Frigidaire Refrigerator Drawer, Shelf, Pan

Color: white. Measures about 11 inches wide by 4-1/2 inches high by 5 inches deep.

The Refrigerator Freezer Drawer Assembly is an OEM replacement part for Frigidaire bottom-mount refrigerators. It provides a pull-out storage solution accessible from the bottom of the refrigerator. The drawer assembly contains the necessary components to function as a freezer compartment.

Symptoms of a bad drawer assembly include: 

• Difficulty opening or closing the drawer  
• Improper freezing or frost buildup inside
• Temperature fluctuations within the drawer
• Water or air leaks causing freezer burn on contents

Causes may be related to wear and tear over time, particularly on moving parts. Damage from overloading or other mishandling could also impair operation. 

This replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore side-by-side refrigerator models.

Glass shelf assembly for side-by-side refrigerators. Includes glass surface and metal support brackets. Replace when glass is cracked or brackets are bent.

Left-hand support bracket that secures and aligns shelves or drawers inside your refrigerator. Replace if cracked, broken, or missing to restore stability.

The Shelf Support is an OEM part for Frigidaire refrigerators. Installed at set positions along the side walls, shelf supports provide sturdy surfaces on which to rest adjustable shelves or glass shelves. 

Causes of bad shelf supports can include general wear from repeated loading and unloading of shelves over time, as well as damage from accidental impacts.

Symptoms of bad shelf supports include:

• Shelves that wobble or sag in positions
• Difficulty inserting or removing shelves
• Small dents or breaks in the support surfaces
• Supports that are loosened from wall positions

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Supports the crisper cover glass in your refrigerator. Replace this side track or bracket if cracked, broken, or causing the cover to sag or drawers to misalign.

Replacement door bin for refrigerator. Mounts inside the door to hold bottles, jars, and condiments. Restores organized storage when cracked or broken.

Replacement shelf support for refrigerators. Secures and stabilizes shelves to hold stored items. Replace if cracked, broken, or worn from impacts or overloading.

Replacement deli drawer for your refrigerator's fresh food section. Restores organized storage for meats and cheeses when original is cracked or broken.

Replaces a broken, cracked, or missing door bin in your refrigerator. Snaps into door slots to restore organized storage for condiments, jars, and bottles.

This replacement door bin mounts on the inside of your refrigerator door to hold bottles, jars, and condiments. Replacing a cracked or loose bin restores safe, usable storage and helps keep items organized and accessible.

• Provides storage on the door to keep bottles and jars upright
• Restores capacity when the original bin is cracked, warped, or missing
• Helps prevent items from tipping or falling when the door opens/closes
• Common symptoms: bin falls off, won't stay seated, or has broken tabs/cracks

What's included: 1 door bin Install notes:

• Remove all items from the old bin; lift straight up to release from the door slots
• Align the new bin's tabs with the slots and press down until fully seated
• Do not force; re-align if resistance is felt to avoid damaging the door liner
• Place in the correct door position for your model; some bins aren't interchangeable between levels

This replacement crisper pan sits beneath the refrigerator crisper drawer to catch spills and support stored produce, helping keep the drawer area clean and stable. Fits as the OEM service part for compatible Frigidaire units. What it does:

• Supports the crisper drawer and helps keep fruits and vegetables stable.
• Collects spills and juices to prevent them from dripping into the cabinet below.
• Restores proper drawer seating when a cracked or warped pan prevents full engagement.
• Helps maintain a cleaner, more sanitary drawer area.

• Remove stored food and slide the crisper drawer out to access the pan.
• Lift or unclip the old pan per your refrigerator's service instructions and slide the replacement into the same position.
• Handle carefully and inspect mating rails and seals; replace any damaged hardware before reassembly.
• No special tools required for most models; wear gloves if removing a cracked pan.

Replacement dairy door cover for your refrigerator. Snaps into place to restore the finished look and prevent items from falling. Replaces cracked or broken doors.

Structural support that holds and aligns shelves or racks in your side-by-side refrigerator. Replace when worn, broken, or missing to restore stability.

The Drawer Glide Gear is an OEM replacement part for Frigidaire refrigerators. It is a metal component located on each side of wire shelf tracks that work together to make shelf and drawer movements smooth. 

Causes of bad glide gears can include wear from years of extended usage, dents or deformation that restrict proper motion, or failure of lubricating parts inside the gear mechanism.

Symptoms of a bad Drawer Glide Gear include:

• Shelves or drawers that stick or fail to slide freely
• Noisy squeaking or grinding noises coming from shelf areas  
• Shelves difficult to properly align or position as needed

As a high-stress moving part, glide gears can degrade and lead to slothful storage access over time. Replace with this genuine OEM component for optimally smooth shelf performance on your Frigidaire refrigerator. The replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Glide is an OEM part for Frigidaire ranges. It ensures smooth movement of the storage drawer, allowing you to easily access and organize your stored items.

A bad glide can be caused by wear and tear, damage, or lack of lubrication. Signs of a faulty glide include a sticky or jammed drawer, uneven sliding, or a drawer that doesn't close properly.

Symptoms of a bad glide can include:

• Difficulty in opening or closing the storage drawer.
• Uneven or jerky sliding motion of the drawer.
• Drawer getting stuck or not fully closing.

Replace your worn-out or damaged glide with this genuine OEM part to restore movement to your range's storage drawer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.