Electrolux Drawer, Shelf, Pan

This is a right-side tilt-out end cap that replaces a damaged or missing end piece on a refrigerator/freezer tilt-out bin. Restores secure mounting and proper pivoting of the bin for smooth opening and closing. What it does:

• Serves as the right end support for a tilt-out bin, providing the pivot point and cosmetic trim
• Keeps the bin aligned so it opens and closes smoothly
• Replaces cracked, broken, or worn end caps that allow the bin to sag or fall out
• Helps prevent rattling and excessive play of the tilt-out bin

• One right-side tilt-out end cap

• High-level snap-in or screw-mount replacement; remove the bin and follow OEM instructions
• Remove stored items before servicing and support the bin while replacing the cap
• Use basic hand tools; avoid forcing parts to prevent further damage

Left hand side. For the right hand side order 241674402

This ice cream shelf rail guides and secures the freezer's ice cream shelf so tubs stay level and accessible. It restores proper shelf alignment and prevents sliding or rattling of the ice cream compartment shelf. What it does:

• Holds the ice cream shelf in place so frozen goods stay stable during door movement
• Guides shelf slides to keep the shelf aligned and prevent binding
• Reduces shelf rattling and noise from the ice cream compartment
• Helps restore proper shelf seating after a broken or worn rail

• High-level replacement; remove shelf and slide to access rail mounting points
• Use common hand tools; support shelf while loosening or tightening fasteners
• Disconnect power only if working near electrical components; exercise caution with sharp edges
• If screws or clips are missing or damaged, replace them before final reassembly

This slide crisper cover is the glass shelf that sits above the refrigerator crisper drawer, helping protect produce and keep cold air circulating. It restores a smooth sliding surface and a finished interior appearance. What it does

• Replaces a cracked, chipped or missing glass cover that sits over the crisper drawer
• Provides a stable, low-profile shelf for storing fruits and vegetables
• Allows the crisper drawer to slide smoothly when in place
• Helps keep food separated and contained, reducing spills onto lower compartments

• One slide crisper cover

• Remove food and the crisper drawer before installing to avoid damage or injury
• Lift the old cover straight up to remove; set the new glass into the tracks so it seats evenly
• Handle glass with care and wear gloves to protect hands from sharp edges
• Check tracks for obstructions or damage before forcing

This ice cream shelf rail secures the small shelf/bin on the freezer door so tubs and containers stay in place. It restores the door bin edge that holds lightweight frozen goods and keeps items from shifting during normal use. What it does:

• Replaces a cracked, broken or missing freezer door rail that allows containers to fall or tip
• Provides a stable lip for ice cream tubs, butter, and other small frozen items
• Helps restore proper fit and appearance of the freezer door storage area
• Fits into the existing door bin mounting points and holds the bin edge securely

• One ice cream shelf rail

• Unplug the appliance or shut off power before servicing to avoid electrical hazard
• Remove the door bin or ice cream shelf per your model's instructions to access the rail
• Typically snaps or screws into place; keep original fasteners if present and reuse when possible

This hanger-shelf glass is the replacement glass support used to hold and stabilize a refrigerator shelf. It restores a secure, level surface for stored items and replaces cracked or missing shelf supports. What it does:

• Supports and secures the refrigerator glass shelf to its hanger/rail
• Keeps the shelf level to prevent stored items from sliding or tipping
• Replaces broken, cracked or worn hanger supports that cause shelf instability
• Helps restore proper shelf alignment and safe storage inside the compartment

• One hanger-shelf glass replacement

• Handle glass carefully and wear cut-resistant gloves to avoid injury
• Remove shelf contents and the damaged shelf before installing the replacement
• Follow the appliance manufacturer's instructions for re-seating the glass into the hanger/rails

Right hand side. For the left hand side order 241674401

This tilt-out rack is the refrigerator door shelf that holds small items and lets you access them easily by tilting forward. It restores secure storage on the door and keeps items from falling when the shelf is damaged. What it does:

