Jenn-Air Dishwasher Parts

The Pump and Motor Assembly is an OEM part for Whirlpool dishwashers. This assembly is crucial for circulating water throughout the dishwasher during the wash and rinse cycles. It ensures that water is distributed effectively to clean dishes and then drained out of the appliance after the cycle is completed.

Causes of a bad pump and motor assembly can include wear and tear from regular use, blockages from food particles or debris, electrical issues, or damage to the motor or impeller. Such issues can severely affect the performance of the dishwasher.

Symptoms of a bad pump and motor assembly include:

• The dishwasher not draining properly or leaving water at the bottom
• Unusual noises during operation, such as grinding or humming
• Inadequate cleaning results due to poor water circulation
• The dishwasher not starting or stopping mid-cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dishwasher Water Inlet Valve is an OEM part for Whirlpool dishwashers that is responsible for controlling the flow of water into the dishwasher at the start of each wash cycle. The water inlet valve opens to allow water to enter the dishwasher and then closes to ensure the correct amount of water is used during the cycle. Redesigned: Valve mounts directly on the frame and no longer includes or requires the mounting bracket.

Symptoms of a bad Dishwasher Water Inlet Valve include:

• Inadequate water filling the dishwasher.
• Overfilling, which can cause leaks and potential water damage.
• Unusual noises coming from the valve area.
• The dishwasher not starting.

Causes of a bad water inlet valve can vary from mineral buildup from hard water, which can block the valve, to mechanical failure or wear and tear over time. Electrical issues can also affect the valve's operation, preventing it from opening or closing properly.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Spinner Kit is an OEM part for Whirlpool dishwashers. The spinners are responsible for spraying water to effectively clean and rinse dishes. Over time, spinners may wear out or break, impacting performance. If your dishwasher isn't cleaning properly, inspect the spinners first

Causes of a bad Spinner Kit can include mineral buildup from hard water, which may block the water jets, or physical damage to the spinner arms that can occur from loading large or improperly placed dishes.

Symptoms of a failing Spinner Kit include:

• Dishes remaining dirty or spotted after a wash cycle
• Water not spraying adequately throughout the dishwasher
• Unusual noise during the wash cycle as the damaged spinner struggles to rotate
• Decreased water pressure affecting overall appliance performance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Water Level Switch is an OEM part for Whirlpool dishwashers. It monitors and regulates the water level inside the dishwasher during wash cycles, ensuring the correct amount of water is used for optimal cleaning performance.

The water level switch can fail due to several reasons, such as electrical issues, mechanical wear over time, or damage from water exposure. Blockages or debris can also interfere with its proper functioning.

Symptoms of a bad water level switch include:

• The dishwasher not filling with water
• Overfilling or flooding inside the dishwasher
• The dishwasher stopping mid-cycle or not progressing through cycles
• Error codes related to water levels

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Water Supply Tube is an OEM part for Whirlpool dishwashers. This part ensures that water is efficiently delivered from the dishwasher's pump to the spray arms, which then distribute the water to clean the dishes.

Causes for issues with the water supply tube often involve physical damage, such as cracks or holes, clogging from food particles or mineral deposits, and wear and tear from regular use.

Symptoms of a malfunctioning Water Supply Tube include:

• Poor cleaning results due to inadequate water flow to the spray arms
• Water leaking from the dishwasher if the tube is cracked or damaged
• Unusual noises from the dishwasher, indicating issues with water distribution

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Rear Adjuster Guide is an OEM part for Whirlpool dishwashers, designed to ensure the smooth operation of the adjustable upper rack. This component plays a pivotal role in allowing the rack to move up and down effortlessly, accommodating various sizes of dishes and cookware. 

Causes for replacement may include wear and tear from regular use, accidental damage, or the natural degradation of materials over time. A malfunctioning adjuster guide can hinder the dishwasher's efficiency and capacity, making it challenging to fit larger items or optimize space for effective cleaning.

Symptoms of a bad Rear Adjuster Guide include:

• Difficulty adjusting the height of the upper rack
• The rack becoming stuck or misaligned
• Unusual noises when moving the rack

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Inlet Assembly is an OEM part for Whirlpool dishwashers. It is responsible for controlling the flow of water into the dishwasher during the wash cycle. This assembly ensures that the correct amount of water enters the dishwasher to clean dishes effectively.

You should replace the inlet assembly if it becomes faulty. Causes of a bad inlet assembly can include wear and tear from regular use, blockages from debris or mineral buildup, or electrical issues. A malfunctioning inlet assembly can lead to inadequate water flow, which affects the dishwasher’s cleaning performance.

Symptoms of a bad inlet assembly include:

• The dishwasher not filling with water or filling slowly
• Water leaks around the inlet area
• Error codes related to water intake issues
• The dishwasher stopping mid-cycle or not starting

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Whirlpool Dishwasher Door Gasket is an OEM part for Whirlpool dishwashers. It provides a watertight seal around the door to prevent water leaks during the wash cycle.  With a length of 66.5 inches, this part forms an airtight seal around the dishwasher door, preventing water leaks during operation.

Causes of a bad door gasket can include cracks and breaks developing from repeated exposure to temperature changes during wash cycles. Over time, rubber perishes leaving gaps that compromise the seal.

Symptoms of a failing door gasket:

• Water pools on the floor in front of the dishwasher
• Dishes remaining wet after a full cycle
• Visible cracks or tears in the rubber

This genuine OEM  part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.

