Husqvarna Parts

This part is a center front baffle. A baffle is connected beneath the lawnmower deck to help with the airflow. The baffle helps direct the grass clippings out to the discharge chute, into the grass clipping bag, or out as mulch. A new center front baffle may be needed if the original has been broken, cracked, or damaged in any way. The center front baffle is most commonly damaged by impact when it has run into something, such as a stump or concrete. The lawnmower operator may notice that the grass clippings are clumping up or not properly coming out of the discharge chute.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer and it is sold individually. This center front baffle is compatible with lawnmowers and riding lawn tractors manufactured by Husqvarna, Poulan, and Jonsered.

The snowblower is designed to remove snow from the surface over which it is run, but no snowblower is designed to totally eliminate all of the materials beneath it. Most leave a small skim coating that ensures the augers don't scrape along the ground and damage a walkway or drive. However, many are also equipped with a scraper bar that removes even more of the snow than the skid plates allow. If the scraper is damaged or bent, it will mean a less satisfactory performance by the blower. This is an OEM part that is very easy to install with little more than a properly sized screwdriver and a socket or wrench set. This replacement scraper bar is designed to fit many different snowblowers made by Husqvarna and Poulan, and works with more than 100 models. It ships individually with mounting hardware.

This is a replacement lawn tractor shield-deflector. The shield-deflector, or grass chute, is made from strong, high-quality plastic and attaches to the lawn tractor deck's side. Its purpose is to direct grass clippings and other debris away from the rider while mowing. Over time, the original shield-deflector can become worn and damaged, allowing debris to blow up onto the lawn tractor driver. Debris expelled from the lawn tractor can cause property damage, injury, or even death. Ensure the area is always clear of bystanders while mowing and consult the operator's manual to ensure proper installation of all replacement parts.This shield-deflector is designed to be a replacement for original worn or damaged shield-deflectors on AYP, Jonsered, Redmax, Craftsman, Poulan, Husqvarna, Poulan Pro, Weed Eater, and McCulloch 46-inch lawn tractor decks. This replacement shield-deflector is an OEM part that is sourced directly from the manufacturer. The shield-deflector is sold individually and does not come with hardware included. Tools needed for replacement may consist of; 1/2 inch socket, 7/16 inch socket, vise-grip pliers, a large flat-head screwdriver, and a hammer.

This part is a clean-out mounting clamp that is used on snowblowers. The purpose of the clean-out mounting clamp is to hold the clean-out tool. This component attaches to the auger housing and is manufactured out of a heavy-duty black metal material.A new clean-out mounting clamp may be needed if the original is cracked, broken, or damaged in any way. If the clean-out mounting clamp is missing from the snowblower, the operator may wish to replace this part out of convenience, although this part is not essential to the operation of the snowblower. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This clean-out mounting clamp is a genuine Husqvarna part. It is sold individually. This specific clean-out mounting clamp is compatible with snow blowers that are manufactured by the Husqvarna, Poulan, and Jonsered brands.

This part is a replacement drive control cable. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a worn out or faulty drive control cable in a variety of lawnmower models. The drive control cable is essential for proper control of the lawnmower as it stops the engine when the handle is released. If the cable is stretched, worn, or otherwise damaged, the equipment is not safe to use and this part should be replaced immediately. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this drive control cable, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this drive control cable is suitable for use on several different models of lawnmowers manufactured by Husqvarna and Jonsered. This is a genuine part made of high-quality, durable materials and is sold individually.

This replacement part is a clutch assembly intended for use in lawn equipment. This is a genuine replacement part made by Husqvarna. Clutches engage the blade of the lawn mower so that the user is able to properly cut grass. The clutch connects two different drive shafts so that they can be controlled by the toggle.A new clutch assembly might be needed if the current one is broken or damaged in any way. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by Husqvarna.

This part is a replacement V-belt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a snapped, worn, or otherwise defective V-belt in lawnmowers. The V-belt helps to transfer torque to power the lawn mower and make it drivable. Belts are subject to wear and tear and can easily be worn down or snap due to regular use or weathering. If this occurs, the belt will need to be replaced. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this V-belt, the appropriate owner's manual and equipment diagrams should be referred to. This V-belt is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with lawnmowers that have been manufactured by Husqvarna and Poulan.

This mulching blade is a 3-in-1 blade. It can cut, discharge, and bag grass clippings. This versatility is due to its curved surface design, which promotes an increased cutting edge. When this mulching blade is in action, the grass clippings will be transferred to the deck and cut once more. Once it falls back to the ground, the clippings are smaller. Smaller clipperings are suitable for mulching because they decompose faster. A mulching blade is made from sturdy metal, but prolonged use can make its edges dull. A dull mulching blade will result in undesirable fraying and tearing cuts. A mulching blade replacement takes 30 minutes or more. Start by disconnecting the spark plug and turn the machine on its side. Then, remove the old blade. Insert the replacement into the blade spindle and use a ratchet for a secure fit. This original Husqvarna mulching blade replacement is a perfect choice. It is made explicitly for lawnmowers from Husqvarna, Murray, Craftsman, Weed Eater, Ariens, Ryobi, and Poulan. It measures 22 and comes in solid metal construction. It is sold individually.

This genuine Husqvarna drive belt can be used as a replacement part for snowblowers. A drive belt for snowblowers is to facilitates the rotation of the augur, which, in turn, picks up the snow and then expels it while redirecting it away from the user of the snowblower.A drive belt might have to be replaced in the lifespan of a snowblower if it is damaged in such a manner that it cannot control the rotation of the augur. Symptoms of a damaged or malfunctioning drive belt can include squeaking and squealing noises, cracks, frays, and rips. If a drive belt suffers from one of these forms of damage and exhibits these symptoms, it should be replaced with this genuine OEM replacement part immediately and before using the snowblower again. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This drive belt is compatible with the following brands: Husqvarna, Craftsman, and Poulan.

This replacement part is a spring. Springs create torque and ensure that components remain secure during equipment use.Due to the amount of pressure they experience during use, springs can snap over time. If a spring has become loose and no longer holds enough tension, it should be replaced.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This replacement part is a grip handle. This is a genuine replacement part made by Husqvarna. This grip handle allows the user to have a stronger and more secure grip while maneuvering the machine to the desired areas. A new grip handle might be needed if the current one is missing or damaged. If the handle is not up to working condition it might not feel comfortable to hold. This might mean that the user will not be able to maneuver the machine. If this is the case the grip handle should be replaced as soon as possible. The repair should be fairly easy and only require common household tools. This grip handle is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.