Electrolux Ice Bin, Bucket, Or Tray

The Ice Container is an OEM replacement part for Frigidaire refrigerators. It is responsible for storing ice produced by the ice maker.

Causes of a bad ice container can include wear and cracks that develop over repeated use and cleaning. Minerals or scale deposits may also accumulate inside over time.

Symptoms of a bad ice container include:

• Ice spilling or leaking out of the container 
• Cracks or breaks that compromise the storage cavity
• Chipping of the plastic coating inside the container

This OEM Frigidaire replacement part is compatible with refrigerators from Electrolux, Gibson, and Kelvinator as well.

This is an ice bin that is used on refrigerator and freezer units. The purpose of this part is to store the ice that has already been made so that it is ready for dispensing. The auger is included with this part, which is the component that drives the ice out of the freezer for dispensing. Over time, the white plastic material that the bin is made of may begin to crack or break due to exposure to extreme temperatures over time. If this is the case, it will need to be replaced. If the auger no longer functions, it could have become damaged and this part will also replace the auger itself. Wear work gloves when replacing this part.This ice bin is compatible with refrigerator and freezer units that have been manufactured by Kenmore Elite, Kenmore Pro, Kenmore, and Frigidaire. It is sold individually. This part is sourced directly from the manufacturer.

This ice container assembly stores ice in the freezer and feeds it to the dispenser. Replacing a cracked or stripped bin helps restore smooth, reliable dispensing of cubed or crushed ice from your refrigerator.

• Holds finished ice beneath the icemaker and connects to the auger drive to move ice to the door chute
• Internal mechanism advances ice and enables crushed-ice operation when selected
• Helps resolve no or intermittent ice dispensing, auger slippage, or inconsistent cubed/crushed output
• Direct replacement for damaged or cracked ice buckets

• Disconnect power and turn off the icemaker; wear cut-resistant gloves
• Lift out the old bin; discard clumped ice and clear any jams in the chute
• Align the auger drive coupling and slide the new assembly fully into place
• Restore power and test both cubed and crushed dispense modes

This OEM replacement part is an ice container for refrigerators. The ice container is the plastic bucket that holds the ice that is made by the icemaker. Over time, an ice container can become damaged due to excessive wear and tear. If the ice container is cracked or broken to the point where it can no longer hold ice, it will need to be replaced.To replace the ice container, start by unplugging the refrigerator. Once unplugged, proceed to open the freezer door. Locate the two mounting screws that attach the ice container to the icemaker. Once found, proceed to unthread the screws to remove the old container. After pulling the old container out, slide the new one in place and fasten the mounting screws that secure it to the icemaker. This genuine replacement part is sourced directly from the manufacturer and is sold individually. It is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, and Westinghouse brand refrigerators.

This replacement refrigerator container restores a secure, functional storage compartment so items stay organized and easy to access. Replace a cracked or broken container to regain proper capacity and a snug, reliable fit.

• Provides the designated storage space within the refrigerator or freezer section
• Helps keep items organized and prevents shifting or spills when opening/closing
• Replace if cracked, warped, or if mounting tabs are broken
• Common symptoms: bin won't stay seated, items fall out, reduced usable storage, visible damage

• Disconnect power and remove items from the area before servicing
• Carefully lift/slide the old container out; transfer any reusable trim as designed
• Seat the new container fully so tabs/rails engage evenly
• Avoid forcing cold plastic; let the compartment warm slightly to reduce risk of cracking

This ice container holds and stores ice made by the freezer's icemaker so you have accessible, neatly contained ice for dispensing and use. Durable molded plastic keeps ice contained and aligned for smooth dispensing. What it does

• Collects and stores ice produced by the icemaker, preventing loose cubes from scattering
• Guides ice toward the dispenser area or door bin for reliable access
• Replaces cracked, warped, or discolored bins that can catch on the dispenser or allow spillage
• Helps maintain sanitary storage by keeping ice separated from other freezer items

• One ice container / ice bin

• Disconnect power to the appliance before any service to avoid risk of injury
• Remove the old ice bin by sliding it out from the freezer compartment; align and slide the new bin into place
• Handle the bin carefully to avoid cracking; do not force into position
• If the ice dispenser doesn't operate after install, check the icemaker and dispenser components separately

This ice tray assembly replaces a damaged or cracked ice-making tray to restore proper ice formation and release. It fits into the ice maker housing and provides a stable mold for producing and dispensing ice cubes. What it does:

• Forms and holds water in individual cavities so the ice maker can freeze standard ice cubes
• Releases cubes to the ice storage bin when the ice maker cycles
• Replaces worn, cracked, or warped trays that cause leaking or misshapen cubes
• Helps prevent ice sticking that can block automatic dispensing or harvesting

• One ice tray assembly

• Disconnect fridge power before removing the old tray or working on the ice maker
• Remove the ice bin or access panel as needed to reach the tray; handle carefully to avoid damage
• Align tray tabs and seat fully in the ice maker housing until it clicks or sits flush
• If ice production issues persist after replacement, test the ice maker cycle and water fill.

This ice container is the replacement bin assembly that collects and stores ice made by the refrigerator ice maker, keeping cubes contained and ready for dispensing or access. Fits dispenser and non-dispenser styles where this bin design is used. What it does

• Holds and stores ice made by the ice maker so cubes are contained and easy to access
• Guides ice toward the dispenser or cabinet opening to help consistent delivery
• Replaces cracked, warped or damaged bins that cause ice to spill or jam
• Helps prevent ice from falling into the freezer compartment or blocking the ice maker

• One ice container assembly

• High-level swap: remove any remaining ice, slide out the old bin, and slide the replacement into place
• Power-off the appliance or disable the ice maker/dispenser per your model instructions before working near electrical components
• Handle with care to avoid damaging the plastic tabs and alignment features used to secure the bin

This ice container assembly holds and dispenses ice made by the freezer's icemaker, keeping cubes contained and ready for use. Replaces a cracked, warped, or missing ice bin to restore proper ice storage and delivery. What it does

• Collects and stores ice produced by the automatic icemaker.
• Guides ice toward the dispenser or pickup area so cubes feed reliably.
• Prevents ice spillage and reduces clumping from broken or damaged bins.
• Helps the icemaker cycle normally when the bin is correctly positioned.

• High-level, tool-free removal/install on many models; your model's service instructions.
• Turn off power to the refrigerator before servicing to avoid injury.
• Handle carefully to avoid cracking the plastic; ensure the bin seats fully in its guides.
• If ice delivery issues persist after replacement, check the icemaker and dispenser components.

This replacement refrigerator storage container keeps food organized and contained so shelves stay tidy and items are easier to access. Durable molded plastic design restores usable storage space and helps prevent spills. What it does:

• Holds and organizes food items or produce to maximize usable shelf space
• Provides a removable bin for easy access and cleaning
• Replaces a cracked, broken or missing refrigerator bin to restore proper storage
• Helps contain spills and crumbs to simplify cleanup

• Remove fridge contents and shelves as needed before installing the bin
• Slide the container into its tracks or seating location until it rests securely
• Wash container with mild soap and warm water before first use
• Handle carefully to avoid chipping; do not use abrasive cleaners