Craftsman Blade

Articulating tine blade assembly for rear-tine tillers. Mounts to tine shaft for soil cultivation. Replace if bent, broken, or excessively worn edges.

This is a scraper blade (also called a shave plate or sheave plate) that mounts along the bottom edge of a snow blower's auger housing. It scrapes snow and ice from the ground surface as the machine moves forward. Replace this blade if it is worn down, bent, or no longer clears the pavement effectively, leaving behind a layer of packed snow.

Secures the mower blade to the motor shaft. Replace if adapter is worn, stripped, cracked, or no longer holds the blade firmly in place during use.

Connects mower blade to spindle for secure attachment. Replace if stripped, cracked, or worn to ensure blade stays properly mounted during operation.

These quality tiller tines are used on a variety of yard tillers. Tiller tines are blades attached to the tiller that turn soil and prep it for cultivating a garden. As the tiller tines are used, they can become worn down, broken, or damaged through use or impact with rocks and other debris. These are C-shaped tines that can cut through dense soil.If the tiller tines are bent, dull, or damaged, they will need to be replaced, otherwise they might till the soil unevenly and may not reach the depth required. To replace the tines, remove the spark plug wire before taking off the tine shield end cover. Taking out the tines requires removing the cotter pin from the clevis pin so the clevis pin can be pulled out. Next, the tines can be pulled directly off of the shaft. Slide on the new tines and reinstall the clevis and cotter pins before using the tiller again.These tiller tines are an authentic OEM replacement part directly sourced from the manufacturer. It is sold as an individual part. The tines are compatible with tillers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, Bolens, Yard Machines, MTD, Huskee, and Montgomery Wards.

The snow thrower shave plate is a metal scraper located at the bottom front of the auger housing that clears snow down to the pavement surface. Replace it when you notice uneven snow clearing, gouging of surfaces, or visible wear and chipping on the plate's edge.

A blade is the part of chippers and shredders that cuts the grass. It spins rapidly and pulls the grass up before cutting it. The grass is sucked into the deck, where the clippings continue to get chopped into smaller pieces before getting expelled. With regular use of the blade, after accidental damage, or because of the age of the machine, the blade may cease to perform adequately. Running the lawn equipment over rocks or other solid obstacles may also cause the blade to break. In any case, the blade has to be removed, and a new blade should be installed. Wear gloves for protection and handle the blade with caution. Make sure the machine is cooled entirely before beginning the repair.This blade is a genuine OEM part sourced directly from the manufacturer. It is made of durable, high-quality metal. The blade is sold as an individual unit. The replacement part is compatible with MTD, Troy-Bilt, Yard Machines, and Huskee brand lawn and garden machines, including chippers and shredders.

Complete 46-inch mulching blade kit for lawn tractors. Includes blades designed to finely chop grass clippings. Replace worn or damaged blades.

Replace your worn, chipped, or broken walk-behind mower cutting blade. Installs under the deck to restore clean, even cuts after impact damage or wear.

Replacement cutting blade for hedge trimmers. Metal teeth contact cutting surface and can break, chip, or wear over time. Installs on trimmer head.

This is a four-in-one blade that is used for push mowers from several manufacturers. It is used for shredding and mulching leaves. This provides users with more options when cutting the grass on their lawns. If the blade is not working properly, it will limit the functionality of the mower.The metal blade on a mower is durable and meant to last. However, accidents such as running over stumps or rocks could cause the blade to bend or break. Older blades could become worn down and chipped. In some cases, the metal may even begin to corrode. Regardless of what causes the damage, owners need to change the blade out when it no longer works correctly. When replacing the part, users should wear work gloves to protect their hands. This blade works for certain models of push mowers from Husqvarna and Jonsered. It is sold individually and is a genuine OEM replacement blade sourced from the manufacturer.

Replacement blade holder for riding mowers and lawn tractors. Securely mounts and holds the cutting blade to the spindle assembly. Replace if cracked or worn.

Replacement mower blade for front-engine lawn tractors. Installs on the cutting deck. Replace when blade is bent, cracked, dull, or damaged for clean cuts.

Replacement cutting blade for riding mowers and lawn tractors. Installs under the deck to cut grass. Replace if blade is bent, cracked, or worn.

Note: This is ONE blade.