Need Help?
Call or text
Houses and secures your water filter for proper filtration. Replace if cracked, leaking, or filter won't seat correctly. Confirm fit with your model.
Replaced filter housing ,flushed water lines. Read more
Bypass cap replaces water filter when filtration isn't needed. Install when using RO system or preferring unfiltered water. Confirm fit with your model.
Water dispenser came down to a trickle and made a lot of noise, I changed the filter but it didnt help and thus the water tank/head assembly needed to be replaced. Replacing the water Tank/head assembly was an easy task, the hardest part is removing the covers and taking care of not breaking the insulation of the water inlet hose. For the not-so-experts like me it is also good to rememebr to have a bucket to collect all the water that comes out after the connection to the solenoid valves is... Read more
Secures water filter for proper filtration and flow to dispenser or ice maker. Replace if cracked, leaking, or filter won't seat properly. Verify fit.
Replaced the old housing with new water filter housing. Read more
Encloses the water filter to ensure proper flow and filtration. Replace if cracked, leaking when filter is removed, or causing water hammer. Confirm fit.
The video was very helpful, but my KitchenAid model required slightly more steps. Only the two screws in front held the filter housing, same as the video shows, but it has to be removed from the rear. My model did not have the wire brace, only the two front screws held the housing. Shut the water off and pull the electrical plug. Remove the two screws holding the filter housing in the front. Remove the lower panel in the rear at the bottom of the refrigerator. Remove the two screws holding the... Read more
Reduces contaminants like chlorine and lead for clean drinking water and ice. Replace every 6 months for optimal performance. Confirm fit with model.
Ordered a new one Read more
Holds the water filter and routes water to the dispenser and ice maker. Replace if cracked, leaking, or won't engage the filter. Confirm fit by model.
Replaced housing. That was simple but finding directions in how it I remove top of cabinet was time consuming. After two hours of searching I finally found one article that explained why there were no screws to remove. Read more
Houses and protects your refrigerator's water filter. Replace if cracked, leaking, or seals are worn to prevent water damage and maintain water quality.
Secures the water filter and maintains watertight seals to prevent leaks. Replace if cracked or leaking at tube connections to restore water flow.
It's bit of a chore in that on my Whirlpool Refrig you need to remove the grill on bottom front and the Utility Panel on bottom rear. Then unscrew the original filter housing and pull it out through the back of utility opening. Remove the two water hoses and put them into new filter house. Reverse the disassembly process to reinstall new filter housing. I'm old and slow so the process took me about 45 minutes. (Note: Unplug electric and turn off water inlet before starting.) Read more
This adapter tube assembly connects sections of the appliance's water line to create a secure, leak-resistant path for water flow. Replace it if the tube is cracked or the connection no longer seals properly to prevent leaks and restore flow.
Ordered a replacement valve and installed it. The part from AppliancePartsPro was an exact replacement for the original part. Replaced the hot and cold hoses at the same time to insure no leaks. Cold water settings now work properly again. Read more
Secures the filter cartridge and channels water through your refrigerator. Replace if cracked, leaking, or causing dispensing issues. Confirm fit by model.
Tried several new filters. Finally replacing housing fixed problem. Could not find any obvious defect in the housing, however, when pushing real hard on the filter door,water would flow.Seems to be some transfer valve inside housing body not properly actuated. Read more
Secures and seals your refrigerator's water filter. Replace if cracked, leaking, or filter won't seat properly. Confirm fit with your model number.
Changed out the water filter housing. Read more
Houses and secures your refrigerator's water filter for clean dispensed water. Replace if you experience leaks, improper filter fit, or vibration. Confirm fit with your model number.
Allows water flow to dispenser and ice maker when filter is removed. Replace if cracked, leaking, or broken during filter changes. Confirm fit with model.
Took the old one off -- Put the new one you sold me on! Read more
Usually ships within 4 - 14 days