Microwave Tray & Related

This rotating ring assembly sits beneath the microwave glass tray and lets it glide smoothly for even heating. Replacing a worn ring restores stable turntable rotation and helps reduce wobbling or scraping noises during cooking.

• Supports the glass tray and allows it to rotate on low-friction rollers
• Promotes more even heating by enabling consistent turntable motion
• Addresses issues such as a cracked/warped ring or seized/missing rollers
• Typical symptoms include: tray not turning, binding, wobbling, or grinding/clicking sounds

• Disconnect power to the microwave before servicing
• Remove the glass tray, lift out the old ring, and wipe the turntable track
• Position the new ring on the track; reseat the tray on the center coupler and rollers
• Test with a microwave-safe cup of water to ensure smooth rotation; never operate empty

Turntable shaft that connects the microwave motor to the glass tray so the turntable rotates smoothly for more even heating. Replacing a worn or broken shaft helps stop wobbling, slipping, or scraping during rotation. What it does:

• Transfers rotation from the motor to the glass turntable so dishes rotate while cooking.
• Centers and supports the glass tray to reduce wobble and ensure consistent rotation.
• Use when the tray won't turn, slips on the motor coupler, or makes knocking/scraping noises.
• Fits into the turntable coupler and works with the roller ring and glass tray to maintain stable motion.

• 1 turntable shaft

• Disconnect power before servicing and remove the glass tray and roller ring to access the shaft.
• Shaft typically presses into the motor coupler; remove the old shaft and press the replacement into place.
• Inspect the roller ring and glass tray for damage when replacing the shaft; replace any worn pieces for best results.

This auxiliary cooktop holder is a replacement support bracket that helps keep the cooktop or burner assembly aligned and secure for stable, rattle-free operation. Restores proper positioning of components after wear or damage. What it does

• Supports and anchors the cooktop/burner assembly to prevent shifting during use
• Keeps burner and trim pieces aligned for even surface contact and safe operation
• Reduces rattling, vibration, and gaps between cooktop components
• Helps restore secure mounting after broken or worn original brackets

• Disconnect power (and gas, if applicable) before starting any repair
• Use proper hand tools; part secures with fasteners—retain and reinstall all screws
• Watch for sharp sheet-metal edges and wear safety gloves and eye protection

This glass tray replaces a damaged or missing microwave turntable to restore even heating and a stable surface for plates and bowls. Durable tempered glass resists heat and supports cookware during operation. What it does:

• Provides a flat, stable surface for food containers to rotate on while the microwave runs
• Helps promote more even cooking by allowing the turntable to rotate properly
• Replaces cracked, chipped, or missing glass trays that can cause wobble or uneven heating
• Fits on the central drive hub and works with the microwave's turntable support system

• One tempered glass turntable tray (single piece)

• Wear gloves and handle glass carefully to avoid cuts; inspect for chips before use
• Ensure the microwave is unplugged or power is off before removing or installing parts
• Set the tray onto the turntable support and verify it seats securely on the drive hub
• Check the turntable support and drive coupler for damage if the tray does not sit level or rotates unevenly.

This flat metal tray is a replacement nonstick oven tray that gives you a flat cooking or drip surface for baking and roasting. It restores a level surface for pans and helps contain spills for easier cleanup. What it does:

• Provides a flat, rigid surface for baking, roasting, or catching drips beneath racks
• Restores proper fit when original tray is bent, warped, or missing
• Helps reduce food contact with oven floor and collects spills to prevent messes
• Nonstick finish eases cleanup when coating remains intact

• Install on the oven rack or support as shown in your owner's manual; ensure it sits flat before heating
• Allow tray to cool before handling to avoid burns
• Do not use abrasive pads or metal utensils on the nonstick surface to avoid damaging the coating
• Inspect coating for chips or flaking; replace if coating is compromised to avoid contamination

