Kenmore / Sears Microwave Parts

• Door won't close

I replaced the parts with the help of a video provided by Appliance Parts Pros! There was enough detail that I was able to figure out what to do for my model of Advantium and the replacement went very well! It's like having a new appliance! Read more

• broken bulb

Knowing the odds of 2 failures occurring at the same exact time was unusually high, I just searched your site for what other broken items might affect these two failures. Came up with next control item upstream and tallied that item failure with percentages of successful repairs, (4 mins.) door safety switch. Since I had to change out the most likely of the 3 and since I was already was going to be into the switch panel I ordered all 3 and swapped them all out to cover my butt, as they were... Read more

I recently tackled a repair on my GE microwave (model JVM1440BD003, manufactured in 2003) to replace the light bulb sockets for the under-microwave lights. Since one socket was failing, I decided to replace both at the same time to avoid future issues. I used two WB08X10016 light sockets, which are the correct OEM parts for this model. The process started off smoothly thanks to a helpful installation video on the website. It made the job look straightforward: remove five screws to drop the... Read more

Knowing the odds of 2 failures occurring at the same exact time was unusually high, I just searched your site for what other broken items might affect these two failures. Came up with next control item upstream and tallied that item failure with percentages of successful repairs, (4 mins.) door safety switch. Since I had to change out the most likely of the 3 and since I was already was going to be into the switch panel I ordered all 3 and swapped them all out to cover my butt, as they were... Read more

• Door stuck closed

I called Samsung Customer Support and was told I'd need to enter a service ticket since this repair was not something an owner could fix. Then I checked on line and found the parts on AppliancepartsPros.com and read the reviews from other owners about how simple this repair was. I ordered the parts, they were delivered within 2 days. The repair could not have been easier. I used a table knife to remove the plastic inner door, replaced the broken latch, snapped the plastic inner door back in... Read more

Arrived in a huge box nice and safe......thank you Read more

I attempted to diagnose the four thermostats/thermal switches in the microwave....two right behind the control panel, one on top of the cooking cabin, and one under a metal shroud above the magnetron. While checking continuity with a voltmeter, i questioned one of them behind the control panel and the one above the magnetron. I then noticed a burn mark on the plastic connector sleeve for the one above the magnetron. I took a scrap piece of 14 gage copper wire and beat the ends flat with a... Read more

Called AppliancePartsPros because of good experiencing diagnosing problem with a dishwasher repair. We definitely are modest income amateurs! Same excellent response to our questions. Three possible causes. Used easy search menu to fine replacement parts. Bought all three, knowing that if all not needed, the others could be returned (within 365 days) for refund. Replaced the capacitor successfully after calling to get more help with a couple of places where we got stuck. Oven now works... Read more

Well, I gotta say I was happy to find you still had parts for almost 20 year old microwaves. The microwave itself worked fine, so I hated to have to buy a new one, but I just couldn't take being hit in the head anymore; and my fix of using string and wire to tie it to the surrounding cabinets was unsightly to say the least. I'm glad I did some research and found this part - all I had to do was pop it in place and now the vent grill is secure. Problem solved with minimal cost. Read more

I got it in the mail, I opened it, I handed it to my wife....and she installed it. Easy-Peasy! (Being retired is a blast) Read more

I ordered the door switches, switch monitor and the lever switch. i replaced all of the parts and the oven started to function only to have it fail again after 2-3 operations. I eventually determined that the main fuse holder was not completely securing the fuse. i believe the combination of new switches and realigning the fuse clip solved the problem. Read more

• Noisy
• Tray won't turn

Removed 8 screws from bottom panel on microwave. Pulled two prong plug off old motor. Read supplied voltage off motor decal and tested for it. Deemed motor to be bad and changed it. Works great. After tearing old motor apart it seems a liquid got in there from inside microwave. No seal on motor. Bad design flaw in my opinion. Read more

GE Microwave/Convection Oven. Removed case (carefully). Tested in-line power cord fuse with multi-meter. Fuse was good. Noticed a scorch mark on a wire connected to the oven cavity thermal fuse. The fuse appeared to have been overheated from too much movement in it's mount. Removed part from unit and used number on the part to order a new one. Installed new part, re-assembled, and unit works fine. Read more

Inserted new bulb. Read more

It is difficult (if not impossible) to remove the electronic switches from the hard plastic latches. I replaced all three switches and both the upper and lower latches I also replaced the main 20 amp ceramic fuse which blew out when the latch/switches failed. Read more