Parts for Ge EMO4000JBB01: 01 - Microwave Parts

This part is black in color.

Complete microwave door assembly in black. Replaces cracked, broken, or damaged doors. Includes glass and choke components for proper installation.

Replacement spring for microwave control panel keys. Installs behind keypad buttons to provide tactile response. Order if your spring is broken or missing.

Replace your microwave's door hinge pin if the original is broken, bent, or missing. This small rod secures the door hinge assembly for smooth operation.

Replacement wire lead for microwaves. Connects internal electrical components. Order a new lead if yours is damaged, frayed, burned, or corroded.

Clear glass lens cover for over-the-range microwave cooktop light. Shields bulb from grease and splatters. Replace if cracked, broken, or missing.

Replacement glass lens cover for microwave interior or cooktop lights. Protects bulb from food splatters. Needed when cracked, broken, or shattered.

Enclosure bracket for microwaves. Secures internal components to the enclosure frame. Replace if bent, cracked, or missing hardware mounting tabs.

Illuminates your microwave interior for monitoring food during cooking. Replace when bulb burns out or dims. Verify fit with your model number before ordering.

Holds the light bulb securely in your microwave for proper interior illumination. Replace if bulb won't stay in place, socket is burned or cracked.

The Turntable Coupler is an OEM part for GE microwaves. It connects the microwave's turntable motor to the glass tray, enabling the tray to rotate during cooking. This rotation ensures even heating and cooking of food items placed on the tray.

Causes of a bad turntable coupler can include regular wear and tear, physical damage from heavy or improperly placed items, or overheating due to prolonged use.

Symptoms of a bad turntable coupler include:

• Turntable not rotating
• Uneven heating or cooking of food
• Grinding or clicking noises during operation
• The coupler being visibly damaged or worn

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Secures and organizes internal wiring in your microwave. Replace if wires are loose, rattling, or damaged clip causes arcing. Verify fit with your model number.

Turntable stopped turning or making grinding noise? This motor rotates the glass plate for even cooking. Easy 5-10 minute DIY fix with basic tools.

Fixes loud grinding or coffee grinder noise from microwave. Simple DIY repair with 2 screws and wire connectors. Located on top, typically takes under 30 minutes.

Flange nut for microwave magnetron mounting. Replace this hex nut if stripped, missing, or damaged during magnetron removal or appliance maintenance.

Replaces cracked, warped, or damaged upper exhaust duct in your microwave. Directs airflow between vent area and exterior exhaust system for proper ventilation.

Replace your microwave's halogen light bulb when interior lighting dims or fails. Restores visibility for monitoring cooking. Verify fit with your model.

Protective cover for your microwave's interior halogen lamp. Replace if cracked, broken, or missing to shield the bulb and maintain safe operation.

Microwave displays sensor error or won't heat? This flame sensor detects burner flames for safe operation. Fixes sensor errors and heating failures.

Wire harness for microwaves. Connects electrical components inside the unit. Replace if wires are damaged, frayed, or connections are loose or broken.

Secures the temperature sensor in your microwave. Replace if sensor is loose, misaligned, or causing erratic heating. Confirm fit with your model number.

Microwave not heating? The magnetron generates microwave energy for cooking. Common repair when unit runs but won't heat food. Moderate DIY difficulty.

Air guide assembly for microwaves. Directs airflow through the vent system. Replace if cracked, broken, or missing to restore proper ventilation.

Replacement door latch lever bracket for microwaves. Installs behind the control panel to hold interlock switches. Needed when bracket is cracked or broken.

Microwave won't stop running or starts when door closes? A faulty door switch is likely the cause. This safety switch is a 45-minute DIY fix.

Microwave won't start or heat but light works and timer counts down? A faulty monitor switch is often the cause. DIY repair typically under 30 minutes.

Wire harness assembly for microwaves. Connects door switches to control board. Replace if wires are discolored, frayed, damaged, or showing poor connection.

Fixes microwaves with motors that start slowly or make abnormal noise. This run capacitor stores electrical energy to help motors start and run smoothly.

Microwave won't turn on or is completely dead? A blown fuse is often the cause. This safety fuse protects against power surges. Easy 5-minute DIY fix.

Fix a microwave that won't heat or hums but doesn't start. This capacitor stores energy for the high-voltage circuit. Moderate DIY repair, 30-60 minutes.

Microwave not heating or humming loudly? The high-voltage diode converts AC to DC for the magnetron. Repair takes 30-45 minutes with basic tools.

Rear exhaust duct assembly channels airflow at the back of your microwave. Replace if cracked, rusted, or damaged to restore proper ventilation routing.

Base plate assembly for microwave ovens. Structural support component that installs at the bottom of the unit. Replace if cracked, damaged, or warped.

Fix a microwave with no power or intermittent shutoffs. This thermostat monitors temperature and protects internal components. DIY repair in 20 minutes.

This wire harness connects refrigerator electrical components to restore reliable power and signal routing. Replaces a damaged or frayed harness to help stop intermittent operation and restore proper control and accessory function. What it does:

• Routes power and signaling between the control board and components such as lights, fans, or heaters
• Replaces broken, melted, or corroded wires that cause intermittent power or component failures
• Helps resolve symptoms like lights flickering, fans not running, or inconsistent dispenser/ice behavior when wiring is at fault
• Provides factory-style connectors and length to match original wiring layout for a clean replacement

• One wire harness

• Disconnect power to the appliance before starting—shock hazard if service is attempted with power on
• Match connector shapes and wire colors to the original harness before unplugging to ensure correct reassembly
• Use basic hand tools and avoid excessive force on plastic connectors; replace any damaged clips or fasteners

Replace your microwave's power cord assembly if damaged, frayed, or missing. Connects the unit to your wall outlet for safe electrical operation.

Outer door panel for microwaves. Replaces cracked, dented, or damaged exterior panel that affects appearance. Cosmetic component for door assembly.

Secures the power cord to your microwave's chassis. Replace this bracket if it's cracked, broken, or missing to properly mount and support the cord.

Secures microwave to wall cabinet mounting bracket. Replace if cracked, stripped, or missing to restore proper cabinet installation and stability.

Upper duct bracket assembly for over-the-range microwaves. Secures ventilation ductwork to the cabinet. Replace if bent, broken, or missing hardware.

Color: brown. Measures about 9 inches in diameter.

Replacement glass turntable tray for microwaves. Rotates during cooking to heat food evenly. Order a new tray if yours is cracked, chipped, or broken.

Traps grease and particles from ventilation air in your microwave. Replace when clogged or damaged for optimal performance. Verify fit with model number.

Charcoal filter removes grease and cooking odors in over-the-range microwaves. Replace when clogged or after 6 months. Verify fit by model number.

Controls exhaust airflow in over-the-range microwaves. Replaces bent, damaged, or missing damper assemblies for proper external venting installation.

Hardware bag includes screws, nuts, and washers for microwave installation and assembly. Replace missing or stripped fasteners during repairs or reinstalls.