This coupling connects the washer drive motor to the transmission to transfer power for agitation and spinning. Replacing a worn or broken coupling restores reliable drive engagement and reduces noise and slipping. What it does:

• Transfers motor rotation to the transmission so the drum agitates and spins
• Prevents metal-on-metal contact between motor and gearbox when intact
• Common symptom: washer won't agitate or spin, or slips under load
• Common symptom: loud grinding or clunking noises from the washer during cycle

• One coupling

• Disconnect power and water before servicing; follow the manufacturer's disconnection procedures
• Access may require removing the washer cabinet or front panel—refer to your model's service manual
• Inspect adjacent parts (motor mounts, shaft splines) for wear and replace as needed

This replacement tray restores a damaged or worn internal tray to help contain spills and stabilize components for reliable appliance operation. It provides a like-for-like fit where the original tray is cracked, warped or missing. What it does:

• Holds and contains water, ice melt, or minor spills to protect interior cabinet surfaces
• Supports nearby components and helps maintain proper alignment
• Prevents leaks from spreading and reduces risk of odors or corrosion
• Replaces trays that are cracked, warped, broken or otherwise damaged

• One replacement tray

• Turn off power to the appliance before attempting service
• Remove nearby shelving or panels to access and remove the old tray; use gentle prying if needed
• Inspect surrounding seals and components and replace any damaged parts to prevent future leaks

This nonstick tray-grille pan is the oven broiler pan used to catch drippings and hold food for broiling, grilling and roasting. The durable nonstick finish helps reduce sticking and makes cleanup easier. What it does:

• Holds food during broiling and grilling to promote even exposure to heat
• Catches grease and drippings to help reduce smoke and oven mess
• Designed to work with the oven's broiler system for high-heat cooking tasks
• Nonstick surface helps prevent food from adhering and simplifies cleanup

• One nonstick tray-grille pan

• Make sure the oven is completely cool and power is off before handling or installing parts
• Slide the pan onto the broiler support or oven rack in the same orientation as the original part
• Use oven mitts or gloves when removing the pan after cooking; let it cool before cleaning
• Clean with a soft sponge and mild detergent to preserve the nonstick finish; avoid abrasive pads

This glass tray is a flat oven shelf that provides a smooth, easy-to-clean surface for baking and roasting. It restores a stable cooking surface and replaces cracked, chipped, or otherwise damaged oven glass trays. What it does:

• Supports bakeware and cookware for even heating on the oven floor or shelf area
• Replaces trays that are cracked, chipped, or shattered and may cause uneven cooking
• Provides a smooth, non-porous surface that's simple to wipe clean
• Helps prevent food drips from contacting the oven floor when used as intended

• One glass tray

• Handle carefully; glass can break and cause injury—wear cut-resistant gloves
• Allow the oven to cool completely before removing or installing the tray
• Inspect tray for chips or stress cracks before first use; do not use if damaged
• Follow the appliance manufacturer's instructions for placement and safe use

This replacement drive coupler connects the motor to the washer's drivetrain to restore normal agitation and spinning. Use it when the machine fails to drive or slips during cycles. What it does

• Transfers motor torque to the transmission/drive assembly so the tub can agitate and spin
• Commonly fitted when a worn or broken coupler causes no-spin or no-agitate symptoms
• Replaces a damaged or degraded plastic/rubber coupling that can crack or shear
• Helps stop slipping, unusually loud drive noises, or intermittent drive failures

• Disconnect power and water before any service; follow OEM safety precautions
• Basic hand tools are typically required; your model's service manual for disassembly steps
• Inspect the motor shaft and transmission input for damage when replacing the coupler
• If other drive components are damaged, replace them as recommended by the OEM

