Frigidaire Refrigerator Drawer, Shelf, Pan

This support is the structural piece that holds and aligns a shelf, rack, or panel within your appliance. Replacing a worn or broken support restores proper fit and stability to prevent wobble, sagging, and related damage. What it does:

• Provides stable mounting and positioning for the associated shelf, rack, or component
• Helps maintain alignment so parts sit or slide correctly
• Replace if cracked, deformed, loose, or missing
• Symptoms can include a component that sits unevenly, drops, or won't stay in place

• Includes 1 support

• Disconnect power to the appliance before servicing
• Allow any hot surfaces to cool; wear cut-resistant gloves
• Note the orientation of the original part; reuse existing fasteners if applicable
• Ensure the support is fully seated and secure before returning the appliance to use

The Drawer Glide Gear is an OEM replacement part for Frigidaire refrigerators. It is a metal component located on each side of wire shelf tracks that work together to make shelf and drawer movements smooth. 

Causes of bad glide gears can include wear from years of extended usage, dents or deformation that restrict proper motion, or failure of lubricating parts inside the gear mechanism.

Symptoms of a bad Drawer Glide Gear include:

• Shelves or drawers that stick or fail to slide freely
• Noisy squeaking or grinding noises coming from shelf areas  
• Shelves difficult to properly align or position as needed

As a high-stress moving part, glide gears can degrade and lead to slothful storage access over time. Replace with this genuine OEM component for optimally smooth shelf performance on your Frigidaire refrigerator. The replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement crisper pan sits beneath the refrigerator crisper drawer to catch spills and support stored produce, helping keep the drawer area clean and stable. Fits as the OEM service part for compatible Frigidaire units. What it does:

• Supports the crisper drawer and helps keep fruits and vegetables stable.
• Collects spills and juices to prevent them from dripping into the cabinet below.
• Restores proper drawer seating when a cracked or warped pan prevents full engagement.
• Helps maintain a cleaner, more sanitary drawer area.

• Remove stored food and slide the crisper drawer out to access the pan.
• Lift or unclip the old pan per your refrigerator's service instructions and slide the replacement into the same position.
• Handle carefully and inspect mating rails and seals; replace any damaged hardware before reassembly.
• No special tools required for most models; wear gloves if removing a cracked pan.

Removable silverware basket for the dishwasher lower rack that keeps forks, knives and spoons separated and upright during wash cycles, helping prevent items from shifting, nesting, or blocking spray for better cleaning results. What it does:

• Holds cutlery and small utensils securely to improve wash coverage and reduce nesting.
• Keeps sharp items contained to help protect dishes and reduce movement during cycles.
• Replaces cracked, broken, or missing baskets that allow silverware to fall through the rack.
• Easy to clean—simply rinse or place in the dishwasher top rack if needed.

• Typically installs without tools: slide out the lower rack and set the basket into the designated rack area.
• Ensure the basket is oriented correctly and does not obstruct rack travel or spray arms before running a cycle.
• Inspect surrounding rack tines and clips for damage while replacing the basket.
• Refer to the appliance owner's manual or service guide for model-specific instructions and safety information.

This replacement door bin restores a refrigerator door's interior storage for bottles, jars and small items. It provides a secure, easy-to-clean shelf that helps keep contents organized and accessible. What it does:

• Replaces a cracked, broken or worn refrigerator door storage bin
• Holds bottles, condiments and small containers securely on the door
• Restores proper fit and prevents items from falling during normal use
• Clear plastic lets you see contents at a glance

• One door bin

• Removes and installs by snapping into existing door-mounted support rails; no tools typically required
• Handle parts gently to avoid cracking; plastic can be brittle if cold
• Clean with mild soap and water; avoid abrasive cleaners or high-heat drying
• If the bin does not seat fully, check door support rails are undamaged before forcing

The Crisper Pan is an OEM part for Frigidaire bottom-mount refrigerators. Located in the crisper drawer, this removable pan collects moisture to prevent vegetables from becoming dry or wilted. Its inset design allows for organized storage of fruits and veggies.

Causes of failure can be cracks or breaks from weight of stacked items. Normal wear over time may also compromise the seal. 

