Microwave Tray & Related

This support is a factory mounting piece that secures and aligns its mating component inside the appliance. Replacing a worn or broken support restores proper fit, stability, and smooth operation of the associated assembly.

• Provides structural support and accurate positioning for the designated part
• Helps prevent sagging, looseness, and vibration
• Maintains alignment so components latch/seat correctly
• Typical failure signs: cracked or missing support, rattling, misalignment, or parts that won't stay in place

• Disconnect power before servicing; also shut off the water supply
• Note the original orientation; transfer any screws, clips, or spacers from the old support
• Install without overtightening to avoid damage; secure fit of the supported component after installation

The Coupler is an OEM part for Frigidaire microwaves. It is responsible for providing a secure connection between the motor and the glass tray.  It enables the smooth rotation of the glass tray turntable, ensuring even heat distribution during the cooking process.

A bad coupler can occur due to wear and tear over time, accidental damage, or improper handling. Signs of a faulty coupler include the glass tray not rotating or turning unevenly during operation.

Symptoms of a bad coupler include:

• The glass tray not rotating 
• Uneven heating  
• Unusual noises  

Replace your faulty microwave glass tray turntable coupler with this genuine OEM Frigidaire part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Shelf Support is an OEM part for Frigidaire countertop microwaves. It holds and stabilizes shelving inside the microwave cavity during operation. 

Symptoms of a faulty shelf support include:

• Loose or detached shelves that cannot maintain placement  
• Difficulty positioning shelves at desired height levels
• Scrapes or dents on interior microwave walls from shelf movement
• Gaps or spaces where shelf legs do not sit securely  

Causes relate to typical wear of spring clips or brackets holding shelves in place. Regular vibration from microwave turntables can weaken pressure points over time.

This OEM replacement shelf is compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Shaft assembly that transfers rotational force from the motor to the appliance's rotating component, restoring smooth, aligned rotation and helping reduce noise and vibration caused by worn or damaged shaft parts. What it does:

• Transfers motor rotation to the appliance's rotating component (drum, basket or agitator depending on model)
• Restores proper alignment to reduce wobble and vibration during operation
• Helps stop grinding, scraping or loud knocking that can occur when a shaft is worn or damaged
• Works with existing bearings/bushings to maintain smooth rotation

• Always disconnect power at the breaker before removing panels or working on the appliance; if the appliance uses gas, shut off the gas supply as required.
• Follow the appliance service manual for disassembly order and correct shaft orientation during installation.
• Inspect related bearings, bushings, seals and fasteners; replace any worn components to prevent premature failure.

This glass turntable tray replaces a damaged or missing tray in your microwave. It provides a stable, heat-resistant surface that rotates to promote even heating and helps prevent dishes from tipping or wobbling during cooking.

• Provides the flat, heat-resistant surface that holds plates and bowls
• Interfaces with the center drive coupler and rides on the roller ring/turntable support to rotate for even heating
• Common symptoms: cracked or broken glass, tray wobbles or slips, won't seat or rotate smoothly, clicking/grinding while turning
• Replace if the center hub area is worn or if the original tray is missing

• Allow the oven to cool; open the door and lift out the old tray. Clean the roller ring/turntable support and cavity floor
• Ensure the roller ring/turntable support is seated correctly
• Align the tray's molded drive slots with the center coupler and set the tray flat on the ring
• Test rotation with a microwave-safe cup of water; do not operate the microwave without the tray and support in place

The Cooking Tray is an OEM part for Bosch microwaves. As the centerpiece of the microwave, the cooking tray ensures even cooking by rotating food items during the cooking cycle. It supports dishes and rotates continuously to evenly distribute microwave energy throughout recipes.

Causes of a bad cooking tray can include wear and tear due to extended use over time. Food splatter or spills left inside the microwave may damage or corrode the tray. Accidental dropping or cracking of heavier dishes placed on the tray can also cause issues.

Symptoms of a bad cooking tray include:

• The tray not spinning or rotating properly during cooking
• Unevenly or partially cooked food
• Loud grinding or scraping noises coming from the tray
• Cracks or breaks visible in the plastic surface

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Color: gray. Measures about 3 inches in diameter.

This factory support stabilizes and positions its mating assembly so it stays secure and aligned during use. Replacing a worn or broken support helps restore proper fit and prevents looseness or shifting that can affect performance. What it does

• Provides structural support and correct positioning for the related assembly
• Helps prevent wobble, sagging, rattling, or misalignment
• Typical failure signs: visible cracks, broken/missing tabs, or a loose fit
• Can help resolve components not staying in place or moving unexpectedly

• 1 support

• Disconnect power to the appliance before servicing
• Access the support location and note the original orientation
• Transfer and reuse any original mounting hardware your model uses
• Seat the new support fully and verify a secure fit before restoring power

The Microwave Roller Guide Assembly is an essential component for maintaining the smooth operation of your microwave. This genuine OEM part ensures compatibility with a wide range of Samsung microwave models, providing reliable performance and durability. The Roller Guide Assembly is designed to facilitate the effortless movement of trays or turntables, preventing jams and ensuring consistent rotation during use. Its high-quality construction guarantees long-lasting functionality, allowing you to restore your microwave's performance without the need for expensive replacements. Installation is straightforward, making it an ideal choice for DIY repairs and saving you time and money. By replacing a worn or damaged roller guide, you can enhance the efficiency of your microwave, ensuring even heating and a better cooking experience. The Microwave Roller Guide Assembly not only improves the functionality of your appliance but also extends its lifespan, making it a practical and cost-effective solution for keeping your kitchen equipment in top condition.

