Need Help?
Call or text
Burner not heating? This 6-inch surface element fits GE and Hotpoint ranges with looped terminals. Simple plug-in replacement takes 10 minutes.
My 1984 GE Electric Stove model number was very close to an another entry, but not actually in appliance repair pros' model numbers list. But my burners looked and measured the same for the near entry number, and the surface unit control switch looked very similar. I decided to take a chance and ordered 2 of each.. (Actually I wouldn't have needed new burners but an earlier "repair guy" took 2 of my burners and never returned - and no one could find him!) It turned out the new burners fit... Read more
Burner won't heat or heats unevenly? This 8-inch radiant surface element restores even heating to your smooth-top cooktop. Moderate DIY repair.
Replaced. Read more
Burner not heating or heating unevenly? This 8-inch plug-in coil element restores consistent heat to your range cooktop. Simple 5-minute replacement.
The burners and drip pans that I previously ordered fit this stove perfectly. It is so much better cooking on the cook stove with the burners laying properly. I'm very pleased. My only complaint is that I wish more parts were available for this old stove, I really love it! Read more
Burner element burned out and quit working? This dual radiant surface element restores fast, even heating beneath glass cooktops. 10-15 minute repair.
I broke two of the elements in my GE Profile cooktop because I failed miserably at removing the glass top. It pays to do your research, kiddies. All it takes is a Number 10 Torx bit to remove 12 screws holding the glass to the body of the appliance, and it lifts straight up. I was replacing the glass because it broke during my home's construction. Anyway, you need a 1/4" nut driver to remove the mounting tabs on the bottom of the old element and transfer them to the new one. The whole swap out... Read more
6-inch burner won't heat? This surface element coil restores steady heat for boiling and simmering. DIY-friendly replacement takes about 5-15 minutes.
Just took out old elements and then old pans. Replaced all 4 pans followed by 4 elements. Had to adjust element leads to get a secure level fit. Looked like a new range top when completed. The job was completed in less than 15 minutes. Read more
Burner won't heat or heats unevenly? This 12-inch radiant element restores full heating power to smooth-top electric cooktops. Moderate DIY repair.
This 9-inch dual radiant surface element kit replaces a failed burner on a smooth-top electric range or cooktop, restoring dependable, even heating and letting you choose a smaller or larger heating area to match your cookware.
I wasn't sure of the problem, but after reading a lot on appliancepartspros.com on my model and symptoms, I narrowed it down to the dual burner selector switch or the Dual element. I didn't have a lot of time to take everything apart to diagnose it, so I ordered both items. The parts came quickly and was competitively priced (Amazon was slightly cheaper, but didn't offer the same return policy). As a typical man, I didn't read the instructions, because I have an electronics and computer... Read more
Fix a cooktop burner heating only on inner or outer ring, or not heating at all. This dual radiant element restores both heating zones. DIY repair.
I replaced the burner. The cook top had an exhaust fan attached which made the repair much harder. I know now you can remove the exhaust fan and duct from the bottom which would have saved me a lot of time. Read more
Replace a dual radiant element that won't heat, heats unevenly, or stays on when turned off. Compatible with many glass cooktops. Video guide included.
I have a GE range model number 164D3871P001. The part number WB30T10046 did not match the GE model range. I looked at the original part and it looks identical to the WB30T10046. I had it installed and it is working like new. Read more
Bridge element not heating evenly or failing to connect? This cooktop bridge heating element restores even heat across two burners for large cookware. 1-2 hour install.
Burner not heating or won't turn on? This 12-inch halogen element restores radiant heat to your cooktop. Common DIY repair with basic tools in 30 minutes.
Ordered a new one from Appliance Parts Pros. Read more
If your glass cooktop burner won't heat or is visibly damaged, this 9 inch dual radiant element restores cooking performance. DIY repair in 15-30 minutes.
Removed stove from counter top. Removed glass top of stove to get to burners. Not easy. Read more
Burner won't heat or heats unevenly? This radiant surface element restores proper cooking temperature. Moderate DIY repair in 20-30 minutes.
Burner won't heat or heats unevenly? This rear heating element restores proper cooking temperature. Moderate DIY repair with basic tools in 30-45 minutes.
Broken element not heating? This radiant bridge connector restores electrical contact between your cooktop element and wiring. Takes 10-15 minutes to install.
Usually ships within 4 - 14 days