Kenmore / Sears Manual, Care Guide

This replacement Energy Guide label restores the factory energy-rating label so your appliance displays required efficiency info and model details clearly. It's a direct cosmetic/identification replacement for a missing, faded, or damaged label. What it does:

• Replaces a torn, faded, or missing Energy Guide sticker so energy-use info and ratings are visible
• Restores factory identification and the printed efficiency/consumption information
• Helps meet labeling requirements for resale or service identification
• Provides the original look and placement when applied in the correct location

• One adhesive Energy Guide label

• Surface must be clean, dry, and free of oils or residue before applying
• Align carefully and press firmly; smooth from center outward to avoid bubbles
• Intended as a cosmetic/identification replacement only; does not affect appliance operation
• If label area is textured or damaged, consider a smooth restoration first for proper adhesion

This replacement Energy Guide label is the adhesive sticker that displays an appliance's estimated yearly energy use and operating cost in plain, easy-to-read format. It restores a legible energy information label for appliances with missing, damaged, or faded guides. What it does:

• Shows the estimated yearly energy consumption and cost information found on the original Energy Guide label
• Replaces torn, worn, or illegible labels so energy info is visible again
• Helps consumers compare energy use when evaluating or reselling an appliance
• Fits where the original factory label was mounted — typically on the interior or exterior cabinet

• One (1) adhesive Energy Guide label

• Surface-mount sticker: clean and dry the application area before installing for best adhesion
• Peel the backing and press firmly to apply; smooth out any bubbles
• Avoid installing on wet or heavily textured surfaces; not reusable once removed
• Dispose of the old label properly; no special tools required

This energy guide label is the factory replacement sticker that displays verified energy consumption and efficiency information for a refrigerator. It restores the visible energy-rating label so users can quickly confirm estimated energy use. What it does

• Shows the appliance's official energy consumption and estimated yearly operating cost.
• Restores a missing or damaged energy rating label for resale, service, or regulatory compliance.
• Helps owners verify efficiency details without opening the appliance.
• Peels and sticks to a clean, flat exterior surface for long-lasting placement.

• Clean and dry the mounting area thoroughly before applying.
• Peel backing and press label firmly, smoothing out air pockets.
• Align label carefully; adhesive is permanent and may not re-adhere once removed.
• Follow any local disclosure or placement requirements when replacing the label.

This replacement Energy Guide label restores the appliance's factory energy-use info and on-appliance rating sticker so usage and efficiency details are readable. It's a simple adhesive label made to match the original factory marking. What it does

• Displays the appliance's energy-consumption information and rating details in the original on-unit location.
• Replaces faded, torn, or missing energy guide stickers so required energy information is visible.
• Helps technicians and owners verify appliance energy-use data during service or resale.
• Keeps the appliance looking complete with a manufacturer-style label.

• One adhesive Energy Guide label (single sticker only).

• Clean and dry the mounting surface before applying to ensure adhesive bonds properly.
• Peel the backing and align carefully; apply firm pressure to remove air bubbles.
• Do not stretch or fold the label; replace only if the original label location is intact and flat.

This replacement Energy Guide label is the adhesive sticker that displays an appliance's official energy use and efficiency information. It restores missing or unreadable labeling so buyers and service techs can see the appliance's energy guidance. What it does

• Replaces a torn, faded or missing Energy Guide sticker so the appliance shows its official energy-use information.
• Restores readable energy and efficiency details typically found on refrigerators and similar appliances.
• Helps clarify operating cost and efficiency ratings for resale, service, or inspection.
• Cosmetic replacement only—does not affect appliance operation or performance.

• One Energy Guide label (adhesive sticker)

• Clean and dry the installation area; remove old adhesive residues before applying.
• Peel and stick the label in the original location; align carefully—adhesive is permanent once applied.
• No tools or electrical disconnection required for label replacement; handle gently to avoid creasing.
• Replace only with the correct OEM label for accurate energy information.

This Energy Guide label is the official adhesive sticker that displays a refrigerator's estimated energy use and efficiency info. It replaces a damaged or missing energy rating label so you can keep appliance labeling accurate. What it does:

• Shows the appliance's estimated yearly energy use and efficiency information
• Restores required consumer-facing energy labeling for resale or inspection
• Helps clarify energy-cost expectations when evaluating appliance performance
• Replaces a torn, faded, or missing factory sticker on the cabinet or inner panel

• Clean and dry the mounting surface before applying to ensure good adhesion
• Peel protective backing and press firmly, smoothing out any air bubbles
• Apply to a flat, accessible area where label is visible and not subject to frequent wear
• If replacing a damaged label, remove residue with an appropriate adhesive remover and follow manufacturer surface prep recommendations

This is an adhesive Energy Guide label that mounts on the appliance exterior to show the manufacturer's estimated energy use and rating. Replaces a missing, torn, or unreadable energy guide so ratings are clearly visible. What it does:

• Displays the appliance's estimated energy consumption and efficiency information.
• Restores required labeling if the original guide is damaged or removed.
• Helps homeowners verify energy rating details at a glance.
• Common symptom: label is missing, badly faded, or illegible.

• Surface must be clean, dry, and free of oils or residue before applying.
• Peel-and-stick installation; align carefully—adhesive is permanent and difficult to reposition.
• No tools required; follow the original label location and orientation for compliance.

This Energy Guide label is the factory replacement adhesive sticker that displays the appliance's estimated annual energy use and operating cost. Keeps required efficiency information visible and legible for buyers or service. What it does

• Replaces the original Energy Guide information sticker used to show estimated yearly energy consumption and cost.
• Restores a readable efficiency label when the factory label is damaged, worn, or missing.
• Helps maintain correct product identification and energy disclosure for resale or inspection.
• Fits where the original label was mounted and adheres to the appliance surface.

• One adhesive Energy Guide label (single sticker)

• Clean and dry the mounting area before applying; adhesive bonds best to smooth, grease-free surfaces.
• Peel backing and press firmly, smoothing out air bubbles.
• Do not use as a structural or functional part—label only; follow appliance warnings and safety instructions.

This is a replacement Energy Guide label designed to restore the factory energy-rating sticker on compatible refrigerators. It provides the visible energy-use and efficiency information originally displayed on the appliance. What it does:

• Replaces a lost, damaged or faded Energy Guide sticker so energy information is visible
• Restores the appliance's factory energy-rating label for resale, inspection, or record-keeping
• Helps users confirm energy usage information at a glance
• Adhesive-backed for easy placement in the original label location

• One replacement Energy Guide label (adhesive-backed)

• Clean and dry the mounting area before applying to ensure proper adhesion
• Align carefully; press firmly across the label to secure
• For best results, apply at room temperature and avoid repositioning once adhered