Craftsman Hose, Tube & Fitting

The fuel line is used to carry fuel through the machine, and it must be in good condition. As fuel line parts age, they are prone to damage. In some cases, they might crack, which could result in a fuel leak. Other times, the ends of the tube might not fit properly, even when they are clamped down. Eventually, the fuel line will need to be replaced. This is a relatively simple job, which will require only a pair of pliers to complete. This replacement fuel line kit is sold individually. This OEM kit will include the rubber tube as well as two metal clamps for attaching the line to the machine. The fuel line may be used with snowblowers, lawnmowers, tillers, leaf blowers, log splitters, wood chippers, and other small engines, It will work with machines from many different brands, including MTD, Yard Machines, Troy-Bilt, Yard-Man, Bolens, Cub Cadet, and Husky.

This part is specifically designed for use with chainsaws. This tube intake is designed to create a flexible path between the adapter and carburetor, ensuring efficient equipment functionality. If the tube intake becomes worn, detached, or cracked, the carburetor may not be able to properly mix the correct ratio of air and fuel, causing the engine to misfire or underperform. This tube intake is a genuine OEM replacement part that has been sourced directly from the manufacturer. This tube intake is designed to fit various different models of Husqvarna and Poulan chainsaws. Please note this part is sold individually.

The washout port helps to make cleaning a mower deck easier and it is used on mowers and tractors. Users should wash the deck of the mower to reduce buildup. Doing so will help owners to extend the life of the mower deck. The washout port is the area that attaches to the deck of the machine. Owners can attach a hose and clean away grass and debris that have built up under the deck.The washout port is made from metal and is durable. However, there could still be a need to replace it in the event it becomes damaged or corroded. Replacement of the washout power is relatively simple. It will require the use of a socket set and a wrench set.This washout port is a genuine OEM replacement part for use with certain models of lawn tractors from Husqvarna, Craftsman, Jonsered, and Poulan. It is sold individually.

This OEM lower leaf blower tube attaches to the upper blower tube to create a long tube used to project the air from the blower. The lower leaf blower tube is the part that is located farthest from the machine itself. The upper leaf blower tube is located closest to the machine.The lower leaf blower tube may need to be replaced if it is lost or if the plastic is broken for any reason. If broken, it cannot be repaired but must be replaced. Remember to wear gloves when operating or replacing parts on any lawn machine equipment.This is a genuine Husqvarna part sourced directly from the manufacturer. This lower leaf blower tube is compatible with leaf blowers manufactured by Husqvarna, Craftsman, Poulan, and Weed Eater. Please note that this is sold individually and only includes the lower tube; the upper tube must be purchased separately in the event that it's needed.

This replacement part is a tube blower and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Tube blowers are typically found on leaf blowers and allow the user to direct high speed air toward the debris they need cleared. A new tube blower might be needed if the current one is damaged or broken in any way including being cracked or dented. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This part is a high speed restrictor nzle that is used on blowers. The restrictor style of nzle concentrates the air stream for increased power by acting as a funnel. This nzle is twisted onto the lower blower tube. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Use caution when working with any outdoor power equipment.A new high speed restrictor nzle may be needed if the original is cracked, broken, or damaged in any way. If the nzle will not turn to lock into the lower blower tube, both parts should be inspected to determine which component needs to be replaced. This high speed restrictor nzle is a genuine Husqvarna part. It is sold individually. This specific high speed restrictor nzle is compatible with blowers that are manufactured by Craftsman, Husqvarna, Poulan, McCulloch, and Weed Eater.

This is a replacement hose adapter for use with chippers and chipper shredders. These machines help make yard cleanup easier by turning branches and twigs into mulch. Often, hoses are attached to the machine to make the cleanup even easier. The hose adapter ensures that hoses will fit onto the machine properly. If the adapter being used currently is not working properly, the hose might not provide proper suction.These pieces are made from plastic, and they are typically used outside. They could become damaged, cracked, and broken. They could even be lost and will require a replacement. The adapter does not require tools and should fit easily onto the machine. Owners should be able to add it in a matter of minutes.This replacement hose adapter can work for models of machines from MTD, Troy-Bilt, and Cub Cadet. It is a genuine OEM replacement part that has been sourced right from the manufacturer. This adapter is solid individually.

This part is a replacement grease fitting. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current grease fitting is defective or broken, this part can be used as a replacement. It is intended for use with a variety of chipper models.The grease fitting feeds lubricants into the equipment's bearings. This part will require replacement with a genuine OEM part if broken, detached, or rendered ineffective in any way. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this grease fitting, the appropriate owner's manual and equipment diagrams should be referred to. This grease fitting is suitable for use on a variety of chipper models manufactured by MTD, Craftsman, Troy-Bilt, and other brands. It is a genuine OEM part and thus is made of high-quality, durable materials. Part sold individually.

This is a fuel line assembly that is made to be used in Craftsman and MTD string trimmers. It is composed of strong black and white plastic. The fuel line takes extra fuel and brings it to the fuel tank when the primer bulb has been engaged and the carburetor is primed. Time and regular use can lead to clogging or cracks in the fuel line assembly, which can lead to serious engine issues. If these problems are present, the fuel line assembly needs to be replaced.Make sure to drain any gasoline out of the fuel tank and disconnect the spark plug wire before starting the replacement process. Remove the original line from the carburetor and fuel tank before attaching the new line and using the string trimmer.This fuel line assembly is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The fuel line is made for use with string trimmers manufactured by Craftsman and MTD.

This replacement part is a lawn hose. It is a genuine replacement part made by MTD. This lawn hose is similar to a vacuum hose in that it is able to collect leaves and other debris and dispose of them into the collection bag. This makes it easier for the user to dispose of the items rather than use another device such as a leaf blower. A new lawn hose might be needed if the user notices the current one is not as effective as before. If the hose is unable to connect it might be time to replace it. It is also possible that the hose can become worn down or damaged over time and will not be able to effectively collect debris using the suction force. This is a genuine OEM replacement part and is sourced directly from the manufacturer and is sold individually.

This replacement part is a nzle assembly. This is a genuine replacement part made by MTD. Nzle assembly and is used in different machines and appliances. The nzle is able to open and close when needed based on the user's desired settings. A new nzle assembly might be needed if the current one is damaged or missing. This can be from normal wear and tear over time. The nzle is susceptible to damage and should be replaced if it is not up to working standard. Work gloves are recommended for this repair as pieces can cause injury. Refer to the user manual for more specific information before attempting to replace this part. This nzle assembly is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

This fuel line kit offers a genuine OEM replacement for select models of blowers. The fuel system includes intake and return lines as well as a vent line. These are responsible for moving the fuel throughout the engine between the fuel tank and the carburetor. Over time, the plastic or rubber lines can be damaged or become brittle due to constant exposure to extreme temperatures. If the fuel lines crack or break, they will need to be replaced before the equipment can be used again. It is usually best to replace all fuel lines at the same time, which is what this fuel line kit can do. This genuine replacement fuel line kit is designed for use with select Husqvarna blowers. The fuel line kit includes all fuel intake and outlet lines, the fuel filter, grommet, and primer bulb. It is sold as a single unit and saves the expense of buying all the parts separately. The fuel system should be completely drained before working on or replacing the fuel lines and other components. Allow the engine to cool and use hand and eye protection for safety during all repairs.