General Electric Range / Cooktop / Oven Control Board

Please note per GE: Jumper Wire For Phase 2&3 Of Self Clean Must Be Made By Tech In Field "y" Wire. Note:may Have Allign/problem With Holes On Glass,reported(1-18-00) Call On Qualified Technician For Instruction

This main control board is the oven's primary electronic controller, managing user controls, display, and heating cycles to restore reliable oven operation. Installing the correct board returns control to the appliance's interface and functions. What it does

• Receives input from the control panel and sends commands to heating elements, igniters, timers and displays
• Re-establishes responsive touchpads/keys and digital readouts when original board fails
• Common symptom: unresponsive or blank control display, oven not starting or not heating properly
• Resolve intermittent errors, false fault codes, or oven cycle failures linked to failed control electronics

• One main control (logic) board assembly

• Disconnect power at the breaker or unplug the appliance before starting — this part is behind live wiring
• Handle the board carefully; avoid static discharge and physical damage to connectors or solder joints
• Basic installation typically requires removing the console or back panel and transferring wiring harnesses and mounting hardware

The Encoder Assembly is an OEM part for GE gas ranges. It digitally converts analog knob movements into signals to control the gas valve, igniter, and temperature settings. 

Causes of a bad encoder assembly include degradation of internal sensors and switches over time, loose wiring connections, or impacts that cause misalignment.

Symptoms of a bad encoder assembly are:

• Delays or errors when trying to light burners
• Inaccurate flame height and temperature level responses 
• Knobs feel sticky, sluggish or jump between settings
• Error codes indicating control module communication issues

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore gas range models.

This electronic range control (ERC) is the oven's main user interface and control board, restoring clock, timer and bake/broil cycle control so the oven responds to user commands and timed functions. What it does:

• Controls oven bake, broil and timed cooking functions via the front keypad and display
• Manages the clock, timers and control-panel display behavior
• Enables the oven to accept user inputs and send commands to heating elements/relays
• Commonly replaced when the display is blank, touchpad won't respond, or oven won't start/maintain selected cycles

• One electronic range control (ERC) module

• Disconnect all power to the appliance before starting — risk of electric shock
• Handle control and any attached display/clock assembly carefully to avoid damage
• Some installations require transferring the keypad/display or mounting brackets from the old unit

This electronic oven control replaces the failed range control to restore timed baking, broiling and oven temperature regulation. It connects to the control harness and manages oven functions through the user interface. What it does:

• Controls oven heating cycles, bake and broil functions, and temperature regulation
• Manages oven timing and display readouts for set cook times and delays
• Replaces a non-responsive or erratic control board causing incorrect temperatures or unresponsive controls
• Works with the oven's control harness and user interface to send power to heating elements

• Disconnect power to the appliance at the breaker before servicing
• Handle the control by the edges and avoid touching circuitry; use anti-static precautions if available
• Verify connector orientation and seat all harnesses fully during reassembly

This relay board assembly is the control relay module that routes power to a refrigerator's major components. Replacing a faulty relay board restores reliable starting and power distribution for cooling and related functions. What it does

• Directs electrical power to the compressor and other major components via relays
• Replaces a failed relay board that can cause a refrigerator not to start or run intermittently
• Can stop symptoms like repeated relay clicking, no cooling, or a compressor that won't engage
• Works as the electrical switching interface between the main control and high-current components

• One relay board assembly

• Disconnect power before servicing to avoid electrical shock
• Handle the board by the edges and avoid touching contacts or components
• Verify connectors are fully seated and routed away from moving parts before restoring power

This electronic range control replaces the oven's main control board to manage bake/ broil cycles, the clock/timer and front-panel functions for safe, reliable cooking operation. Restores electronic control of oven features when faulty. What it does:

• Regulates oven heating cycles and temperature control signals to the bake and broil elements
• Powers and displays the clock/timer and user interface information
• Processes keypad commands; a failed ERC can cause an unresponsive control panel
• Commonly linked to symptoms such as no display, erratic or no heating, or oven not starting

• One electronic range control board

• Disconnect all power to the appliance before attempting service to avoid shock or injury
• Handle the circuit board carefully to avoid static damage; reuse original mounting hardware unless replacements are provided
• After installation, test all oven functions and calibrate per the manufacturer's instructions if required

The Oven Control Board is an OEM part for GE ranges. As the central processor, it controls all cooking operations and digital interface functions.

