Frigidaire Dishwasher Dishrack

The Rack Assembly is an OEM part for Frigidaire dishwashers. This assembly provides a stable and organized space for placing dishes, glasses, and utensils during the dishwashing cycle. 

Causes of a bad rack assembly can include rust or corrosion from prolonged exposure to water, physical damage from heavy or improperly placed items, and wear and tear over time. 

Symptoms of a bad rack assembly include:

• Dishes not staying securely in place
• Visible rust or corrosion
• Broken or bent tines
• Difficulty sliding the rack in and out

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement basket restores organized storage inside your appliance. It securely holds items in place to prevent tipping or falling through, helping you load, access, and clean with confidence.

• Provides a dedicated compartment to keep smaller items contained and upright
• Replaces a cracked, warped, or missing basket
• Helps prevent items from contacting moving parts or obstructing spray/airflow
• Common signs it's time to replace: broken tabs, split seams, or the basket no longer seats correctly

• Disconnect power before servicing
• Open the appliance and remove the old basket; retain any reusable brackets or rack components
• Seat the new basket fully into its designated location
• Do not overload; verify it's stable and clears moving parts before use

This is the complete lower dishrack that slides in and out on the tub rails. It provides a stable place to load plates, bowls, and larger cookware on the bottom level and restores smooth rolling and proper dish placement when the original rack is worn or damaged.

• Holds and organizes dishes on the lower level of the dishwasher
• Restores smooth rolling and proper alignment of the lower rack
• Common failure signs include broken or rusted tines, wobbling or derailed rack, and difficulty rolling the rack in/out
• Helps when dishes are not staying in place or the rack no longer supports loads properly

• Disconnect power before servicing
• Pull the old rack straight out of the tub; transfer any usable accessories if applicable
• Slide the new rack onto the existing rail tracks; ensure wheels are seated on both sides
• Test smooth movement and clear door closure before running a cycle

Used on the upper rack track

This small retainer clip secures a mating part in the correct position inside your appliance, helping prevent movement, premature wear, and noise. Replace a cracked, bent, or missing clip to restore a tight, reliable hold.

• Provides a positive hold to keep the component properly seated
• Maintains alignment to reduce vibration and rattling during operation
• Helps prevent parts from backing out or disconnecting over time
• Common signs of failure: loose or misaligned component, rattling, clip that falls off, or visible damage

• Disconnect power; if working near any water connections, also shut off the water supply
• Note the clip's original orientation and position before removal
• Use needle-nose pliers or a small flat-blade screwdriver to release/install; avoid deforming mating tabs
• Ensure full engagement and that the secured part is firmly held before reassembly and testing

This pair of upper-rack adjusters secures and guides the dishwasher's top rack, letting it ride smoothly on the track and maintain proper alignment for loading and cleaning. Replaces worn or damaged adjusters to restore stable rack movement. What it does

• Guides the upper rack along its rail and keeps the rack aligned during sliding
• Replaces broken or worn adjuster pieces that cause the rack to stick, wobble, or fall off the track
• Helps maintain correct rack height and position for even spray coverage and loading
• Restores smooth, quiet rack operation when original guides are damaged

• One right upper-rack adjuster and one left upper-rack adjuster

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Remove the upper rack and slide or pop off the old adjusters per the manufacturer's instructions
• Install the new left and right adjusters on their respective sides; verify smooth movement before returning the rack to service
• If fasteners or rails are damaged, replace them as needed; for model-specific procedures

The Rack Stop is an OEM part for Frigidaire dishwashers. It serves an important purpose by preventing loaded dishes from shifting forward during wash cycles.

Causes of a bad rack stop can include wear and tear from regularly loading and unloading dishes, as well as minor impacts that cause cracks or breaks. Over time, the mounting screws may also loosen.