The Microwave Turntable Holder Rack is the ideal replacement part to keep your Samsung microwave functioning perfectly. Designed specifically for Samsung microwave models, this holder rack ensures a secure fit and seamless operation. As a genuine OEM part, it guarantees the highest quality and compatibility, matching the original specifications of your appliance. The holder rack effectively supports the turntable, allowing it to rotate smoothly and evenly, which promotes consistent heating and cooking results. Its durable construction ensures long-lasting performance, reducing the need for frequent replacements and providing reliable support for your microwave turntable. Installing the Microwave Turntable Holder Rack is straightforward, enabling you to restore your microwaveGÇÖs functionality quickly and easily. Whether your current holder rack is damaged, missing, or simply worn out, this genuine OEM part offers a dependable solution to maintain the efficiency and convenience of your Samsung microwave. Enhance your cooking experience by ensuring your microwave operates as intended with this essential holder rack.

The Microwave Cooking Tray is an essential component for maintaining your microwave's performance. Designed specifically for Samsung microwave models, this genuine OEM part ensures a perfect fit and reliable functionality. Crafted from high-quality materials, the tray provides a sturdy surface that supports even cooking and heating, enhancing your overall cooking experience. Its durable construction helps prevent warping and cracking, extending the life of your appliance. Installing the Microwave Cooking Tray is simple and straightforward, allowing you to quickly replace a damaged or worn-out tray without any hassle. By using this genuine OEM part, you ensure optimal heat distribution and prevent food from sticking, making your meals easier to prepare and clean up. Whether your current tray is cracked, broken, or no longer performs as needed, the Microwave Cooking Tray is the perfect solution to restore your microwave's efficiency and reliability. Trust in this genuine OEM part to keep your Samsung microwave functioning smoothly and effectively.

The Microwave Rack Wire is designed to fit seamlessly into your Samsung microwave, providing a sturdy and reliable support for your cooking needs. This genuine OEM part ensures compatibility with a range of Samsung microwave models, guaranteeing a secure fit and optimal performance. Crafted from high-quality materials, the rack wire offers durability and stability, allowing you to safely place dishes, trays, and other cookware without worry. Installing the Microwave Rack Wire is straightforward, helping you restore your microwave's functionality quickly and efficiently. Whether your original rack wire is bent, broken, or missing, this genuine OEM part is the perfect solution to maintain the performance and safety of your appliance. Enhance your microwave experience with the dependable and precise design of the Microwave Rack Wire, ensuring your kitchen remains functional and convenient.

Microwave Wire Rack Assembly is the perfect replacement part to keep your Samsung microwave functioning smoothly. This genuine OEM part ensures a precise fit and reliable performance, maintaining the quality you expect from your appliance. The sturdy wire construction provides excellent support for your dishes and containers, preventing spills and enhancing cooking efficiency. With this assembly, you can easily organize your microwave space, making it more convenient to access your cookware. Installation is straightforward, allowing you to restore your microwave's functionality without hassle. The Microwave Wire Rack Assembly is compatible with various Samsung microwave models, ensuring versatility and ease of use. By choosing this genuine OEM part, you guarantee the longevity and safety of your microwave, avoiding potential issues caused by inferior replacements. Whether your original rack is bent, broken, or missing, the Microwave Wire Rack Assembly offers a seamless solution to maintain your kitchen's efficiency and reliability. Invest in this high-quality part to enhance your microwave experience and keep your kitchen running smoothly.

This cooking tray is the oven broiler/drip pan that catches drips and holds food while broiling, helping keep the oven interior cleaner and making broiling tasks easier. It provides a stable surface for broiling and roasting. What it does:

• Catches grease, juices and food debris to help prevent spills and reduce smoking
• Supports pans or food under the broiler for even browning and crisping
• Helps contain messes for easier cleanup after cooking
• Restores proper fit and function when the original tray is damaged or warped

• One cooking tray

• Install on the broiler rack or designated support slots; ensure tray sits flat and secure before use
• Allow the oven to fully cool before removing or installing the tray to avoid burns
• Clean with warm, soapy water and avoid abrasive cleaners that can damage the finish
• Inspect regularly for heavy warping or damage; replace if it no longer fits securely