Microwave Guard, Shield, Barrier Parts

This is a genuine replacement cover designed to protect internal components and restore the appliance's finished appearance. It provides a durable barrier that helps prevent dust, moisture, and accidental contact with internal parts. What it does:

• Covers and protects internal components behind the panel, maintaining appliance safety and appearance
• Helps prevent debris and moisture from reaching sensitive parts
• Restores a secure fit and alignment of the front/cabinet area
• Useful when the original cover is cracked, warped, or missing

• One replacement cover

• Disconnect power (and water, if applicable) before starting any repair
• Follow OEM service instructions for removal and reinstallation to avoid damaging adjacent components
• Use appropriate hand tools; avoid overtightening fasteners

This resin canopy is the interior ceiling cover inside the microwave cavity. It shields the stirrer area from grease and splatter to help maintain even heating and protect internal components for safer, more reliable cooking. What it does:

• Covers and protects the stirrer/waveguide opening at the top of the cavity
• Helps promote even microwave energy distribution for consistent cooking
• Shields internal parts from grease, steam, and food debris
• Replace if warped, cracked, burned, discolored, loose, or if you notice arcing/sparking inside the cavity

• 1 resin canopy

• Disconnect power before servicing; microwave components can carry high voltage
• Remove the old canopy by releasing tabs or fasteners from inside the cavity
• Clean the cavity roof and seating surfaces before installation
• Ensure the canopy is fully seated and do not operate the microwave without it installed

This lamp cover is the replacement lens that protects and diffuses your oven's interior light, restoring even illumination while keeping the bulb shielded from heat and food residue. It helps maintain safe, usable oven lighting. What it does:

• Protects the oven light bulb from splashes, crumbs and direct contact.
• Diffuses the bulb for more even interior illumination.
• Replaces a cracked, cloudy, melted or missing lens that can cause dim or exposed lighting.
• Fits over the lamp housing to restore the oven's normal light appearance and function.

• Disconnect power to the appliance before starting and allow the oven to cool completely.
• Handle the cover carefully—wear gloves to protect from sharp edges or broken glass.
• Remove any retaining screws or clips, swap the old cover for the new one, then secure the retainer.
• After installation, restore power and replace the bulb if issues persist.

This inlet cover protects and conceals the appliance's inlet area, keeping wiring and connections secure and helping prevent debris from entering. It restores a clean, safe inlet opening and supports proper component alignment. What it does:

• Shields the inlet opening and nearby connections from dust and debris
• Holds inlet components in position to reduce movement and wear
• Helps prevent snagging or accidental contact with inlet wiring or fittings
• Visible damage or a loose/misaligned cover can expose connections and lead to leaks or electrical issues

• One inlet cover

• Disconnect power and shut off water supply before beginning work
• Remove the appropriate access panel or trim to reach the inlet area
• Replace cover, securing with the original screws or clips; do not overtighten
• Inspect nearby gaskets, fittings and wiring while replacing the cover

The Microwave Cooktop Glass Cover is an essential component for maintaining the functionality and appearance of your microwave. This genuine OEM part ensures a perfect fit and durability, specifically designed for Samsung microwave models. The glass cover provides a smooth and stylish surface that protects your cooktop from spills, stains, and everyday wear. Easy to install, it restores your microwaveGÇÖs original look and performance without any hassle. The Microwave Cooktop Glass Cover not only enhances the aesthetic appeal of your appliance but also makes cleaning simpler, saving you time and effort in the kitchen. Whether your current cover is cracked, damaged, or missing, this genuine OEM part from Samsung guarantees reliability and seamless compatibility with your microwave. Invest in the Microwave Cooktop Glass Cover to ensure your appliance remains efficient and visually appealing, providing you with a better cooking experience every day.

Microwave Door Cover is the ideal replacement part for your Samsung microwave, helping to maintain its original look and functionality. This genuine OEM part is engineered to fit perfectly, ensuring a secure and lasting connection with your appliance. Made from high-quality materials, the door cap provides robust protection against daily use, preventing cracks and damage that can affect your microwave's performance. Installing the Microwave Door Cover is straightforward, allowing you to restore your microwaveGÇÖs appearance quickly and efficiently without the need for professional help. This part is compatible with a variety of Samsung microwave models, offering flexibility and assurance of a precise fit. By choosing this genuine OEM part, you ensure that your microwave continues to operate smoothly and safely, preserving its integrity and extending its lifespan. Whether the original door cap is worn out, broken, or missing, this Microwave Door Cover provides a reliable solution to keep your kitchen appliance looking and functioning like new. Enhance the durability and aesthetic of your microwave with this essential replacement part, designed to deliver both quality and peace of mind.

