Husqvarna Parts

Fix fuel leaks and engine starting problems with this fuel line fitting. Connects separated fuel line sections on trimmers, blowers, and chainsaws.

Canvas vacuum bag assembly for leaf blower/vacuum models. Attaches to shaft to collect leaves and debris in vacuum mode. Replace when torn or worn from use.

Mower won't start or starter doesn't engage? This ignition switch activates your riding mower's electrical system. Simple DIY repair in under 30 minutes.

Drive control cable for self-propelled walk-behind mowers. Engages the propulsion mechanism gears. Replace if cable is frayed, broken, or stuck.

Replacement 4-in-1 lawn mower blade for mulching, bagging, lifting, and shredding grass. Replace if cracked, bent, or dull. Verify fit with model number.

Metal frame that holds the grass catch bag on walk-behind mowers. Replace if bent, broken, cracked, or damaged from repeated removal and installation.

If your chainsaw chain is coming loose or breaking off the guide bar, replace the chain catcher. This safety part prevents the chain from flying off.

Engine piston kit for gas trimmers and outdoor equipment. Replaces worn, damaged, or corroded pistons that cause poor compression and engine performance.

Blocks dirt and debris from entering your trimmer engine. Replace when clogged or worn to restore proper airflow and prevent rough running or starting issues.

A V-belt is responsible for transmitting energy. It is made from a thick and sturdy rubber material. It features grooves for improved traction and measures ½ x 95-1/2. A worn-down v-belt can lead to inefficient energy loss, and therefore poor performance. Installing this v-belt requires pliers and a wrench. First, the spark plug wire needs to be removed. Then, position the mower deck to the lowest possible level. Move the machine's blade engagement level to OFF. Remove the belt found from the engine pulley. Don't forget to take out the bow-tie pins and blade engagement cable as well. Remove the bolt from the pulley cover and loosen the nuts found at the idler pulley. Put the new belt and then tighten the nuts on the idler pulleys. The deck can now be re-assembled to its original position. This Husqvarna 532144959 V-Belt OEM Replacement can help keep a lawnmower in top condition. This genuine Husqvarna made V-belt is specifically for driving the blades on a lawnmower. It is compatible with Ariens, Craftsman, Poulan Pro, Dixon, and Husqvarna mowers. This V-belt is sold individually.

48-inch discharge deflector assembly for rear-engine riding mowers. Mounts to deck to direct grass clippings. Replace if cracked, broken, or missing.

Drag link ball joint connects the steering mechanism to the spindle on riding mowers and lawn tractors. Replace if worn, cracked, or loose fitting.

Shoulder bolt that attaches the suspension arm to the wheel bracket on riding mowers and tractors. Replace if bolt is stripped, worn, or missing.

This is a zone control cable that connects the handle-mounted bail lever to the engine's brake mechanism on a walk-behind lawn mower. When you squeeze the bail bar, this cable engages the blade and keeps the engine running; releasing it stops the blade and engine for safety. Replace this cable if the mower won't stay running when the bail is held, the cable is frayed or stretched, or the lever feels loose and unresponsive.

This is a coiled rewind spring that fits inside the recoil starter assembly of a string trimmer. It stores the energy needed to retract the starter rope after each pull, allowing the engine to be started repeatedly. Replace this spring if the pull cord does not retract on its own, feels loose, or if the spring is visibly broken or unwound.

Adjusts and maintains proper chain tension on your chainsaw. Replace if adjustment becomes difficult or chain loosens during use. Includes bolt, pin, gear, and o-rings. Confirm fit with your model number.