Guide roller assembly that restores smooth, stable movement for a sliding rack or appliance drawer. Replaces worn or broken rollers to reduce sticking, grinding, or misalignment during use. What it does:

• Guides a sliding rack/drawer so it opens and closes evenly without binding
• Helps stop noisy or jerky movement caused by damaged or worn rollers
• Restores proper alignment to prevent racks from slipping or dropping
• Used where a roller rides along a track or guide to support smooth travel

• Disconnect power (and gas, if applicable) and remove any loose items from the appliance before beginning.
• Remove the affected rack/drawer or access panel to reach the guide; keep mounting hardware for reuse unless damaged.
• Align the guide and reinstall hardware securely; test the rack/drawer movement before completing reassembly.
• If mounting clips or brackets are broken, replace those parts as needed for a secure fit.

This removable wire rack fits microwaves designed for rack use, creating a second cooking level. Replacing a missing, bent, or chipped rack restores safe operation and the intended capacity for multi-item reheating and cooking.

• Provides a stable second-level surface for cooking or reheating multiple items in compatible models
• Positions dishes at the proper height for rack-enabled functions
• Replace if missing, bent, rusted, or if damaged coating causes arcing/sparking
• Use only in microwaves designed for a rack; follow your Use & Care manual

• Disconnect power before servicing; allow the cavity to cool
• Insert the rack into the designated side-wall supports; ensure it is level and not touching cavity walls or the turntable
• Remove the rack for cycles that require single-level cooking if instructed by your manual
• Stop use if arcing occurs; inspect placement and rack condition before resuming

Rotating ring assembly supports the drum's rotating interface to maintain smooth, stable rotation. Replacing a worn or damaged ring reduces noise, vibration and scraping for quieter, more reliable operation. What it does:

• Holds and aligns the drum's rotating surface so the drum spins smoothly and evenly.
• Prevents metal-on-metal contact between the drum and cabinet or shaft.
• Worn or damaged rings can cause rubbing, grinding, squealing or excessive vibration.
• Restoring the ring can improve drum tracking and reduce noise during spin cycles.

• Disconnect power (and gas if applicable) before beginning any repair.
• Support the drum during removal to prevent it from shifting; follow the model's service diagram for correct disassembly.
• Inspect neighboring parts (rear drum bearing, glides, seals) for wear and replace as needed.

Replacement refrigerator shelf that restores usable storage space and support for food and containers. Helps keep items organized, prevents spills, and returns a stable surface after a cracked, chipped, or missing shelf. What it does:

• Provides a flat, supportive surface for storing food, containers and small appliances
• Replaces cracked, chipped or missing shelving to restore usable interior space
• Helps reduce spills and keeps items from shifting when the door is opened or closed
• Seats into the refrigerator's existing shelf supports to re-establish stable storage

• Remove the old shelf per your owner's manual by lifting or sliding it out of the shelf supports
• Handle carefully; wear cut-resistant gloves if replacing a cracked or broken glass shelf
• Place the replacement shelf into the same supports—do not force or bend the shelf

This metal tray sits inside the oven cavity to support food or cookware during cooking cycles. Replacing a warped, damaged, or missing tray restores a stable surface and helps maintain consistent, reliable cooking performance.

• Provides a flat, durable platform for placing food or cookware
• Seats on the designed supports/locator features inside the cavity for proper fit
• Replace if bent, warped, rusted, or otherwise damaged
• Common symptoms: missing tray, items wobble or sit unevenly, poor fit, visible damage

• Disconnect power and allow the appliance to cool completely before replacing internal accessories
• Remove the old tray and clean the support area; align and seat the new tray per your owner's manual
• Use only in the modes and configurations specified for your model
• Do not force the tray; ensure it is fully and evenly seated before use

This rotating ring assembly sits beneath the microwave glass tray and lets it glide smoothly for even heating. Replacing a worn ring restores stable turntable rotation and helps reduce wobbling or scraping noises during cooking.

• Supports the glass tray and allows it to rotate on low-friction rollers
• Promotes more even heating by enabling consistent turntable motion
• Addresses issues such as a cracked/warped ring or seized/missing rollers
• Typical symptoms include: tray not turning, binding, wobbling, or grinding/clicking sounds

• Disconnect power to the microwave before servicing
• Remove the glass tray, lift out the old ring, and wipe the turntable track
• Position the new ring on the track; reseat the tray on the center coupler and rollers
• Test with a microwave-safe cup of water to ensure smooth rotation; never operate empty