Frigidaire Dishwasher Spray Arm & Related

Color: light gray. Each prong goes out about 10 inches from the center.

The Wash Arm Bearing is an OEM replacement part for Frigidaire dishwashers. It is a crucial component that supports and facilitates the smooth rotation of the wash arm during the dishwashing cycle. The wash arm is responsible for spraying water and distributing detergent solution evenly throughout the dishwasher tub, ensuring thorough cleaning of dishes.

Causes of a bad wash arm bearing include wear and tear over time, exposure to debris or hard water buildup, or physical damage due to impact or mishandling. A faulty bearing can lead to issues with the wash arm's rotation and water distribution.

Symptoms of a bad wash arm bearing include:

• Excessive noise or grinding sounds during the wash cycle
• The wash arm not rotating or spinning properly
• Uneven or incomplete cleaning of dishes
• Water not being distributed evenly within the dishwasher tub

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.

Includes one sprayarm.

This spray arm assembly distributes high-pressure wash water inside the dishwasher and spins to cover the racks. Replacing a cracked or clogged arm restores proper spray coverage for cleaner dishes and consistent wash performance. What it does:

• Rotates as water flows to spray dishes evenly across the tub
• Channels water from the circulation pump through precision jets
• Helps resolve poor cleaning results or spots left on dishes
• Addresses issues like a spray arm that won't spin, clogged nozzles, or visible damage

• 1 spray arm assembly

• Disconnect power at the breaker and turn off the water supply before servicing
• Remove the rack if needed to access the arm
• Release the locking tabs or unthread the retaining cap to remove the old arm
• Seat the new arm fully, secure the retainer, and confirm it spins freely before a test cycle

This is a replacement hex nut used to secure appliance components and fasteners. It restores proper fastening where a stripped, missing, or damaged nut causes loose or rattling parts. What it does

• Secures mating bolts or threaded studs to hold panels, brackets, or assemblies in place
• Stops vibration-related loosening that can cause rattling or misalignment
• Replaces corroded, stripped, or missing nuts to restore a safe connection
• Works wherever the OEM specifies this nut for fastening duties

• One replacement hex nut

• Disconnect power (and water, if applicable) to the appliance before servicing
• Use the correct size wrench or socket to avoid rounding the nut
• Tighten snugly but avoid overtightening; replace if threads are damaged

This upper spray arm feed tube routes water to the dishwasher's upper spray arm so the top rack gets cleaned. It replaces a worn, cracked, or clogged feed tube to restore proper spray distribution and cleaning coverage. What it does

• Delivers pressurized water from the dishwasher's pump to the upper spray arm for cleaning the top rack
• Prevents water bypass or reduced spray at the upper arm caused by cracks or buildup
• Helps resolve symptoms like poor cleaning on top-rack items or uneven spray patterns
• Works with the upper spray arm assembly to maintain normal wash performance

• Turn off power and water supply before any service; follow manufacturer safety guidance
• Access typically from the dishwasher tub's top area; remove the upper spray arm and any trim as needed
• Inspect adjoining seals and fittings; replace any damaged clips or grommets for a watertight fit

This upper spray arm circulates and directs pressurized wash water to the dishwasher's top rack for even cleaning and rinsing. Replacing a damaged or clogged arm restores proper water coverage and helps improve top-rack wash results. What it does:

• Spins and sprays water across the upper rack to reach dishes, cups and glassware
• Replaces cracked, broken or blocked arms that cause poor cleaning on the top rack
• Prevents uneven water distribution that can leave spots or food residue on upper-rack items
• Works with the dishwasher's wash pump and plumbing to maintain normal spray patterns

• Turn off power to the dishwasher at the circuit breaker before servicing
• Remove the upper rack and clear any debris or obstructions before installing the new arm
• Install by seating or fastening per the original hardware; ensure the arm spins freely and is not rubbing

This replacement nut is a small metal fastener that secures appliance parts and restores a safe, stable connection. It's a direct-fit replacement used where the original nut has worn or gone missing. What it does:

• Secures panels, brackets, or components to prevent movement and vibration
• Restores firm mechanical connections that can cause rattling or looseness
• Helps maintain alignment of moving parts for proper operation
• Prevents further damage from a loose or missing fastener

• Disconnect power and water before starting any repair
• Use the correct-size wrench or socket to avoid rounding the nut
• Tighten to a firm, hand-checked fit; do not overtighten to avoid stripping threads
• Replace the mating bolt/stud if threads are damaged