Symptoms of a bad rack stop include:

• Dishes shifting forward during wash cycles
• Gaps appearing around the dish rack where dishes are not fully secured
• Noise from dishes banging together or rattling around more than usual
• Potential damage to more delicate dishware

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This is a replacement dishwasher rack assembly with factory-installed wheels. It restores smooth sliding and safe loading when the original rack is bent, rusted, or missing rollers—helping the rack glide properly and keep items positioned during the wash.

• Holds and organizes dishes, glasses, and cookware during cycles
• Integrated wheels ride on the tracks for easy loading and unloading
• Replace if tines are rusted/broken, wheels are cracked or missing, or the rack derails
• Helps prevent items from tipping and maintains consistent spray coverage

• Disconnect power to the dishwasher before servicing
• Open the door, extend the rack, release any rail end-stops, and remove the old rack
• Transfer any removable accessories from the old rack to the new one, if needed
• Slide the new rack onto the rails and reinstall end-stops; verify smooth operation

This lower dishwasher rack replaces a worn, bent, or damaged lower basket to restore secure support for plates, bowls and cookware so dishes load and wash as intended. Durable finish helps protect items from chipping. What it does:

• Supports and organizes dishes on the dishwasher's bottom level for proper water coverage
• Restores missing or broken rack rails and tie-downs that can allow dishes to shift
• Reduces contact damage from sliding or collapsed rack areas
• Helps ensure proper drainage and spray access to bottom-rack items

• One lower rack

• Remove dishes and unplug or turn off power to the dishwasher before servicing
• Slide out and detach old lower rack; align new rack on bottom rails and test smooth travel
• Use gloves to avoid sharp edges and protect the rack's coating during installation
• No special tools typically required; inspect rollers and tracks and replace if worn

This rack assembly restores a sturdy, properly fitting rack inside your appliance so items are supported and move smoothly on the rails. Replace a bent, rusted, or missing rack to keep loading safe and performance consistent. What it does:

• Provides a stable surface for loading items during use
• Aligns with factory rails for correct fit and smooth in/out movement
• Replaces racks that are bent, warped, broken, rusted, or missing
• Helps prevent snags or stains caused by damaged or flaking rack wires

• One rack assembly

• Disconnect power; allow it to cool completely
• Pull the old rack straight out of the rails; if your model uses rack stops or clips, transfer them from the original
• Slide the new rack into the rails until fully seated
• Verify smooth travel and proper clearance before use

Wire rack assembly that restores stable support and spacing for cookware or dishes in your appliance. Replaces bent, worn, or damaged racks so items sit level and slide smoothly for safer loading and more consistent results. What it does:

• Provides sturdy support for cookware, bakeware, or dishes and maintains proper clearance inside the appliance.
• Ensures smooth sliding and correct positioning so racks don't bind, tilt, or drop when pulled out.
• Replaces bent or corroded wires that can catch, scratch, or allow items to tip.
• Helps restore even airflow and consistent performance where rack position affects cooking or cleaning.

• Remove all food, dishes, and loose parts before installing; allow the appliance to cool if recently used.
• Wear gloves to protect hands from sharp wire ends; handle the rack carefully to avoid bending.
• Slide the rack into the designated tracks or supports until it seats fully; verify rollers or stops are aligned.
• Follow the appliance owner's manual or OEM instructions for final adjustments and safe operation.

This mounting bracket secures a small appliance component in place to restore proper alignment and stable operation. It provides a simple, durable replacement for worn or broken mounting points. What it does:

• Secures internal components or assemblies to the cabinet or frame to prevent movement
• Restores proper alignment so linked mechanisms operate smoothly
• Helps stop rattling or loose parts that occur when the original holder breaks
• Fits in the original mounting location and works with the appliance's factory hardware

• One replacement holder/mounting bracket as pictured

• High-level replacement — typically accessed by removing the related cover or panel
• Use appropriate hand tools; keep fasteners organized for reassembly
• Disconnect power (unplug appliance or shut off circuit) before starting any repair