Lg Burner & Related Parts

The LP Conversion Kit is an OEM part for LG dryers. This kit is designed to convert a natural gas dryer to use liquid propane (LP) gas. It includes all necessary components to make the conversion safely and effectively, ensuring the dryer operates efficiently with LP gas.

Causes of needing an LP Conversion Kit can include relocating the dryer to an area where only LP gas is available or switching from natural gas to LP gas to meet specific household energy requirements. Proper installation of the conversion kit is crucial for safe and efficient dryer operation.

Symptoms indicating the need for an LP Conversion Kit include:

• Relocating to a home with LP gas service
• Switching energy sources due to availability or preference
• A new dryer installation where only LP gas is supplied

This OEM LG part is also compatible with Sears/Kenmore.

The Gas Valve Assembly is an OEM replacement part for LG gas dryers. It precisely controls the flow of gas to the burner unit during drying cycles. 

Symptoms of a faulty gas valve include: 

• Inadequate or inconsistent heating 
• Burner failure to ignite properly
• Error codes related to gas or pilot light issues

Causes may involve wear and tear of valve seals over extended use, blockages limiting gas flow, or damage like dents that compromise valve integrity.

This authentic LG assembly is compatible with select Kenmore brand models. 

For propane order 383EEL3002A.

The Nozzle is an OEM part for LG ranges. It is a small component located inside the burner box that emits gas to create flame. During operation, the nozzle precisely meters fuel flow to each burner to achieve balanced and consistent heating. 

Symptoms of a faulty nozzle include: 

• Burners that light unevenly or emit an irregular flame pattern
• Inability to adjust burner flames or in some cases, lack of ignition
• Possible safety hazard from gas emissions not mixing or igniting properly

Causes can stem from mineral buildup clogging the narrow opening over time. Damage, such as nicks or corrosion, may also disrupt critical gas flow.

This OEM LG part is also compatible with some Kenmore ranges featuring LG gas cooktop systems. Replacing a worn nozzle restores optimal and safe burner performance.

This gas valve assembly controls and delivers gas to the burner when the appliance calls for heat. Replacing a failing valve restores reliable ignition, steady flame, and consistent heating performance while maintaining proper safety shutoff when not heating.

• Regulates gas flow to the burner(s) under the appliance's control and safety circuits
• Provides positive gas shutoff when no heat is requested
• Helps resolve no heat/flame, igniter glows or sparks but no ignition, burner lights then goes out, or intermittent heating
• Before replacement, also inspect the igniter, flame sensor, wiring, and regulator settings

• Disconnect electrical power and turn off the gas supply before servicing
• Note connection orientation; transfer any required fittings or brackets from the original valve
• Use an approved gas-rated thread sealant where applicable and leak-test all joints with a soap solution after installation
• Verify proper ignition and stable flame per the product's service or test procedure

This governor assembly is the mechanical control that stabilizes and regulates motion within the appliance's drive mechanism. Replacing a worn governor restores smooth, consistent operation and helps prevent erratic movement that can strain connected components. What it does:

• Regulates and limits the speed/rotation of the linked drive for stable, predictable movement
• Helps synchronize gears or shafts so the mechanism operates smoothly
• Common symptoms: intermittent or no movement, jerky/erratic motion, clicking or grinding noises
• Visible wear, cracks, or a loose/broken hub on the original governor

• 1 governor assembly

• Disconnect power before servicing; allow moving parts to come to a complete stop
• Note the original orientation; take photos to aid reassembly
• Transfer any reusable brackets, clips, or spacers from the original if required
• After installation, rotate the mechanism by hand to verify free movement before restoring power

The Burner Cap is an OEM part for LG gas ranges. It sits securely over each sealed burner unit to direct flame upward for focused cooking power.

Causes relate to mineral deposits from years of flame exposure leading to reduced airflow. Damage may occur from rough pot handling as well.

Symptoms of a faulty burner cap can include:

• Yellowing or excessive carbon buildup
• Uneven browning or hotspots on pots and pans
• Flames not fully contained under cookware

This LG part is also compatible with some Kenmore models.
 

This gas valve assembly controls gas flow to the appliance's burner, restoring reliable ignition and heating when the original valve fails. It replaces a faulty or leaking valve to help the unit heat safely and consistently. What it does:

• Regulates and routes gas to the burner based on the appliance's control signals
• Prevents gas flow when the appliance is off or during safety shutoff conditions
• Commonly used to address symptoms like no heat, weak heating, or a persistent gas smell when confirmed at the valve
• Works as the appliance's primary gas control component in the fuel delivery system

• One gas valve assembly

• Turn off gas supply and disconnect power before servicing; verify both are isolated
• Inspect all gas fittings and use an approved leak detection method after installation
• Do not modify the part; use proper tools and follow manufacturer service instructions

