on a flat surface. The spark plug wire should also be disconnected for safety. Take out the old belt and clean the pulleys to ready them for the new component. Install and use as normal.This v-belt is made to be compatible with lawnmowers manufactured by MTD and Craftsman. This part is sold individually. It is a genuine OEM replacement component that is directly sourced from the manufacturer.

This v-belt is a genuine MTD part, sold individually. This v-belt can be used as a replacement part in a lawnmower. The purpose of the v-belt in a lawnmower is to facilitate the powering on of the deck assembly through rotation, so that the lawnmower can be comfortably driven by the operator across a variety of surfaces.The v-belt in a lawnmower might have to be replaced if the v-belt is torn, ripped, scraped, dented, punctured, eroded, or otherwise damaged. If the v-belt suffers damage, it should be removed and replaced by this genuine OEM replacement part in accordance with the proper instructions sourced from a relevant appliance manual. It is a simple replacement process that will require only basic tools to execute by the operator of the appliance.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This v-belt is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, and Yard-Man.

This replacement part is a transmission belt intended for use in lawn equipment. This is a genuine replacement part made by MTD. Transmission belts link various rotating shafts to ensure that the entire machine is running smoothly and efficiently. A new transmission belt might be needed if the current one is damaged or broken in any way. The user might be able to tell when the belts are malfunctioning if there are noises coming from the machine that are not typical. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. It is recommended that the user refer to the appliance manual for more detailed instructions on how to install this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by MTD.

This V-belt is designed for use in snowblowers by several major manufacturers. It is used to rotate the blades in the blower and acts as the primary belt for the device. These belts are made of a rubber material, which means they can sometimes stretch out, break, or wear down. If this occurs, the V-belt needs to be replaced to ensure the snowblower continues to work at its best.The more frequently a snowblower is used, the more likely it is that a replacement V-belt will be needed. In some cases, a V-belt can wear out more quickly than expected due to faults like mechanical failures. When the belt is overly worn, it can cause the snowblower to act sluggishly since the belt can slip off of the pulley. If the belt breaks, the snowblower will no longer be able to operate. When replacing the belt, drain the fuel and remove the spark plug for a safe repair.This V-belt is a genuine OEM replacement part that is sourced directly from the manufacturer. It's made for use with snowblowers by Craftsman, Yard-Man, Cub Cadet, Huskee, Troy-Bilt, MTD, and Yard Machines. It is sold as an individual component.

This part is a v-belt that is used on lawnmowers. A v-belt is a part of the driving mechanism in an engine.A new v-belt will be needed if the belt is torn, split, cracked, or broken in any way. The operator may notice a squealing noise or that the power steering isn't working. The engine may be overheating also. The v belt may become worn out due to normal wear and tear over a period of time. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This v belt is a genuine MTD part. It is sold individually. This particular v belt is compatible with lawnmowers that are manufactured by the Troy-Bilt, Cub Cadet, and MTD brands.

The auger drive belt is designed to fit select snowblower models. The drive belt attaches to the auger and the drive motor to rotate the auger and turn the snowblower blade. The belt needs to be in proper working order for the snowblower to be able to pick up and move snow appropriately. In the event that the belt snaps or the blade is not turning as it should, a replacement may be required. This belt can provide a replacement for compatible machines. This is a genuine replacement part from Craftsman that is manufactured to specific standards. It is designed to work with over 150 machines from the brand as well as select machines from Murray. The belt requires a socket set, wrenches, and a clamp to replace. This part also includes a one-year limited warranty from the manufacturer and is tested for premium performance. The belt is made of durable rubber and sold individually. Always wear gloves when performing this replacement and be careful whenever working with tension to avoid pinch injuries.

Experts agree that snowblower belts typically last from five to seven years, depending on how hard the machine is used each season and the overall conditions. This OEM replacement drive belt is designed to perform to the same standards as factory installed belts. Making the repair is relatively straightforward and requires the removal of the upper belt guard. From there, access to the pulleys is possible and an extension bar along with a ratchet and socket are necessary for the repair. The next steps vary based on model. This belt works with Snapper, Simplicity, Murray, Briggs & Stratton, among other snowblower makes and models. It ships individually.