The Left Adjuster Housing is an OEM replacement part for Whirlpool dishwashers. It is a component that helps to ensure proper alignment and stability of the dishwasher tub or rack system during operation.

Symptoms of a need to replace the left adjuster housing include:

• Difficulty sliding the dishwasher racks in and out smoothly
• Excessive noise or rattling sounds during wash cycles
• Visual signs of misalignment or tilting of the dishwasher tub or racks

Causes of a faulty left adjuster housing can include general wear and tear, physical impact or mishandling, corrosion or damage from moisture exposure, or manufacturing defects in the component itself.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models. 

The Float Switch Base Gasket is an OEM part for Whirlpool dishwashers. This gasket is specifically designed to seal the area around the float switch base, preventing water leaks that can occur during the dishwasher's operation. 

Causes of damage to the Float Switch Base Gasket often involve normal wear and tear, as the rubber or plastic material can degrade over time due to exposure to detergents, hot water, and the mechanical action of the float switch. 

Symptoms of a bad Float Switch Base Gasket include:

• Water leaking from the bottom of the dishwasher
• Signs of water damage or corrosion around the float switch area
• The dishwasher may malfunction or display error codes related to water filling issues if water leaks interfere with the float switch operation.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Spray Arm is an OEM part for Whirlpool dishwashers. It plays a crucial role in the cleaning process by rotating and spraying water onto the dishes to remove food particles and debris. The spray arm measures approximately 18.75 inches long and 2 inches wide.

Causes of a bad spray arm can include clogging due to food particles or mineral deposits, cracks or breakage from regular use, or a malfunction in the rotating mechanism. These issues can impede the spray arm's ability to distribute water effectively, leading to poor cleaning performance.

Symptoms of a bad spray arm include:

•  Dishes not being cleaned properly
• Noticeable clogs or blockages in the spray holes
• The spray arm not rotating during the wash cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Adjuster Cover is an OEM part for Whirlpool dishwashers. This part allows for the vertical adjustment of the dishwasher's upper rack to accommodate larger items in either the upper or lower rack. The adjuster cover protects the internal components of the adjuster mechanism from water, detergent, and debris, ensuring smooth operation and extending the life of the adjuster mechanism.

Over time, the adjuster cover can become worn or damaged due to exposure to harsh dishwasher detergents, high water temperatures, and general wear and tear. 

Symptoms of a bad Adjuster Cover include:

• The upper rack becomes difficult to adjust or won't stay in the desired position.
• Visible cracks, warping, or breakage of the cover.
• The adjuster mechanism gets easily clogged with debris or corroded by detergent.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Silverware Basket Assembly is an OEM part for Whirlpool dishwashers. It provides an organized space for holding and separating silverware and small utensils during the dishwashing cycle, ensuring they are properly cleaned and dried. This basket measures 8 inches wide, 11-1/2 inches high, and 12 inches deep. 

You should replace the silverware basket assembly if it becomes cracked, warped, or damaged. Causes of a bad silverware basket assembly can include regular wear and tear from repeated use, damage from overloading or mishandling, and exposure to high temperatures.

Symptoms of a bad silverware basket assembly include:

• Broken or missing sections of the basket
• Utensils slipping through holes or falling out
• Difficulty placing or removing silverware
• Inefficient or uneven cleaning of silverware

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Pump and Motor Assembly is an OEM part for Whirlpool dishwashers. It is crucial for circulating water throughout the dishwasher during the wash and rinse cycles, ensuring efficient cleaning of the dishes.

You should replace this pump and motor assembly if it becomes defective or worn out. Causes of a bad pump and motor assembly can include regular wear and tear, blockages from food particles or debris, and damage from hard water deposits. A malfunctioning assembly can lead to poor water circulation, affecting the dishwasher's cleaning performance.

Symptoms of a bad pump and motor assembly include:

• Inadequate cleaning of dishes
• Unusual noises during the wash cycle
• Water not draining properly from the dishwasher
• Error codes related to water circulation or drainage issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dispenser is an OEM part for Whirlpool dishwashers. It is responsible for releasing detergent and rinse aid during the washing cycle. This dispenser ensures that the right amount of cleaning agents is dispensed at the appropriate times, contributing to effective cleaning and rinsing of your dishes.

Causes of a bad dispenser can include clogging due to detergent buildup, mechanical failure of the dispenser door or latch, or electronic malfunction that prevents proper operation. Regular maintenance can help prevent these issues, but over time, parts may still wear out and need replacement.

Symptoms of a bad dispenser include:

• Improper dispensing of detergent or rinse aid
• Dishwasher leaving spots or residue on dishes
• Dispenser door not opening during the cycle
• Leaks or drips from the dispenser area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Right Adjuster Housing is an OEM part for Whirlpool dishwashers. It is responsible for holding and supporting the right side of the upper dishwasher rack, allowing for height adjustments to accommodate various dish sizes.

Over time, the right adjuster housing can become worn or damaged due to regular use, heavy loads, or accidental mishandling. When the adjuster housing fails, it can affect the stability and functionality of the upper rack.

Symptoms of a bad Right Adjuster Housing include:

• Difficulty adjusting the height of the upper rack
• The upper rack not staying in place or appearing unbalanced
• Unusual noises or resistance when moving the rack

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.