Symptoms of a faulty crisper pan include:

• Excess moisture collecting in the bottom of the crisper drawer  
• Produce drying out or wilting more quickly
• Ill-fitting or loose crisper pan that slides around 

This OEM pan is also compatible with Electrolux, KitchenAid, and select Kenmore models.

This right-hand support is a small interior bracket used in select refrigerators to secure and stabilize the matching component on the right side. Replacing a cracked or missing support helps keep shelves and covers level and in place.

• Provides right-side support and alignment for the associated interior component
• Helps keep shelves/covers stable; prevents wobble, sagging, or unexpected drop
• Common signs of failure: broken tabs, cracked plastic, loose fit, or a missing support
• Replace if damaged from impact, overloading, or age

• Unplug the refrigerator and remove items to access the area
• Remove the related shelf/cover and retain any screws or clips
• Transfer and reuse the original mounting hardware if required
• Align the new support in the same orientation; secure firmly and confirm level before reassembly

This refrigerator shelf assembly provides a stable, easy-to-clean storage surface for food and containers, restoring usable shelving space and organization inside your fridge. What it does:

• Replaces a cracked, chipped or missing shelf to prevent items from tipping or falling
• Restores a level, sturdy surface for storing plates, bowls and food containers
• Helps contain minor spills on a single, removable surface for easier cleanup
• Fits into existing shelf rails to maintain proper interior layout and airflow

• Remove food from shelf area and store items safely before removing the old shelf
• Slide the shelf into the existing rails until it seats; some shelves may lift slightly to engage
• Use gloves to protect hands when handling glass or sharp edges
• If shelf does not seat smoothly, inspect rails and mounting clips for damage before forcing

This replacement door bin assembly restores secure, organized storage on your refrigerator or freezer door so bottles, jars, and condiments stay in place and easy to reach. What it does:

• Attaches to the door to hold and organize items
• Replaces a cracked, warped, or missing bin to restore capacity
• Helps keep contents upright during door opening/closing
• Common symptoms: broken tabs, bin won't seat, falls off, or visible damage

• 1 door bin assembly

• Empty the bin and remove the old one by lifting up and out
• Align the new bin's tabs/hooks with the door slots, then press down until it locks
• Handle plastic carefully; do not force into place
• Do not overload the bin; distribute weight evenly

This refrigerator door bin mounts on the inner door to hold bottles and condiments securely. Replace a cracked or missing bin to restore storage capacity and keep items from tipping or falling when you open the door.

• Provides on-door storage for bottles, jars, and small items
• Attaches to molded tabs on the door liner to stay in place
• Common symptoms: cracked or broken plastic, bin falls off or won't seat, missing bin
• Restores original door storage capacity and organization

• Remove contents and lift the old bin straight up and out of the door liner slots
• Align the new bin in the same location; hook rear edges first, then press down until fully seated
• If plastic is cold, let it warm to room temperature before installation to reduce the chance of cracking
• Verify placement matches your model's diagram; do not force or overload

This upper freezer door bin replaces the molded storage bin that holds small frozen items on the freezer door, restoring secure storage and organization. Durable plastic construction matches the original fit and mounting points. What it does:

• Replaces cracked, broken, or missing upper freezer door storage bin
• Restores proper storage so items no longer fall out when opening the door
• Provides the molded pocket for cans, frozen foods, and small containers
• Matches original mounting locations for a stable fit

• Remove all items from the door and open the freezer door fully before installing
• Align the bin with the door tracks or mounting tabs and press until it snaps into place
• Handle carefully to avoid sharp edges and wear gloves if necessary

The Pan Cover Glass Insert is an OEM part for Frigidaire refrigerators. It acts as the shelf above the crisper drawers, providing a stable and transparent surface for storing fruits, vegetables, and other perishables. This glass insert is crucial for maintaining the organization within the fridge, allowing for easy visibility and access to items stored in the crisper drawers beneath it. 

Causes of damage to the Pan Cover Glass Insert can include overloading it with too heavy items, accidental impacts during the loading or unloading of groceries, or sudden temperature changes that can cause glass to weaken or crack.

Symptoms indicating the need for a replacement include:

• Visible cracks or chips in the glass
• Scratches that impair visibility
• Shattering of the glass insert

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.