Causes of needing replacement include moisture exposure deteriorating circuitry over time, power abnormalities damaging sensitive chips, or continuous daily cooking cycles promoting natural wear.

Symptoms requiring attention are:

• Fault codes appearing and knobs/buttons unresponsive
• Inaccurate temperature calibration or modes stuck on/off
• Clean and Convection options permanently disabled
• Bake element or broiler functioning erratically

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Oven Control Board is an OEM part for GE ranges. It is an important electronic component that is responsible for monitoring and regulating all oven functions including bake, broil, convection, temperature probes, preheat indicator lights, clock, and timers.

Symptoms of a bad oven control board include:

• Oven failing to heat or cook food properly
• Inaccurate or fluctuating temperature readings
• Control locks or buttons not working as expected
• Timers or clocks not keeping time
• Pre-heat light not illuminating

Causes of failure can include water damage, circuitry issues, component degradation over time, or surges that disrupt electrical signals.

This OEM GE replacement board ensures consistent and reliable oven operation. It restores full functionality to critical baking and cooking systems. This part is also compatible with Hotpoint, RCA, and select Kenmore range models.

The Reed Switch Pcb is an OEM part for GE gas ranges. This component plays a crucial role in the burner control system by detecting the on/off position of the control knobs. 

Causes of a bad reed switch pcb include circuitry failure, component degradation over time, damage from falls or impacts, or issues with the wiring connections. 

Symptoms of a bad reed switch pcb include:

• Burners not igniting when turned on  
• Ignition sparks but burners fail to light
• Unresponsive or intermittent control knob functionality
• Inability to turn burners off

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This LED power supply powers and regulates the refrigerator's LED lighting, restoring reliable interior illumination. It replaces a failed driver to stop flicker and prevent LEDs from remaining dark or dim. What it does:

• Converts appliance line voltage to the proper low-voltage DC for LED strips
• Keeps LED lights stable and prevents flickering or intermittent operation
• Restores full brightness when a failed driver causes dim or no interior lighting
• Protects LEDs from irregular voltage that can shorten lamp life

• Disconnect power to the appliance before starting any work to avoid shock.
• Handle the board and connectors carefully to avoid static or physical damage.
• Basic hand tools and access to the light housing/panel are usually required.

The Control Oven (ERC3DD) is an OEM replacement part for GE ranges. As the central electronic control board, it facilitates operation of all oven features through buttons on the control panel.

Symptoms of a bad control can include:

• Buttons or displays not functioning properly
• Inability to select bake, broil or other cooking options  
• Door lock malfunctioning 
• Temperature not reaching desired set point
• Control panel not responding to input

Causes may relate to component failures over time or damage from water, voltage fluctuations, or other electrical issues. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

A replacement frame board assembly that secures the oven/range control console and gives the control area a finished appearance. Restores proper mounting and protection for the control electronics so buttons and displays sit correctly. What it does

• Provides the structural frame and mounting surface for the range/oven control console and control board.
• Protects control electronics and wiring from exposure and interference.
• Keeps front control buttons, switches and displays aligned and stable.
• Restores the unit's finished appearance when the original frame is cracked, bent or broken.

• Disconnect power to the appliance before starting work to prevent shock or damage.
• Handle sharp sheet-metal edges carefully and keep small fasteners organized for reassembly.
• Some disassembly of the backguard or control console may be required to access mounting screws.

This lower oven relay board switches power to the lower oven heating elements so the bake and broil functions get the proper voltage. Replacing a failed relay restores reliable lower-oven heating and control. What it does:

• Routes power from the oven control to the lower oven heating element when bake or broil is selected
• Commonly used when the lower oven will not heat, heats intermittently, or control clicks but no heat
• Prevents overheating by providing timed switching as directed by the oven control
• Works as the relay interface between the range's main control and the lower oven element

• Disconnect power to the appliance before beginning any service to avoid electric shock
• Access typically requires removing the back panel or console to reach the oven control/relay assembly
• Handle the board carefully to avoid static damage; do not touch exposed components