General Electric Range / Cooktop / Oven Control Board

This electronic oven control (ERC3DD) replaces the range/oven user interface board to restore oven functions and display control. It manages wall clock, bake and broil cycles, timers and keypad commands so the oven responds correctly. What it does:

• Controls oven heating cycles and timing functions for bake, broil and timed operations
• Interprets keypad input and updates the front display/clock
• Enables oven temperature regulation and cycle sequencing
• Common symptom: oven won't heat or complete cycles, display is blank or shows error codes
• Common symptom: touchpad buttons are unresponsive or commands are ignored

• One electronic oven control board (ERC3DD)

• Disconnect power at the breaker or unplug the appliance before starting any repair
• Handle the control board by its edges and avoid static discharge; use ESD protection if available
• Verify cabinet and panel fitment matches your oven before final installation

This right-side generator board is the replacement control board that completes the unit's ignition/control circuit, restoring proper operation and reliable starts. Use it to replace a damaged or non-responsive right-side generator board. What it does:

• Routes ignition/control signals to the right-side components and helps enable proper spark or control functions
• Common symptom: no ignition or intermittent starting on the right side
• Common symptom: erratic or no response from the affected side's controls
• Helps restore normal operation when the original board is cracked, burnt, or electrically damaged

• Disconnect power (and gas, if applicable) before starting any repair
• Handle the board by the edges and avoid static discharge; use ESD precautions if available
• Inspect connectors and wiring for heat or corrosion; replace damaged wiring or connectors

This electronic oven control manages the oven's clock, timer and user interface so you can set bake/broil cycles and monitor time. Replaces a worn or non-responsive control to restore normal oven control and timing. What it does

• Displays and keeps the oven clock and kitchen timer.
• Accepts user settings for bake, broil, delay start and timed cook functions.
• Relays control commands to the oven's temperature and heating systems.
• Common symptom: blank or unresponsive display, unresponsive keypad, or loss of timer/clock functions.
• Common symptom: oven won't start timed or delayed cooking cycles when the control fails.

• Disconnect power to the appliance before starting any repair to avoid electric shock.
• Handle the control board and display carefully to avoid damage from static or impact.
• Verify panel and connector orientation before removing the old control to prevent wiring errors.

This control display module is the oven/range user interface that shows status and accepts touchpad or button commands, restoring visible controls and responsive operation for affected units. What it does:

• Displays oven settings, clock, temperatures and error codes so you can monitor cycles
• Receives keypad or touch inputs to set bake, broil, timers and other functions
• Helps the range respond when buttons are unresponsive or the screen is blank
• Can resolve intermittent control behavior or incorrect readouts related to the console

• One control display module (user interface) as shown

• Disconnect power at the breaker or unplug the appliance before starting
• Handle the glass and ribbon/pin connectors carefully to avoid damage
• Remove the console or trim to access the module; keep fasteners and grounding intact
• Verify the part number on your existing module before ordering and test operation after reconnecting power

This oven control is the electronic control board that manages bake, broil, timer and user interface functions so your range responds correctly to temperature and command inputs. Replaces a failed or unresponsive control assembly to restore normal oven operation. What it does:

• Regulates oven heating cycles and user-entered temperatures via the control board
• Controls bake, broil, timer and display functions on the oven console
• Can resolve symptoms like unresponsive touchpad, blank/erratic display, or failure to start bake/broil cycles
• Works as the main interface between user commands and oven heating components

• 1 oven control electronic control board assembly

• High-level replacement; disconnect power at the breaker before servicing
• Handle board and connectors carefully to avoid static or connector damage
• Retain all mounting hardware and connectors; reference your model's service manual for exact panel removal steps

This electronic control board (Quantum) manages oven range functions and user interface features so the appliance responds correctly to cook settings and timers. It restores control panel operation and the appliance's electronic command processing. What it does:

• Serves as the main interface and logic controller for oven/range functions, including bake/broil and timer/clock control
• Processes user commands from the touchpad or selector and sends signals to heating elements, relays, and sensors
• Can fix symptoms such as no display or unresponsive control panel, oven not starting, or erratic cycle behavior
• Works with the oven's sensor and power components to regulate cooking operations

