Craftsman Cap, Lid & Cover

This part is a replacement blade cap assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken, lost or defective blade cap assembly in lawn tractors.The blade cap assembly enables the user to easily change the tractor's blades. It is housed in the middle of the blades for quick access. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this blade cap assembly, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This blade cap assembly can be used with lawn tractor models that have been manufactured by Husqvarna and Poulan. Sold individually.

This is a genuine MTD fuel cap replacement made for use on select snowblowers. It features a molded gasket for secure sealing and less risk of losing parts. The fuel cap is responsible for securing the fuel in the fuel tank during operation so that it doesn't spill out. There is an air hole in the cap to prevent pressurization of the fuel, ensuring safe operation at all times. This cap is made of plastic and it can become cracked or stripped with regular use. If it is damaged, the fuel will not be secure and the machine will not be safe to use. That will require an immediate replacement. This OEM fuel cap is made to exact standards by MTD and is compatible with several models of snow blowers and snow throwers. It is also capable of fitting select models from Yard Machines, Troy-Bilt, Cub Cadet, Yard-Man, and Husky. It features an easy plastic grip and a seal to prevent spillage. It can be installed with no tools and is sold as an individual unit. It is easy to screw the new cap into place, but be sure to thread the screw properly to prevent accidental stripping or misthreading that can cause the cap to get stuck.

A lawnmower, weed whacker, or trimmer is exposed to a lot of flying debris, and this puts many parts at risk of becoming clogged with grass and other materials. This cover is designed to prevent any debris from reaching the interior of the wheel or the axle. If a large amount of grass or clippings accumulate inside of the assembly, the machine will be almost impossible to move forward - whether self-propelled or manually operated. This cover prevents that from occurring and simply kicks it back in the direction it came. It does take a lot of wear and tear. Installing it is extremely easy and requires little more than a wrench. Even if the cover is aged, or broken, it will remove easily and take minutes to replace. Expect to replace this at least once over the average lifespan of a trimmer. This works with Husqvarna, Poulan, Craftsman, Ariens, Weed Eater, Jonsered, and Murray makes and models. It is a genuine OEM part sold individually.

This is a genuine OEM replacement air filter and housing designed for select outdoor trimmers. The air filter and housing are important to keeping the engine clean. The filter helps to keep debris and dirt from getting into the engine while the filter housing protects it from excess debris or impact damage. Together, they ensure that the engine only gets clean, filtered air for optimal performance. Over time, the filter will become clogged and checking and replacing it should be part of routine maintenance. It is a good idea to inspect the cover assembly when replacing air filters or doing other maintenance to identify potential repairs or issues that need attention. Be sure to wear gloves when performing this repair. Replacing the filter is easy, but there are some instances where the entire unit needs replaced. This genuine OEM part can provide the perfect fit for select trimmers from Craftsman and MTD. It is sold as a complete assembly with the filter and housing. No hardware is included. There are no tools required to install this part.

This replacement part is a door nzle intended for use in different lawn mowers. This is a genuine replacement part made by MTD. Door nzles are used attach to the door of the lawn mower and protect the user from the sharp and dangerous blades that are inside. A new door nzle might be needed if the current one is damaged or broken in any way. It is common for this part to be replaced after years of normal wear and tear. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

This is an air filter cover that can be used on many types of handheld tools for the yard and garden. The air filter is a component that keeps dirt, debris, and other things out of the engine by pulling these contaminants into the filter. The air filter housing sits on top of the filter and helps protect it from damage. The air filter cover can break or become damaged through wear and tear or impact to the cover. This may create breakages or cracks and the air filter cover will need to be replaced. A pair of work gloves and a screwdriver will be needed to make the replacement. Take out the screws on the current air filter cover and remove it before attaching the replacement component.This air filter cover is an authentic OEM component that is sourced directly from the manufacturer. It is sold individually. The cover is designed for use with lawnmowers, leaf blowers, and string trimmers manufactured by Yard-Man, Bolens, MTD, Yard Machines, Troy-Bilt, Ryobi, Cub Cadet, and Craftsman.

MTD air cleaner cover assemblies are located outside of air cleaners found in MTD gas string trimmers. The cover is used to secure the air filter in place. It also is used to protect the internal parts from debris, including the carburetor. The air cleaner cover may need replacing after damage in situations such as the trimmers being dropped. The original cover could also become lost after routine use and therefore ineffective at keeping out dirt, dust, and other particles. These conditions require a replacement to continue the proper protection of the air cleaner and subsequently the engine.Locate the air cleaner cover by determining where the air filter is on the MTD lawn trimming machine. Make sure the tool is cool. Wear gloves for safety. Remove the two screws holding on the existing air cleaner cover if there is one in place. Remove the air cleaner and install the new part.The genuine OEM air cleaner cover assembly replacement part is supplied directly from the manufacturer. It is compatible with several different MTD lawn trimming machines. The air cleaner cover is black and includes two screws. The part is made from high-quality plastic. The air cleaner cover assembly is sold individually.

