Craftsman Cap, Lid & Cover

This is a head cap that is typically used with a variety of. The head cap is tasked with protecting the line fitting and housing to prevent wear and tear that can be caused if the string trimmer makes contact with the ground. Since the head cap may make contact with the ground or other items, it can become damaged or broken. If these things occur, or the head cap has been lost, it will need to be replaced. If it is not, the line fitting and housing could be damaged and prevent the string trimmer from functioning properly.No tools are required to replace the head cap but work gloves are useful for the process. The original head cap screws on and off so it can be removed easily. After the old component has been taken off, the new head cap can be installed in its place. Before making the repair, the string trimmer should be powered off and the spark plug wire should be disconnected.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as a single component. The head cap is made to be used with string trimmers manufactured by Craftsman and MTD.

This quality air filter cover protects and secures the air filter to the chainsaw. If the air filter cover is not in place, the air filter could become excessively dirty or damaged. Through use or impact, the air filter cover can become damaged and may need to be replaced. A quick visual inspection will tell whether there are holes or cracks in the cover that necessitate a replacement.This air filter cover replacement requires no tools. The air filter cover comes with small tabs that can be used to secure it in place over the air filter. Tug on the original air filter cover and pull it out of its place before pressing the new one into place using its plastic tabs. Reassemble any other components before use.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The air filter cover is designed to be used with chainsaws manufactured by Poulan, Poulan Pro, and Craftsman.

This is a replacement oil cap for a variety of small gasoline-powered tools they build. These devices include power saws, chainsaws, trimmers, and pruners. The oil cap is tethered to the oil tank, granting easy access to the engine oil for filling or replacement while preventing outside contaminants from getting into the oil basin and, thus, the crankcase. While the cap is not a moving part, it is one of the most exposed pieces of this work equipment. As such it collides with multiple heavy objects such as other tools, trees, cement structures, and truck beds. This type of wear and tear can cause the interior threads of the cap to warp so that the cap cannot be closed tightly. The cap can also be damaged so that it leaks. For safety reasons as well as for the proper operating condition of the equipment, a damaged oil cap should be replaced immediately. Make sure when removing the old cap that the tether is completely freed from the power tool, and make sure the new tether is properly attached. This replacement cap is a genuine OEM part, built to the same specification as the factory original piece and fits Ryobi and Poulan machines.

This is a fuel cap that is used with several types of small engine lawn and garden equipment. The purpose of the fuel cap is to make sure that all gasoline in the fuel tank stays in place and there are no leaks present. The fuel cap can experience wear and tear over time or become cracked, broken, or damaged if it impacts other items. If fuel can be smelled through the cap, if the cap doesn't tighten, or if it is otherwise visibly damaged, the fuel cap should be replaced.Prior to replacement or even removing the fuel cap, the equipment should be placed in a well-ventilated area. It's also important to disconnect the spark plug wire to create a safe environment. Empty any fuel in the tank into an appropriate container before moving on. Once empty, you can replace the old cap with a new one.This is a genuine OEM replacement component that is directly sourced from the manufacturer. It is sold as a single fuel cap. The part is created to be compatible with string trimmers, hedge trimmers, and leaf blowers manufactured by Poulan, Poulan Pro, and Craftsman.

This replacement part includes one fuel cap assembly and is compatible with specific models of gas-powered blowers and trimmers. This part is made of high-quality plastic. It consists of a black cap that is approximately 2 inches in diameter with a retainer connection to keep the cap from falling on the ground. The cap is meant to cover the fuel tank's fill nozzle. Replacing a lost, leaky, or damaged cap won't require any tools. This original OEM part is designed to deliver a perfect fit for compatible equipment. It is compatible with outdoor power equipment from Craftsman, Husqvarna, Poulan, and Weed Eater. This replacement part is sold individually.

This replacement part is a gear cap. This is a genuine replacement part made by Husqvarna. This part is small but used to keep different gears within the lawnmower safe and secure during use. This part is made of durable plastic and meant to be a strong protector for many gears. A new gear cap might be needed if the current one is missing or damaged in any way. This can include being dented, bent, cracked, or chipped. If the gear cap is not able to stay in place, it might be time to replace it. Be sure to wear work gloves during this repair. It is also recommended that the user refers to the appropriate user manual before replacing this part. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit and long-lasting use.

This replacement part is a dust wheel. This is a genuine replacement part made by MTD. This part is used to help prevent wheels from becoming too dusty or dirty when not in use. A new dust wheel might be needed if the current on is missing or damaged. If the dust wheel is torn or unable to close properly, it might be time to replace it. This is a fairy simple repair as the user should be able to slip the dust wheel on over the current wheels. Be sure to purchase the correct amount as these are sold individually. Refer to the user manual for more instructions on how to replace this specific part. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit.

