Frigidaire Refrigerator Drawer, Shelf, Pan

Replacement shelf support for refrigerators. Secures and stabilizes shelves to hold stored items. Replace if cracked, broken, or worn from impacts or overloading.

Side rail that supports and guides your refrigerator's sliding freezer basket. Replace this hanger if cracked, broken, or worn to restore smooth sliding.

This replacement door bin mounts on the inside of your refrigerator door to hold bottles, jars, and condiments. Replacing a cracked or loose bin restores safe, usable storage and helps keep items organized and accessible.

• Provides storage on the door to keep bottles and jars upright
• Restores capacity when the original bin is cracked, warped, or missing
• Helps prevent items from tipping or falling when the door opens/closes
• Common symptoms: bin falls off, won't stay seated, or has broken tabs/cracks

What's included: 1 door bin Install notes:

• Remove all items from the old bin; lift straight up to release from the door slots
• Align the new bin's tabs with the slots and press down until fully seated
• Do not force; re-align if resistance is felt to avoid damaging the door liner
• Place in the correct door position for your model; some bins aren't interchangeable between levels

Guide rail that supports and directs refrigerator drawers along their track. Replace when original is worn, cracked, or broken to restore smooth sliding.

Replace worn or broken freezer drawer slide rails. Restores smooth gliding and proper alignment. Includes left and right side guides for bottom-mount units.

This replacement crisper pan sits beneath the refrigerator crisper drawer to catch spills and support stored produce, helping keep the drawer area clean and stable. Fits as the OEM service part for compatible Frigidaire units. What it does:

• Supports the crisper drawer and helps keep fruits and vegetables stable.
• Collects spills and juices to prevent them from dripping into the cabinet below.
• Restores proper drawer seating when a cracked or warped pan prevents full engagement.
• Helps maintain a cleaner, more sanitary drawer area.

• Remove stored food and slide the crisper drawer out to access the pan.
• Lift or unclip the old pan per your refrigerator's service instructions and slide the replacement into the same position.
• Handle carefully and inspect mating rails and seals; replace any damaged hardware before reassembly.
• No special tools required for most models; wear gloves if removing a cracked pan.

Mounts freezer baskets to the interior freezer wall for organized storage. Replace if cracked, broken, or missing to restore proper basket support.

Structural support that holds and aligns shelves or racks in your side-by-side refrigerator. Replace when worn, broken, or missing to restore stability.

Replacement drawer slide for freezers. Restores smooth gliding when original is broken, worn, or causes sticking. Essential for proper drawer alignment.

The Drawer Glide Gear is an OEM replacement part for Frigidaire refrigerators. It is a metal component located on each side of wire shelf tracks that work together to make shelf and drawer movements smooth. 

Causes of bad glide gears can include wear from years of extended usage, dents or deformation that restrict proper motion, or failure of lubricating parts inside the gear mechanism.

Symptoms of a bad Drawer Glide Gear include:

• Shelves or drawers that stick or fail to slide freely
• Noisy squeaking or grinding noises coming from shelf areas  
• Shelves difficult to properly align or position as needed

As a high-stress moving part, glide gears can degrade and lead to slothful storage access over time. Replace with this genuine OEM component for optimally smooth shelf performance on your Frigidaire refrigerator. The replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This slide set replaces the right- and left-hand rails that guide and support a drawer or rack. It restores smooth, aligned movement so the assembly opens and closes easily without sticking, wobbling, or jumping off the track.

• Guides and stabilizes the drawer/rack on both sides for smooth travel
• Maintains alignment to reduce binding, uneven movement, and premature wear
• Replaces worn, bent, or broken slides that affect operation
• Common symptoms: sticking, rough/grinding movement, tilt or sag, popping off track, hard to open/close

• Disconnect power; shut off gas/water. Remove the drawer or rack before servicing.
• Note L/R orientation; remove old slides and reuse existing screws/brackets.
• Install new slides in the same positions; ensure they are fully seated and aligned.
• Test movement several times before returning the appliance to service; wear cut-resistant gloves.

Replacement slide rail that mounts inside the freezer to support and guide storage baskets. Replace if cracked, broken, or worn to restore smooth gliding.

The Glide is an OEM part for Frigidaire ranges. It ensures smooth movement of the storage drawer, allowing you to easily access and organize your stored items.

A bad glide can be caused by wear and tear, damage, or lack of lubrication. Signs of a faulty glide include a sticky or jammed drawer, uneven sliding, or a drawer that doesn't close properly.

Symptoms of a bad glide can include:

• Difficulty in opening or closing the storage drawer.
• Uneven or jerky sliding motion of the drawer.
• Drawer getting stuck or not fully closing.

Replace your worn-out or damaged glide with this genuine OEM part to restore movement to your range's storage drawer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This is a sliding storage basket with trim that fits inside a freezer drawer to organize and separate frozen items. It slides along rails within the freezer compartment for easy access to stored food. Replace this basket if it is cracked, broken, or if the sliding mechanism no longer moves smoothly.

Replacement hanger bracket for refrigerator meat pan drawers. Mounts to side wall with screws. Order when original hanger is cracked, broken, or missing.

Mounting bracket that secures freezer shelves and internal panels. Replace if cracked, bent, or broken to restore proper alignment and stability.