• 1 electronic control board (Quantum) as pictured

• Disconnect power to the appliance before beginning any service to avoid shock or damage
• Handle the board by the edges and avoid static discharge; use proper ESD precautions
• Verify connectors and wiring match before connecting and secure all harnesses firmly
• After installation, restore power and confirm all functions and displays operate correctly

This relay board assembly switches household power to heating elements and other high-current circuits, restoring proper operation to ranges and ovens that fail to energize components. It replaces a failed relay module to help appliances heat reliably. What it does:

• Acts as the high-current switching relay for oven/range heating circuits
• Routes power to elements/igniters when the control tells it to
• Commonly linked to symptoms like no heat, intermittent heating, or clicking from the control area
• Replaces a failed relay to stop arcing or loss of power to heating components

• Disconnect power at the breaker or unplug the appliance before servicing
• Verify the part number and connector orientation before removing the old board
• Handle the board carefully to avoid bending pins or damaging terminals

This electronic range control (ERC3HP) regulates oven functions like bake, broil and timed cooking so your range responds correctly to temperature and timer settings. Fits as the direct replacement control board for affected oven models. What it does:

• Manages oven user interface commands and internal relay switching for bake, broil and convection cycles
• Controls oven temperature regulation and displays time/clock functions
• Enables timed bake, delay start and other programmed cooking features
• Can resolve symptoms such as non-heating bake/broil cycles, unresponsive front controls, or erratic temperature behavior

• Disconnect power at the breaker before accessing internal components to avoid shock
• Handle the control board by its edges; avoid touching circuitry or connector pins
• Verify connector orientation and secure all wire harnesses before restoring power

This generator board supplies the ignition pulse and switching signals for the right/left burner igniters so the range's gas burners light reliably. It replaces a failed ignition control to restore normal spark operation. What it does:

• Generates high-voltage pulses to the right and left burner igniters for ignition
• Routes timing and switching signals between the range's control system and igniters
• Helps stop continuous clicking or lack of spark at the burners
• Addresses symptoms such as no ignition, intermittent sparking, or constant clicking during start-up

• Disconnect power to the appliance and shut off the gas supply before servicing
• Handle the board carefully to avoid static damage; use proper ESD precautions
• Reuse factory mounting hardware and wiring harnesses unless visibly damaged

This replacement 27" oven timer controls the oven clock, timer and clean functions so your range can accurately time cooking cycles and complete self-clean cycles. Restores timed baking, countdown and oven clean control. What it does:

• Replaces the oven's timer/clock control used for setting cook time and monitoring countdowns
• Manages self-clean cycle initiation and timing for compatible 27" ovens
• Restores visible clock and timer display when original control is blank or unresponsive
• Helps address symptoms like oven not starting timed cycles, timer not counting down, or clean cycle failing to initiate

• Disconnect power to the range at the breaker before beginning service.
• Handle the control assembly carefully to avoid damage to the display and connectors.
• Use basic hand tools.

This thermostat control regulates oven temperature to help maintain consistent cooking heat and safe operation. It replaces a failed TO8 temperature control to restore normal bake/hold functions. What it does:

• Senses and regulates oven temperature to keep cooking cycles near set temperature
• Can stop heating or cause temperature swings when the original control fails
• Commonly replaced when oven won't heat, overheats, or cycles on and off erratically
• Works as the temperature-sensing/control component for the oven control system

• One thermostat control (TO8) as shown

• Disconnect power to the appliance before starting any repair to avoid shock
• Handle the control and its terminals carefully to avoid bending or breaking connections
• After installation, verify oven operation and temperature with an oven thermometer

This electronic range control is the oven's main user interface and control board, managing oven functions, timers and the display so your range responds correctly to cook settings and timers. What it does:

• Controls bake, broil, self-clean and timer functions via the front control panel
• Manages oven temperature setpoints and communicates with temperature sensors
• Powers and updates the digital display and clock/timer readouts
• Enables user inputs from the touchpad or selector knobs to activate cooking cycles
• Common symptom linkage: blank or unresponsive display, nonworking touchpad, oven not heating or not following set temperature

• Disconnect power at the breaker before attempting any service to avoid shock
• Handle the board and connector pins carefully to prevent ESD or damage
• Verify wiring connections and sensor continuity per OEM schematic during replacement