• Provides a shallow, front-tilting shelf for small containers, butter, or condiment storage
• Keeps door-stored items contained and easy to reach
• Replaces cracked, warped, or broken door shelves that cause items to fall
• Restores proper fit and function so the door closes smoothly

• Remove all items from the door and work with the door open on a stable surface
• Tilt or lift the old rack out per the OEM door-shelf removal method; avoid prying with metal tools
• Handle edges carefully; some racks and mounting clips can be sharp or brittle
• Follow the refrigerator manufacturer's instructions for reinstallation and parts compatibility

This spill-safe glass shelf replaces a cracked, chipped, or stained refrigerator shelf and helps contain spills for easier cleanup while restoring usable storage space. Ideal when a shelf no longer holds items securely. What it does:

• Replaces a damaged or missing refrigerator shelf so you can store items safely.
• Helps contain spills and drips on the shelf surface to limit mess to one area.
• Provides a flat, stable surface for food and containers.
• Restores original appearance and functionality to the shelf area.

• Remove all food and loose items from the shelf area before replacing.
• Carefully slide the shelf into the existing support rails or brackets until it seats securely.
• Handle the glass with care and wear gloves to avoid cuts during installation.

This replacement freezer shelf restores stable, organized storage in the freezer compartment. Replacing a broken or missing shelf helps maximize usable space, keep items level, and support proper airflow for consistent performance.

• Provides a sturdy surface to store and organize frozen foods
• Seats in the factory side supports for correct spacing and fit
• Helps maintain air circulation between shelf levels
• Typical symptoms: broken or sagging shelf, items tipping, shelf won't stay seated, or a missing shelf

• Remove or secure food from the area where the shelf installs
• Align the shelf with the side rail slots and slide or seat it fully into place
• Confirm both sides are engaged and the shelf is level before loading
• Handle carefully; wear gloves to protect hands

This replacement bin door restores the front panel for a refrigerator crisper or storage bin, keeping produce secure and improving drawer function. It replaces a cracked or broken door so the bin closes properly. What it does

• Replaces a damaged or cracked bin/front door that won't stay closed
• Restores proper closure so contents stay contained and drawers slide correctly
• Prevents rattling or snagging caused by broken door edges or missing catches
• Helps maintain an even internal compartment by keeping the bin sealed from drawer gaps

• One replacement bin door

• Disconnect power and remove food from the drawer before starting
• Remove the bin/drawer per your manual to access and detach the old door
• Align the replacement door and snap or secure it into the factory mounting tabs; avoid forcing parts
• If you encounter broken mounts or clips, inspect and replace any damaged fasteners for a secure fit

This flat freezer shelf provides a stable surface for organizing frozen foods and maximizing usable space in the freezer compartment. Durable and easy to clean, it replaces worn or damaged shelving to restore proper storage. What it does:

• Replaces a damaged, bent, or missing freezer shelf so items sit level and storage is restored
• Supports frozen food containers, packages, and baskets to prevent collapsing or sliding
• Helps maintain airflow by keeping items organized and off the compartment floor
• Reduces risk of spills and messy defrosting by providing a stable shelf surface

• One replacement freezer shelf

• Turn off power to the appliance and empty the freezer compartment before installing
• Slide shelf into the factory support rails or brackets until it rests securely
• Do not force the shelf into place; check that any stops or clips align with factory mounts
• If your shelf uses mounting clips or supports, verify they are present and undamaged before installation

This shelf channel is the metal/plastic support that secures and aligns a refrigerator shelf or door bin, helping keep stored items stable and properly positioned. It restores proper shelf fit and prevents sagging or misalignment. What it does:

• Provides a secure mounting track for a refrigerator shelf or door bin
• Supports shelf weight to prevent bowing, shifting, or falling
• Keeps the shelf aligned so items sit level and doors close smoothly
• Helps restore original shelf fit after damage or wear

• One shelf channel mounting piece

• High-level replacement; inspect adjacent clips and fasteners and replace if damaged
• Use proper hand tools; avoid overtightening to prevent cracking
• Disconnect power only if working near electrical components; otherwise power removal is not typically required