Mtd Control Cable

This OEM quality control cable is designed to be used with walk-behind lawnmowers to stop the blade if the control handle is released. If the cable is damaged or broken, it will not release the brake when the lever is pressed. This is a safety feature to ensure the user can easily stop the mower by releasing the lever. The control cable has delicate end connections that can wear out through normal use. If this happens, the lawnmower may malfunction, and the component should be replaced.If a visual inspection of the control cable shows wear or a break, it will need to be replaced. There are no tools required for the process. A set of work gloves can be useful. Take the original control cable and untwist it so it can be removed from the lawnmower. The new control cable can be pushed into place.This control cable is an authentic replacement part directly sourced from the manufacturer and sold as an individual unit. The cable is made for use with lawnmowers manufactured by Ryobi, Yard Machines, MTD, Yard-Man, and Bolens.

This is a throttle lever that is used in many types of lawn and garden equipment. It is one of the components in the throttle assembly. The purpose of the throttle lever is to stop the engine whenever the user moves the lever into the full choke position. Sometimes, wear and tear or damage can cause issues with the throttle lever. If the lever is broken, it may not be possible to move the component, and it will need to be replaced. Excessive dirt and debris can also cause issues with the throttle lever. If the throttle lever needs to be replaced, pliers and a screwdriver will be needed for the process. The first step is to remove the throttle assembly and the cable attachment on the clutch. Take the cable out of the throttle lever before removing the lever itself. The new component can be installed in the same position before reassembling the tool.This throttle lever is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The lever is made for use with edgers and lawnmowers manufactured by Bolens, Cub Cadet, Huskee, MTD, and Yard Machines.

This part is a replacement drive cable. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It can be used to replace a broken or malfunctioning drive cable in a variety of different lawnmower models.The drive cable is important for proper equipment control, as it stops the engine when the operator presence handle is released. Over time, drive cables can become stretched, worn, broken, or detached, which can be dangerous and thus they should be immediately replaced. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this drive cable, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this drive cable is suitable for use on several different models of lawnmowers manufactured by MTD, Yard Man, Yard Machines, Troy-Bilt, and Husky. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This control cable is a genuine MTD part, sold individually. This control cable can be used as a replacement part in a string trimmer. The purpose of the control cable in a string trimmer is to allow the operator of the appliance to propel the appliance forward or stop the appliance by engaging or disengaging the cable.The control cable could be frayed, dented, warped, ripped, torn, or eroded, and if this occurs to the point at which the control cable cannot control the motion of the appliance, the control cable should be removed and replaced by this genuine OEM replacement part for continued safe use of the string trimmer. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This control cable is compatible with the following outdoor appliance brands: MTD and Cub Cadet.

The snowblower auger cable initiates operation of the snowblower’s auger similar to the cable on the handle of a push mower. To start the snowblower, the control handle must be squeezed. This engages the snowblower auger cable to allow the auger to begin turning. When the snowblower auger cable is broken, the snowblower cannot work because the auger will not turn. The length of this snowblower auger cable is 47.48 inches. It is made from high-quality rubber insulation of a metal wire. A pair of pliers and a wrench are needed to complete the repair. If the snowblower still does not work after replacing the snowblower auger cable, check the shear pin as these are prone to breaking and will also prevent the auger from turning. This genuine OEM snowblower auger cable is compatible with snowblowers manufactured by Craftsman, Cub Cadet, Husky, MTD, Troy-Bilt, Yard Machines, and Yard-Man. This part is sold individually. You will need to order any hardware, housing, and the trigger separately if these items also need repair or replacement.

This part is a speed select cable. This is a genuine OEM part and has been sourced directly from the manufacturer. This part is intended to replace a deteriorated, damaged, or detached speed select cable on certain snowblower models. The speed select cable works by fastening the ground drive system to the speed control level. This enables the equipment operator to properly control speed and traction while using a snowblower. Over time, speed select cables can experience wear and tear which can cause them to break or become detached, requiring replacement. Without a functioning speed select cable, the snow blower will not be able to be properly controlled. For accurate information on how and where to install this replacement speed select cable, specific manufacturer diagrams should be referenced. Proper safety measures should always be followed when working on any type of equipment.As an authentic replacement part, this speed select cable can be used on multiple different models of Craftsman, MTD, Yard-Man, and Huskee snow blowers. Please note that this speed select cable is a genuine part made of high-quality materials and is sold individually.

This drive cable is made up of a metal cable housed by a flexible plastic casing. It connects the drive control in the handle of the snowblower engine. This ensures the equipment starts and stops when a person wants it to. If the cable is damaged or broken, the snowblower will not work properly even when the control handle has been released.If the equipment isn't stopping or doesn't start when it should, the drive cable could be causing the problem. It will need to be replaced for the snowblower to work properly. Before making the replacement, the spark plug wire should be removed. Next, release the cables in the handle. The drive cover should be removed before taking out the drive cable. Replace this with a new drive cable and reassemble the snowblower before using it.This is a genuine OEM replacement drive cable that is sourced directly from the manufacturer. It is sold as an individual part. These cables are made to fit snowblowers created by MTD, Craftsman, and Yard Machines.

This genuine MTD speed selector cable attaches the speed control lever to the snowblower's ground drive system to regulate and maintain the speed of the snowblower.Though speed selector cables are highly durable, they can be subject to damage as a result of exposure to inclement weather, impact upon collision, and general decline. Signs of a damaged speed selector cable can include malfunctioning regulation of speed, an overheating engine, or black smoke rising from the engine. If any of these symptoms occur, the speed selector cable should be checked and replaced immediately, as the snowblower cannot function properly without it. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This speed selector cable is compatible with the following brands: MTD, Troy-Bilt, Cub Cadet, Yard Machines, and Craftsman. Part sold individually.