Frigidaire Dishwasher Switch

The Water Level Float Switch Assembly is an OEM replacement part for Frigidaire dishwashers. It uses a floating switch design to accurately sense water levels filling and draining during cycles. Proper level detection allows for optimized wash and rinse action and water volume control.

Causes of a bad float switch assembly can include wear and tear over many years of use, interfering with free float movement. Mineral or scale deposits may accumulate on float components, inhibiting functionality. Physical damage from impact could introduce leaks.

Symptoms of a bad float switch assembly include issues such as:

• Inability to properly detect water levels
• Long fill or drain times
• Failure to fill or drain completely
• Potential overflow or standing water issues
• Error codes pointing to level sensor faults

This OEM Frigidaire replacement part is also compatible with some Electrolux, Westinghouse, and Kenmore dishwashers.

The Pressure Sensor is an OEM part for Frigidaire dishwashers. It monitors the water pressure within the dishwasher to ensure optimal performance during the wash cycle.

Causes of a bad pressure sensor can include electrical faults, buildup of debris or mineral deposits, or general wear and tear from regular use.

Symptoms of a bad pressure sensor include:

• Poor cleaning performance
• Dishwasher not filling with water properly
• Error codes related to water pressure
• Dishwasher stopping mid-cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Pressure Switch is an OEM part for Frigidaire dishwashers. It plays a crucial role in monitoring water pressure inside the dishwasher, signaling the control module when to activate various components during the wash and rinse cycles. Overl or under pressure conditions could damage the dishwasher or prevent it from cleaning properly.

Symptoms of a bad pressure switch include: 

• Dishes not getting fully clean 
• Cycles not completing or getting stuck
• Error codes displaying
• Strange noises or leaks coming from the dishwasher

Causes of a bad pressure switch can be wear and tear over time, mineral buildup interfering with the switch's function or accidental damage from household chemicals or objects left in the dishwasher. 

This OEM Frigidaire replacement part is designed to function like the original part for reliable performance. It is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 
 

This switch assembly is used in select dishwashers to provide a precise open/closed electrical signal to the control. Replacing a worn or sticking switch helps restore consistent cycle operation and reliable responses from the affected function. What it does:

• Sends an on/off (open/closed) signal to the control for the related mechanism in your model
• Helps ensure the connected function engages only at the correct time
• Common symptoms of a failed switch can include: cycle won't start, intermittent stopping, or improper filling/draining behavior
• A sticking or heat-damaged switch may cause erratic operation or error alerts

• One switch assembly

• Disconnect power (and water supply if required by access) before servicing
• Access location is model-specific; photograph wiring and note terminal positions before removal
• Transfer or reuse existing mounting hardware as applicable; ensure firm terminal connections
• After install, check switch actuation and run a test cycle to normal operation

This replacement switch assembly restores proper signaling between the dishwasher's mechanism and the control, so selected functions register and cycles can start and run consistently. A worn or failed switch can cause intermittent or no operation. What it does:

• Provides the on/off signal the control needs when the mechanism is actuated
• Can lead to a dishwasher that won't start or stops mid-cycle when failing
• May cause options or selections to be unresponsive or require extra pressure
• Heat damage or a broken actuator on the switch assembly can indicate failure

• 1 switch assembly

• Disconnect power to the dishwasher before servicing
• Access location varies by model; refer to your model's parts diagram/service information
• Photograph wiring and move connectors one at a time to the new assembly
• Verify secure connections and proper wire routing to prevent pinching during reassembly

This switch assembly restores electrical on/off control for a specific appliance function. Replace a worn or failed switch to stop intermittent operation and return reliable control to the affected circuit. What it does:

• Provides the electrical on/off or function control for the appliance circuit.
• Replaces a failed switch that can cause intermittent operation or unresponsive controls.
• Helps resolve symptoms such as a function that won't start, no response from the control, or erratic switching.
• Connects to the existing wiring harness and mates with the original mounting points.

• Disconnect power to the appliance before beginning any work.
• Remove the appropriate access panel to reach the switch; note wire and terminal locations before disconnecting.
• Unplug the wiring harness or carefully detach terminals, swap the switch assembly, then reconnect securely.
• Restore power and verify the replaced switch operates the function correctly.

This door-mounted switch detects when a refrigerator/freezer door is opened and closes the circuit to control the interior light and door-sensing functions, restoring proper light and access control. What it does

• Opens/closes the electrical circuit when the door is closed or opened to turn the interior light on/off
• Restores normal interior lighting when a failed switch causes the light to stay off or on
• Helps the appliance detect door-open/closed status for related functions
• Compatible with common door-frame mounting and wiring harnesses used on many Frigidaire units

• One door switch assembly

• Disconnect power before inspecting or replacing the switch to avoid shock
• Verify correct connector orientation and secure mounting before restoring power
• Do not use part if wiring or connectors are burned or damaged; replace harness as needed

This push-button door switch detects when the appliance door opens and closes, enabling the interior light and informing the control system. Replacing a faulty switch restores normal door-sensing and light operation. What it does:

• Activates the interior light when the door opens and turns it off when closed
• Sends a door-open/closed signal to the appliance control so timed features behave correctly
• Commonly replaces a switch that causes the light to stay off or fail to turn off
• Helps eliminate intermittent lighting or door-sensing problems

• Disconnect power before starting any repair to avoid shock or injury
• Access may require removing the light housing or door trim; keep fasteners for reassembly
• Verify the old switch matches this part number and connector style before installing

A replacement selector switch that restores user control of temperature and function selection on compatible ranges and ovens. Designed to match OEM fit and restore reliable control response for common cooktop/oven functions. What it does

• Selects oven or burner functions when you turn the control knob.
• Routes user input to the appliance control circuits so the unit responds correctly.
• Commonly replaces worn or failed switches that cause unresponsive controls, no function selection, or intermittent operation.
• Helps stop erratic behavior like controls that click without changing settings.

• Disconnect power to the appliance before beginning any repair.
• Replacement typically requires removing the control panel and knob; handle wiring and connectors carefully.
• Verify knob orientation and switch alignment during reassembly.

This infinite burner switch controls heat output for a cooktop burner so you can adjust cooking temperature smoothly. Replaces a worn or failed control to restore variable heating response on compatible ranges. What it does:

• Regulates burner heat by varying power to the surface element for precise temperature control
• Commonly replaces switches that cause a burner to stay cold, not heat evenly, or only work at one setting
• Helps stop clicking, erratic heating, or loss of low/high heat range when the original switch fails
• Works as the user control interface behind the cooktop knob (requires matching shaft/terminal configuration)

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Verify shaft style and terminal layout match the original switch for proper fit and function
• Handle surrounding trim and glass cooktop pieces carefully to prevent damage during removal

A selector switch used to choose operating modes or settings on compatible Frigidaire appliances. Replacing a worn or failed selector restores reliable user control and lets the appliance respond correctly to setting changes. What it does:

• Acts as the user-facing control for selecting cycles, temperature, or function positions
• Routes power to the correct internal circuits based on the selected position
• Common symptoms: appliance won't change modes, selector feels loose or sticks, or settings don't engage reliably
• Helps restore accurate selection and repeatable operation when the original switch is faulty

• Disconnect power (unplug or shut off breaker) before attempting service
• Access may require removing the control panel or console; keep fasteners organized
• Avoid forcing the switch or contacts; inspect wiring and connectors for damage