This Pipe Assembly routes water into the appliance so the dispenser and ice maker can receive a steady supply. Replacing a damaged tube restores proper water flow and helps stop leaks or pooling inside or beneath the unit. What it does:

• Carries incoming water from the household supply to the appliance's internal water system
• Restores water delivery to the dispenser and ice maker when the original tube is cracked or blocked
• Prevents leaks and water damage caused by split, corroded, or pinched tubing
• Helps eliminate intermittent flow or weak dispenser output caused by a damaged water line

• One complete pipe assembly as shown

• Shut off the refrigerator's water supply and unplug the appliance before beginning
• Handle tubing fittings carefully; use proper tools to avoid damage or overtightening
• Inspect connection points and replace seals or clips if worn; test for leaks after reinstalling

The Conversion Kit is an OEM component specifically designed for LG gas ranges. This kit allows compatible electric and gas models to be converted between each type of fuel source.

Causes of needing a conversion kit include changing preferences between gas and electric cooking needs. Proper conversion maintains safety and performance. 

Symptoms of an incompatible fuel type include:

• Inability to ignite burners on a gas range  
• Lack of heating elements for an electric range
• Error codes or hazardous pilot light issues

This OEM LG part is also compatible with Sears/Kenmore ranges. Converting the fuel type with an official kit ensures the appliance operates as intended with its new power source. Dedicated expertise and parts maximize safety and efficiency.
 

This small burner cap covers and protects the burner head on gas cooktops, helping maintain an even flame and reliable ignition. It replaces a damaged or missing cap so burners heat and light as intended. What it does:

• Covers the burner head to protect ports from spills and debris
• Helps direct and stabilize the gas flame for more even heating
• Supports consistent ignition by providing correct burner geometry
• Common symptom: burner flame is uneven, weak, or won't light reliably

• Turn off the cooktop and let all parts fully cool before servicing
• Remove and clean the burner head and surrounding area before fitting the new cap
• Set the cap onto the burner head so it sits flat and snug; do not force or pry
• If ignition issues persist after replacement, inspect burner ports and igniter for obstruction or damage

This large, dull-finish burner cap replaces the top cover for a cooktop's large burner, restoring proper heat distribution and stable ignition. It matches OEM shape and finish to keep your burner working and looking right. What it does:

• Covers the large burner head to evenly distribute flame/heat across cookware
• Protects the burner head and ports from spills and debris that can affect ignition
• Helps maintain consistent flame pattern for better cooking performance
• Useful when the existing cap is warped, cracked, or cosmetically worn

• Ensure the cooktop and burner are completely cool before replacing the cap
• Remove old cap, clean burner head and surrounding area of debris, then set new cap seated flat on the burner
• No special tools required; verify proper seating before lighting burner

This medium burner cap is a replaceable cooktop part that covers the burner head to protect components and help promote even heat across cookware. Restores proper seating and appearance on worn or damaged burners. What it does:

• Covers the burner head to protect the internal burner from spills and debris
• Helps promote even heat distribution from the burner to cookware
• Can correct uneven flame or heating caused by a warped or damaged cap
• Restores the cooktop's finished appearance when the original cap is chipped or discolored

• Ensure the cooktop is completely cool and the appliance power/gas is off before handling
• Remove old cap, clean burner area of debris, then seat replacement cap firmly in place
• No tools required for most installs; align cap so it sits flush and stable

This cap burner assembly replaces a worn or damaged gas burner cap and base to restore even flame coverage and reliable surface cooking heat. It fits compatible gas cooktop burners and helps improve ignition and flame stability. What it does:

• Provides the cap and burner base needed for a single 15K gas burner to contain and direct the flame
• Helps restore consistent heating across cookware and improves ignition performance when the original burner is damaged
• Addresses symptoms such as uneven flame, poor ignition, or visible burner damage
• Matches OEM burner geometry to maintain proper airflow and flame pattern

• One cap burner assembly (15K) — cap and burner base as shown

• Turn off gas supply and disconnect power to the appliance before servicing
• Replace only when the appliance is cool; follow the appliance manufacturer's disassembly instructions
• Verify correct burner alignment and secure fit before restoring gas and power
• If you smell gas or detect leaks after installation, shut off gas immediately.

This burner head is the gas-fired surface component that supports and directs the burner flame for cooking. It restores proper flame pattern for safer, more even heating on compatible gas ranges. What it does:

• Directs and shapes the gas flame so heat is applied evenly to cookware
• Helps maintain stable ignition and consistent burner operation
• Can reduce uneven cooking, weak flames, or burner flame distortion
• Works with the burner cap and base to form the complete surface burner assembly

• Turn off the gas supply and unplug the appliance before servicing
• Remove burner grate and cap, then lift the old burner head straight up to remove
• Seat the new burner head fully on the burner base and replace the cap and grate
• After reinstalling, check ignition and flame; if you detect gas odor or leaking, stop.