Estate Support Parts

The Tub Suspension Pads are an OEM part for Whirlpool washing machines. These pads are designed to provide cushioning and stability to the washer tub, reducing vibration and noise during the wash and spin cycles. This kit contains three pads, each 2 1/4 inches long

Over time, the tub suspension pads can wear out or deteriorate, especially with frequent use or heavy loads. Exposure to harsh chemicals or unbalanced loads can also cause the pads to lose their effectiveness.

Symptoms of bad tub suspension pads include:

• Excessive vibration or shaking during operation
• Loud banging or thumping noises during the spin cycle
• The washer moving or "walking" across the floor
• Uneven or poorly balanced loads leading to inefficient washing

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Suspension Pad Kit is an OEM part for Whirlpool washers. It is a kit that includes 3 suspension pads designed to provide stability and reduce vibration during the washer's operation. These pads are designed to absorb shocks and prevent excessive movement.

You should replace the suspension pad kit if the pads become worn out or damaged. Causes of bad suspension pads can include regular wear and tear, overloading the washer, or continuous exposure to high levels of vibration and movement.

Symptoms of bad suspension pads include:

• Excessive shaking or vibrating during the wash or spin cycles
• Loud banging noises coming from the washer
• The washer moving or "walking" during operation
• Uneven or unbalanced loads despite proper loading

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Upper Dishrack Rail is an OEM replacement part for Whirlpool dishwashers. It guides upper racks in and out for easy access to dishes. 

Causes of faulty rails can include worn rollers, broken clips, or stress cracks in modules after repeated cycles. 

Symptoms of a bad upper dishrack rail include:

• Difficulty inserting or removing the upper rack smoothly   
• Off-track movement that impacts washing coverage
• Detached ends or segments that compromise stability

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Lower Spray Arm Support is an OEM replacement part for Whirlpool built-in dishwashers. Attached underneath the wash arms enclosure, this bracket securely anchors the rotating lower spray arm inside the lower dishrack.

Causes of failure involve cracking or stripping of securing clips allowing excessive movement during high-pressure spray cycles. Mineral buildup over time can also obstruct smooth operation.

Symptoms consist of:

• Detached lower spray arm failing to thoroughly rinse lower rack dishes
• Abnormal noises and vibrations from mobility during operation
• Ineffective cleaning even on light soil levels
• The lower spray arm not rotating or spinning freely during wash cycles

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

To order seal use WP8268340.

The Spray Arm Mount is an OEM part for Whirlpool dishwashers. This part allows the spray arm to rotate and spray water effectively to clean dishes. The mount ensures that the spray arm remains properly positioned and functions correctly during the wash cycle.

Causes of a bad spray arm mount can include wear and tear from frequent use, damage from heavy loads or improper loading of dishes, and exposure to harsh detergents and high temperatures.  

Symptoms of a bad spray arm mount include:

• The spray arm not rotating properly
• Poor cleaning results on dishes
• Unusual noises during the wash cycle
• The spray arm detaching or wobbling

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement mount secures the dishwasher's upper spray assembly in place, keeping it aligned so it spins freely and delivers consistent water coverage to the upper rack for dependable cleaning performance.

• Holds the up-spray/upper spray arm assembly securely inside the tub
• Maintains proper alignment and clearance for free rotation
• Common symptoms: upper spray arm loose or falls off, poor cleaning on the top rack, rattling from the arm striking the rack or tub, visible cracks in the mount
• Restores stable support after a worn or broken mount

• Disconnect power and water supply before servicing
• Remove the upper rack for access; release the old mount and transfer the spray arm if attached
• Seat and lock the new mount; verify the upper spray arm spins freely
• Run a short test cycle to confirm proper operation

This water inlet hanger secures the appliance's fill tube or line in the correct position, supporting a proper fill path and reducing strain on fittings. Replace a cracked or missing hanger to prevent movement, vibration, and potential leaks.

• Supports and positions the water inlet tube/line or inlet assembly
• Helps maintain alignment and sealing at the connection point
• Reduces vibration and prevents rubbing/chafing against surrounding parts
• Common symptoms include a loose or sagging inlet, rattling noises, chafed tubing, or drips from a misaligned inlet

• Disconnect power and shut off the water supply before servicing
• Access the inlet area and note the original hanger orientation and routing
• Remove the damaged hanger and mount the new hanger using the existing mounting points/fasteners
• Ensure the tube/line is secure and not kinked; restore service and run a brief test to check for leaks

Includes suspension pads.

This molded wire support clip secures wiring and small harnesses to the appliance cabinet or components to prevent rubbing, pinching, or contact with moving/heat-producing parts. It helps reduce chafing and electrical wear for safer, more reliable operation. What it does:

• Holds wiring harnesses and individual wires in place to prevent contact with sharp edges, motors, or heating elements
• Minimizes wire movement and vibration that can lead to chafing or broken conductors
• Helps maintain proper routing for consistent connections and component performance
• Commonly used where a small push-fit retainer is needed to secure low-voltage or signal wires

• One wire support clip as shown

• Disconnect power to the appliance before servicing to avoid shock or injury
• Push-fit installation: align clip over wire/harness and press into the mating hole or slot until it snaps in place; clip may require slight flexing
• Inspect surrounding wiring and routing for damage; replace any frayed or exposed wires before reassembly
• If the mounting hole or panel is damaged, use the correct replacement panel or a suitable repair to ensure a secure fit

Replacement plate that restores fit and finish for compatible Whirlpool appliances. Install to replace a cracked, warped, or cosmetically damaged plate and help maintain proper component alignment and appearance. What it does:

• Replaces a damaged or worn plate to restore the appliance's original coverage and appearance.
• Helps prevent gaps where food, grease, or debris can collect around the affected area.
• Maintains proper alignment and support for adjacent parts that rely on the plate for mounting or spacing.

• Disconnect power to the appliance before beginning any repair.
• Use basic hand tools and follow the OEM diagram for correct orientation and fastener locations.
• Inspect mounting hardware and any gaskets; replace separately if worn or damaged.

Includes both right and left hand sides.

This heater support secures the dryer heater assembly so it stays aligned and stable during operation, helping maintain proper airflow and heating performance. It's a direct-fit replacement designed to restore correct heater positioning. What it does:

• Holds the heater assembly in place to prevent shifting or contact with other components
• Helps maintain proper airflow path for efficient drying and consistent heat
• Reduces rattling, rubbing, or intermittent heating caused by a loose heater
• Works with the heater housing and mounting points to keep electrical and thermal parts separated

• Refer to the dryer's service manual or parts diagram for correct placement and orientation
• Disconnect power before starting work to avoid electrical shock
• Inspect surrounding clips, screws, and the heater assembly; replace any damaged fasteners

This support bracket secures and stabilizes appliance components to reduce movement and maintain proper alignment. A simple replacement that helps stop rattling and supports panels or assemblies so the appliance operates quietly and reliably. What it does

• Provides a stable mounting point to hold panels, housings or internal assemblies in place
• Restores proper alignment to reduce vibration, noise, and rubbing against adjacent parts
• Prevents sagging or movement that can lead to wear on connected components
• Useful when a bent, cracked or missing bracket causes loose panels or intermittent contact

• Turn off power to the appliance and unplug before starting work
• Use appropriate tools and retain all fasteners; replace any damaged clips or screws
• Compare the bracket to the original to confirm orientation and fit before final installation