Need Help?
Call
Fix loud sawing noise or error code 4d21/4d22 in your oven. This tangential cooling fan motor restores proper airflow. Moderate difficulty repair.
I replaced the cooling fans (the upper one was totally burned out). Oven (13 years old) works like new now. Read more
This is a replacement sealed burner cap. This is a genuine OEM part made by Whirlpool and has been sourced directly from the manufacturer. This part is intended to replace a broken, misplaced, or defective burner cap in various models of gas ranges and stoves. Electrodes are included.This sealed burner cap protects the surface burner and allows the cooktop to light properly. If the gas igniter is glowing but does not ignite, the stove won't start up, or there will be a gas smell. Proper tools may be required to replace this part. Always ensure the appropriate safety precautions are adhered to when attempting to fix any appliances. Make sure that the stove is entirely disconnected from gas and power before starting the repair work. For more accurate information on how and where to install this sealed burner cap, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this burner cap is suitable for use on several different models of gas stoves, ranges, and cooktops manufactured by Whirlpool, Maytag, KitchenAid, Amana, and other Whirlpool brands. This is a genuine part made of high-quality, durable materials and is sold individually.
These are very easy to replace ,just gave the old one a quarter turn lifted it out took the two wires off (noted where each one will go on the new burner ) pop the wires onto the new burner put it on and good to go. Read more
Replace cracked, shattered, or broken door glass on your range or oven. This glass panel installs in the door assembly to provide insulation and visibility.
Microwave won't start or runs only when door is pulled? Replace faulty door interlock switches. This 2-pack covers top and bottom switches. DIY repair.
First, it was going to cost $95 for an appliance guy just to look at it! I figured there would be an upcharge on the parts + labor on top of the $95, so I took a chance & decided my husband & I could fix it cheaper; we were right, but it was a 3 week process (luckily, we have another microwave in the basement we were able to use in the meantime). I googled the microwave model #, then price checked the same item I thought we needed; printed off the diagrams of the various microwave "systems" &... Read more
Microwave turntable won't rotate or stops under load? This turntable motor restores even heating. Accessed from the bottom with basic tools.
Removed bottom cover plate and unscrewed motor housing Read more
Microwave won't turn on or has no power? A blown fuse is often the cause. This safety component protects against electrical surges and short circuits.
I have a Jenn-Air microwave that didn't turn on and had no lights. It just stopped working completely. I unplugged the unit and had to remove the rear cover using a *security screw kit* that prevents people from opening the rear panel. Once opened, I removed the fuse and testing it with an OHM reader to determine that the fuse went bad. But I also had to determine why the fuse blew and noticed a sticky oily substance under the Capacitor. I used a rubber glove and needle nose pliers to... Read more
Adjustable leveling leg that stabilizes and balances your range. Replace if cracked, broken, bent, or threads are stripped from wear or impact damage.
The problem was partly caused because the original legs were at full extension. The replacement legs were longer than the originals and were more secure at the needed length. One difficulty was that the threaded base plate where the legs screwed in had been damaged and had to be reshaped, I was able to reshape the sockets with some effort, to allow the legs to thread in, though one remained slightly angled. (A metal tool of some type which could be threaded in and used to bend the socket area... Read more
Fix a dim or blank oven display, unresponsive controls, or temperature control issues with this control board. Easy DIY repair in under an hour.
Appliance Parts Pros was amazing to work with in getting the right part for our 15 year old JennAir Double Oven. I ordered the part around 4 pm on Wednesday, and it was here to my house the next day! We installed it this weekend, and it works perfectly. Such an easy repair; we popped out the old component, installed the new one, attached the three electronic connections, flipped the breaker back on, and voila....it worked. Thanks Appliance Parts Pros for your great service and fast delivery... Read more
Burner not heating or heating unevenly? This surface heating element restores proper heat generation. Requires removing cooktop access panel.
Replacement control knob for range burners. Installs on the control shaft to adjust heat levels. Replace if cracked, broken, markings worn off, or missing.
We recently purchased a house with Jenn-Air appliances. The previous owner had used something to clean the knobs on the stove that removed the imprint. Ordering these was easy, they fit with no problem and are manufacture initial product quality. Very Pleased. The only suggestion I would have is to provide instructions on how to install the oven door gasket. I have not attempted that yet but will soon. Read more
Replace your cracked, broken, or worn range control knob. Push-on design installs on the control switch shaft. Restores full functionality to your cooktop.
Ordered new cook top, arrived in 2days. Replacement was very easy. Part was perfect fit and had same markings as factory top. Repair only required a philips head screwdriver. Removed 8 screws holding top on, lifted front up and unplugged two electrical connectors, them removed top. Flipped top over and removed the four burners (8 screws). Moved burners to new top, installed 8 screws, set top on stove, reattach electrical connectors, then reinstall 8 screws to hold the top on. Only issue I... Read more
Left-side oven door hinge that supports and controls door movement. Replace if hinge is cracked, broken, or door won't close flush, allowing heat to escape.
The replacement hinge unit arrived in just two days. The JennAire (Maytag) oven door is fairly typical in that it easily lifts off of the hinge bars. Once the door is off then removing two screws is all that's required to remove the hinge unit from the oven. The new hinge slides up into place and while you hold it up inside of its location putting the old screws back in is very easy. After sliding the door back down onto the hinge bars the oven is as good as new Read more
Replacement hinge that supports and controls your oven door movement. Install if your hinge is cracked, springs are weak, or door won't align properly.
Removed oven door, took door apart replaced oven hinges. Pulled oven out of recess to access hinge receptacle. Replaced hinge receptacle. Read more
Color: stainless steel. It measures about 2 inches in diameter.
Fix a broil burner that won't light or clicks repeatedly. This spark electrode generates the ignition spark needed for reliable broil operation.
I replaced the Gas Range Broil Burner Spark Electrode Read more
Controls and stabilizes gas supply to your cooktop's burner system. Replace if the regulator is damaged, leaking, or failing to maintain proper pressure.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.