This air cleaner cover is designed to house the air filter on larger lawn equipment and other outdoor power tools. There is no aspect of small engine care more necessary than protecting the air that goes into the carburetor and cylinder from yard dust. Nothing is more incapacitating to a small engine than being clogged with dust, pollen, and other particulates that are invariably stirred up during landscaping work. While the air cleaner cover itself is not a moving part and would not seem to be subject to replacement, it is occasionally the case that, through extensive use or accidental contact, the cover becomes unable to shield the air filter within it. In these cases, it is essential to replace the cover with an OEM certified replacement cover that has been manufactured to the same specification as the original. Though replacing the cover itself is quite simple, it probably a very good idea to replace the air filters at the same time. If the cover is in need of replacement, it is quite likely the filters have been exposed to excessive amounts of particulate. This cover can be used on chippers, shredders, log splitter, mowers, and a variety of other small engine/large job equipment. Compatible brands include Troy-Bilt, MTD, Yard-Man, Yard Machines, and Cub Cadet.

This item is a replacement oil cap for a chainsaw. It has a bulb shape and features an oil can so that users can easily distinguish from other tanks. The oil cap helps to cover the oil tank, preventing dirt or debris from getting inside. Having dirt in the oil can gum up the works and cause structural engine damage. Oil is meant to lubricate so introducing grit into the lubricant would cause unwanted friction. Oil caps are generally made of plastic, and over time, the threading can wear out. If the oil cap is not staying connected to your chainsaw, this is a sign to should replace it. It’s an easy fix; just screw the replacement cap back onto the tank in place of the old cap. This part comes straight from the manufacturer and is a genuine OEM part suitable for use on any Craftsman or MTD chainsaw. This item ships individually and does not require any additional tools to be installed. Installation should take no longer than just a few seconds.

This is a quality rear engine cover that is used on several types of string trimmers. The component is tightened onto the back of the trimer to offer protection and shielding to the engine. It is made of a durable material and comes with both the cover and four screws to attach it to a string trimmer. Over time, the rear engine cover can become damaged, broken, or lost and should be replaced to ensure the engine is protected.Check the rear engine cover for cracks and other damage before installing a new replacement part. First, remove the screws from the rear engine cover so it can be taken off of the string trimmer. An O-ring may be needed to create the proper clearance when installing the new rear engine cover. Make sure to properly tighten the screws on the cover before use.This rear engine cover is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The engine cover is designed to be compatible with string trimmers manufactured by Bolens, MTD, Yard Machines, Murray, and Craftsman.

This is a head cap that is typically used with a variety of. The head cap is tasked with protecting the line fitting and housing to prevent wear and tear that can be caused if the string trimmer makes contact with the ground. Since the head cap may make contact with the ground or other items, it can become damaged or broken. If these things occur, or the head cap has been lost, it will need to be replaced. If it is not, the line fitting and housing could be damaged and prevent the string trimmer from functioning properly.No tools are required to replace the head cap but work gloves are useful for the process. The original head cap screws on and off so it can be removed easily. After the old component has been taken off, the new head cap can be installed in its place. Before making the repair, the string trimmer should be powered off and the spark plug wire should be disconnected.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as a single component. The head cap is made to be used with string trimmers manufactured by Craftsman and MTD.

This genuine MTD belt cover can be used as a replacement part for lawn and garden appliances that are operated by small engines, such as lawn tractors, snowblowers, chipper shredders, leaf blowers, edgers, and lawnmowers. The purpose of a belt cover is to protect the gears, the belt, and the engine and its components from accumulating dirt and debris internally, which can cause individual components to malfunction and fall into disrepair.A belt cover will have to be replaced in the event that it can no longer protect the gears, the belt, and the engine. A belt cover can suffer from damage as a result of overuse or direct collision; this form of damage can limit the ability of the belt cover to perform its precautionary function. Remember that gloves must always be worn when handling, repairing, and operating outdoor equipment. This OEM belt cover part is compatible with the following brands: MTD, Craftsman, Cub Cadet, and Yard Machines. This part is sold individually.

This quality air filter cover protects and secures the air filter to the chainsaw. If the air filter cover is not in place, the air filter could become excessively dirty or damaged. Through use or impact, the air filter cover can become damaged and may need to be replaced. A quick visual inspection will tell whether there are holes or cracks in the cover that necessitate a replacement.This air filter cover replacement requires no tools. The air filter cover comes with small tabs that can be used to secure it in place over the air filter. Tug on the original air filter cover and pull it out of its place before pressing the new one into place using its plastic tabs. Reassemble any other components before use.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The air filter cover is designed to be used with chainsaws manufactured by Poulan, Poulan Pro, and Craftsman.