This hub cap is for use with select walk-behind mower models. The hubcap serves the same purpose as those found on automobiles. They serve to protect the wheel and to reduce the amount of dirt, debris, and moisture that collects on the wheel hub. The hub caps are simple parts, but if they are missing or damaged, the owner will want to replace them.The hub caps are made from durable plastic. They can handle the regular use that a mower sees without trouble, but they could still become damaged. They might become loose and need to be replaced, as well. Removing the old hub caps and adding new ones is a fast and simple repair.These hub caps will work with certain mower models from MTD, Ryobi, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Husky. The hub caps are sold individually. Owners may need to buy more than one. This is a genuine OEM replacement part sourced from the manufacturer.

This is a replacement log splitter fender directly from the manufacturer. The fender protects and covers the wheel to help prevent any object from disrupting the wheel's motion or damaging the wheel itself. Fenders can crack and break from regular use. If any heavy object falls onto the fender, the wheel will be kept safe. However, if fender is cracked, it will need to be replaced to avoid wheel damage. Fenders can be replaced relatively easily. Depending on the model, the wheel may need to be removed. Jack up the log splitter to remove the wheel. The fender is held in place by three bolts which a socket wrench can remove. Once the wheel is off, remove the old fender and replace it with the new one using the same bolts. If the bolts are in rough shape, consider replacing them. Replace the wheel and lower the jack to complete the repair. The fender is a genuine OEM replacement part and is designed to be used with MTD, Troy-Bilt, and Yard Machines brand log splitters.

This part is a replacement air cleaner assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended for use as a replacement for a broken, worn, or defective air cleaner assembly on various models of blowers. This air cleaner assembly includes the base, cover, and the foam air filter itself. This part helps to make sure that dirt, debris, and contaminants are filtered out of the air as it enters the engine so it doesn't have a negative effect on the equipment. Air filters should be cleaned regularly and replaced when worn or old. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this air filter assembly, the appropriate owner's manual and equipment diagrams should be referenced. This air filter assembly is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with blower models that have been manufactured by MTD and Craftsman.

This genuine OEM air filter assembly is a complete unit that aids in filtering the air that comes into the engine while the trimmer is in use. The plastic housing protects a foam filter that catches dust and debris. Over time, air filters become clogged with regular use and are usually replaced as a part of routine maintenance. In the event that the air cover or base becomes damaged, however, a replacement of the entire assembly may be needed. This part can do the job for compatible machines. This OEM air filter assembly is manufactured by MTD and meets exact standards for original equipment manufacturing. It is compatible with many trimmers from MTD and Craftsman. The replacement of the air filter assembly requires a screwdriver to remove the mounting screws of the old base and secure the new unit in place. Be sure to allow the engine to cool completely before doing any repairs. Since air filters are known to clog, it may be a good idea to purchase an extra one to have on hand in case of emergencies. This is sold as an individual unit and includes the foam filter along with the plastic housing.

This genuine safety switch cover is designed to be used in select chippers as a durable plastic part that provides protection for the switch when the unit is in use and being stored. The safety switch is responsible for keeping the user safe while the chipper is in operation. if something goes wrong, the safety switch can be engaged, which will shut the unit down immediately. Without the plastic cover, this switch is exposed to potential impacts and other damage. It will be important to replace the safety switch cover as soon as possible to prevent further damage. This durable plastic part is made to exact OEM standards and fits machines from MTD, Troy-Bilt, Cub Cadet, and Yard Machines. It will require a screwdriver to replace, but the screws used to install the part will require a separate purchase. The safety switch cover should be replaced when the unit is off and the power has been disconnected so that no accidents occur. It will also be important to wear gloves and eye protection when working on outdoor equipment like chippers and splitters for safety.

This air filter cover is a genuine OEM replacement part sourced directly from the manufacturer. It is designed to fit various lawn and garden engines. The air filter cover is a durable plastic piece that snaps to the machine to cover the air cleaner and filter to protect them from external dirt and debris that would shorten the filter's lifespan. This cover is exposed to the elements, and may be damaged by rocks and other debris during machine use. Normal wear and tear due to age can also lead to the cover's damage. If the cover is damaged, it should be replaced. The machine should not be operated without a functional air filter cover.Wear gloves when doing any work on the machinery. Unsnap the cover and remove it from the machine. Remove the spark plug before starting to prevent accidental engine operation. While the cover is off, check the air filter and air cleaner. If necessary, change these out while the cover is being serviced. Snap the new cover into place. This air filter cover is made of durable black plastic. It is sold as an individual unit that is compatible with tiller engines and other small engines manufactured by Cub Cadet, MTD, and Yard Machines.

This air filter cover is a genuine Husqvarna part, sold individually. This air filter cover can be used as a replacement part for chainsaws. The purpose of an air filter cover is to prevent damage to the air filter; the air filter blocks the motor from taking in harmful external materials such as dirt, debris, and pebbles. Air filter covers are often replaced within the lifespan of a chainsaw as they can be subject to general wear and tear over time. If there are visible punctures, rips, or signs of erosion to the material, the air filter cover should be removed immediately and replaced with this genuine OEM replacement part. A broken air filter cover could cause further damage to the engine. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This air filter cover is compatible with the following brands: Husqvarna, Poulan, and Craftsman.