Frigidaire Refrigerator Drawer, Shelf, Pan

For left hand support. Color: white. Measures about 2 inches high by 2 inches deep. For right hand support use part number 5303325990

The Glide is an OEM part for Frigidaire ranges. It ensures smooth movement of the storage drawer, allowing you to easily access and organize your stored items.

A bad glide can be caused by wear and tear, damage, or lack of lubrication. Signs of a faulty glide include a sticky or jammed drawer, uneven sliding, or a drawer that doesn't close properly.

Symptoms of a bad glide can include:

• Difficulty in opening or closing the storage drawer.
• Uneven or jerky sliding motion of the drawer.
• Drawer getting stuck or not fully closing.

Replace your worn-out or damaged glide with this genuine OEM part to restore movement to your range's storage drawer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This support is the structural piece that holds and aligns a shelf, rack, or panel within your appliance. Replacing a worn or broken support restores proper fit and stability to prevent wobble, sagging, and related damage. What it does:

• Provides stable mounting and positioning for the associated shelf, rack, or component
• Helps maintain alignment so parts sit or slide correctly
• Replace if cracked, deformed, loose, or missing
• Symptoms can include a component that sits unevenly, drops, or won't stay in place

• Includes 1 support

• Disconnect power to the appliance before servicing
• Allow any hot surfaces to cool; wear cut-resistant gloves
• Note the orientation of the original part; reuse existing fasteners if applicable
• Ensure the support is fully seated and secure before returning the appliance to use

The Drawer Glide Gear is an OEM replacement part for Frigidaire refrigerators. It is a metal component located on each side of wire shelf tracks that work together to make shelf and drawer movements smooth. 

Causes of bad glide gears can include wear from years of extended usage, dents or deformation that restrict proper motion, or failure of lubricating parts inside the gear mechanism.

Symptoms of a bad Drawer Glide Gear include:

• Shelves or drawers that stick or fail to slide freely
• Noisy squeaking or grinding noises coming from shelf areas  
• Shelves difficult to properly align or position as needed

As a high-stress moving part, glide gears can degrade and lead to slothful storage access over time. Replace with this genuine OEM component for optimally smooth shelf performance on your Frigidaire refrigerator. The replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement crisper pan sits beneath the refrigerator crisper drawer to catch spills and support stored produce, helping keep the drawer area clean and stable. Fits as the OEM service part for compatible Frigidaire units. What it does:

• Supports the crisper drawer and helps keep fruits and vegetables stable.
• Collects spills and juices to prevent them from dripping into the cabinet below.
• Restores proper drawer seating when a cracked or warped pan prevents full engagement.
• Helps maintain a cleaner, more sanitary drawer area.

• Remove stored food and slide the crisper drawer out to access the pan.
• Lift or unclip the old pan per your refrigerator's service instructions and slide the replacement into the same position.
• Handle carefully and inspect mating rails and seals; replace any damaged hardware before reassembly.
• No special tools required for most models; wear gloves if removing a cracked pan.

Removable silverware basket for the dishwasher lower rack that keeps forks, knives and spoons separated and upright during wash cycles, helping prevent items from shifting, nesting, or blocking spray for better cleaning results. What it does:

• Holds cutlery and small utensils securely to improve wash coverage and reduce nesting.
• Keeps sharp items contained to help protect dishes and reduce movement during cycles.
• Replaces cracked, broken, or missing baskets that allow silverware to fall through the rack.
• Easy to clean—simply rinse or place in the dishwasher top rack if needed.

• Typically installs without tools: slide out the lower rack and set the basket into the designated rack area.
• Ensure the basket is oriented correctly and does not obstruct rack travel or spray arms before running a cycle.
• Inspect surrounding rack tines and clips for damage while replacing the basket.
• Refer to the appliance owner's manual or service guide for model-specific instructions and safety information.

Color: white. Measures about 2 inches high by 2 inches deep.

This door support bracket replaces a worn or damaged support that helps hold and align the appliance door. Restores proper door fit and reduces sagging so the door seals and operates more reliably. What it does:

• Provides stable support for the appliance door to prevent sagging and misalignment
• Helps maintain proper door gap so the door closes and seals correctly
• Replaces broken, bent, or worn support brackets that can cause uneven operation
• Reduces rattling or extra movement caused by a compromised support

• Disconnect power to the appliance before beginning any repair
• Basic hand tools are typically required; follow manufacturer instructions for access and removal
• Handle sharp edges carefully and support the door during removal/installation to avoid damage or injury

This is a right-side tilt-out end cap that replaces a damaged or missing end piece on a refrigerator/freezer tilt-out bin. Restores secure mounting and proper pivoting of the bin for smooth opening and closing. What it does:

• Serves as the right end support for a tilt-out bin, providing the pivot point and cosmetic trim
• Keeps the bin aligned so it opens and closes smoothly
• Replaces cracked, broken, or worn end caps that allow the bin to sag or fall out
• Helps prevent rattling and excessive play of the tilt-out bin

• One right-side tilt-out end cap

• High-level snap-in or screw-mount replacement; remove the bin and follow OEM instructions
• Remove stored items before servicing and support the bin while replacing the cap
• Use basic hand tools; avoid forcing parts to prevent further damage

Color: White. Right hand side

Color: White. Left hand side

The Crisper Pan is an OEM part for Frigidaire bottom-mount refrigerators. Located in the crisper drawer, this removable pan collects moisture to prevent vegetables from becoming dry or wilted. Its inset design allows for organized storage of fruits and veggies.

Causes of failure can be cracks or breaks from weight of stacked items. Normal wear over time may also compromise the seal. 

Symptoms of a faulty crisper pan include:

• Excess moisture collecting in the bottom of the crisper drawer  
• Produce drying out or wilting more quickly
• Ill-fitting or loose crisper pan that slides around 

This OEM pan is also compatible with Electrolux, KitchenAid, and select Kenmore models.

This right-hand support is a small interior bracket used in select refrigerators to secure and stabilize the matching component on the right side. Replacing a cracked or missing support helps keep shelves and covers level and in place.

• Provides right-side support and alignment for the associated interior component
• Helps keep shelves/covers stable; prevents wobble, sagging, or unexpected drop
• Common signs of failure: broken tabs, cracked plastic, loose fit, or a missing support
• Replace if damaged from impact, overloading, or age

• Unplug the refrigerator and remove items to access the area
• Remove the related shelf/cover and retain any screws or clips
• Transfer and reuse the original mounting hardware if required
• Align the new support in the same orientation; secure firmly and confirm level before reassembly