This outer door window glass replaces a cracked or cloudy viewing panel so you can safely monitor cooking without opening the door. Tempered glass matches OEM fit and restores a clear view through the appliance door. What it does:

• Provides a clear, protective viewing panel for the appliance door
• Restores safe visibility when original glass is cracked, chipped, or fogged
• Helps contain heat and splatter behind the door during operation
• Matches OEM shape for correct fit and secure mounting

• Handle with care; tempered glass can shatter if dropped or struck
• Disconnect power to the appliance before removing the door or any fasteners
• Follow OEM diagram for door disassembly and reassembly to avoid damage

This cover-damper is the replacement plastic cover that fits over the refrigerator air damper to help direct cold air between compartments for more consistent cooling. Replaces a cracked, broken or missing damper cover. What it does:

• Protects the damper assembly and helps channel airflow from the evaporator to the fresh-food and freezer compartments
• Restores proper air direction when a broken cover causes uneven temperatures or poor cooling
• Works with the damper to reduce drafts and improve compartment temperature balance
• Simple, passive part that mounts to the damper housing

• One cover-damper

• Disconnect power to the appliance before starting any repair
• Remove interior panels or shelves as needed to access the damper housing; handle plastic clips gently to avoid breakage
• Verify fit and orientation against the existing part before finalizing installation
• If the damper motor or actuator is damaged or the issue persists after installing this cover, inspect the full damper assembly

This LED light sheet is the refrigerator interior light assembly that provides even, long-lasting illumination so you can see inside the fresh food and freezer compartments. It replaces a failed or dim/fractured LED panel. What it does:

• Replaces the refrigerator's interior LED panel to restore consistent lighting
• Resolves symptoms such as no light, dim or flickering illumination, or visible damage to the light panel
• Provides a direct-fit LED sheet that mounts behind the interior lens or reflector
• Works with the refrigerator's existing wiring and connector

• Disconnect power to the appliance before beginning work to avoid shock
• Handle the LED sheet by the edges; avoid touching LEDs and circuit traces
• Use basic hand tools to remove the interior light cover and mounting screws; keep track of fasteners

A replacement control panel cover that restores the appliance's front console appearance and protects the underlying control assembly from spills and debris. Fits the OEM panel opening for a clean, factory look. What it does:

• Covers and protects the control console assembly from moisture, grease and everyday wear
• Keeps buttons, switches and display areas free from debris that can interfere with operation
• Restores the appliance's exterior appearance after damage or wear to the original trim
• Helps maintain proper airflow and spacing around control components

• One control panel cover (trim piece) as shown

• Designed for a direct fit; install with basic hand tools — disconnect power before starting
• Handle gently to avoid scratching the finish; align mounting tabs before securing
• Replace missing or damaged screws or clips with OEM-specified fasteners

The Microwave Cover Assembly is an essential component for maintaining the functionality and appearance of your microwave. Designed specifically for Samsung microwave models, this genuine OEM part ensures a perfect fit and seamless integration with your appliance. The COVER-MGT;MODULAR3,PP is crafted from high-quality materials, providing durability and long-lasting protection against everyday wear and tear. Installing this cover assembly helps to safeguard the internal components of your microwave, preventing dust and debris from entering and ensuring optimal performance. Additionally, the sleek design complements the overall look of your kitchen, maintaining the aesthetic appeal of your appliance. Choosing the Microwave Cover Assembly means you are investing in a reliable solution that restores your microwave's functionality and extends its lifespan. Whether you need to replace a damaged cover or upgrade your current setup, this genuine OEM part offers the perfect combination of quality and convenience for a hassle-free repair experience.

This motor cover protects and secures the appliance motor assembly, keeping wiring and components shielded from debris and wear. It restores the motor's protective housing for safer, quieter operation. What it does:

• Shields the motor and wiring from lint, dust, and foreign objects
• Helps maintain proper airflow and component alignment around the motor
• Replaces cracked, broken, or missing housings that leave the motor exposed
• Can reduce rattle or rubbing caused by a damaged motor cover

• Disconnect power to the appliance before beginning any work
• Remove access panels or panels obstructing the motor to reach the mounting location
• Align the cover over the motor and secure with the original fasteners
• Inspect wiring and nearby components while installing; ensure no wires are pinched or contacting moving parts