Mtd Control Cable

This genuine MTD speed selector cable attaches the speed control lever to the snowblower's ground drive system to regulate and maintain the speed of the snowblower.Though speed selector cables are highly durable, they can be subject to damage as a result of exposure to inclement weather, impact upon collision, and general decline. Signs of a damaged speed selector cable can include malfunctioning regulation of speed, an overheating engine, or black smoke rising from the engine. If any of these symptoms occur, the speed selector cable should be checked and replaced immediately, as the snowblower cannot function properly without it. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This speed selector cable is compatible with the following brands: MTD, Troy-Bilt, Cub Cadet, Yard Machines, and Craftsman. Part sold individually.

Snowblowers are an essential bit of machinery for those who live in areas with heavy winter weather. The machines use an auger to turn and pull snow into the impeller assembly. The machines are typically self-propelled and must be put into gear to begin moving forward. This is done through a drive system that relies on a control lever and clutch cable that triggers the auger or wheels to turn. When that clutch cable is broken, the machine will not function. This replacement clutch cable is designed for snowblowers made by Craftsman, MTD, and other brands. It works with track, drive or traditional machines. This is an OEM replacement part that will require a nut driver for installation. It ships individually but includes all hardware necessary for a safe and effective installation.

The drive clutch cable is a clutch or engagement cable that tightens the drive belt or lifts the spinning friction disc contained within the drive housing. It will cause contact between the driveshaft and turn the wheels. If the wheels refuse to turn, it may be due to a cable that is damaged, loose, or snapped. If tightening the tension fails to yield results, this OEM replacement cable is needed. Replacing a drive clutch cable is fairly easy. Remove the original and use pliers and a socket set to install and tighten the new one. "This is a drive clutch cable designed for use in snowblowers produced by MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, Yard-Man, and others. It ships individually and is made of rubber, wire, and metal.

This replacement part is drive cable intended for use in lawn equipment. This is a genuine replacement part made by MTD. Drive cables turn on the appliance. The user is able to use the drive cable to start the lawn mower and complete a job. The cable drive is important as it ensures that the machine is able to be turned off and shut down. A new drive cable might be needed if the user is not able to turn on the appliance. If the cable is damaged in any way it will also need to be replaced. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by MTD.

This part is a height adjustment cable that is used on lawnmowers. The height adjustment cable allows the lawnmower operator to adjust the height of the control bar to match his or her height.A new height adjustment cable will be needed if the original is no longer allowing the operator to adjust the height. If any portion of the height adjustment cable is cracked, broken, or damaged in any way, it will need to be replaced if the height of the control bar needs to be changed. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This height adjustment cable is a genuine MTD part. It is sold individually. This particular height adjustment cable is compatible with lawnmowers that are manufactured by MTD.

This replacement part is a clutch auger cable. It connects the handle controls to the equipment's motor, which allows the user to control the speed and power of the snowblower.Over time, the auger cable's wires could snap, necessitating replacement.This is a genuine OEM replacement part manufactured by MTD for use in snowblowers and snow throwers. This part is sold individually.

This is a drive cable that is used in many models of snowblowers from top manufacturers. It is composed of a metal cable that is inserted into a flexible plastic housing. The purpose of the drive cable is to connect the drive control located in the snowblower engine handle. It makes sure that the snowblower starts and stops when the controls are used. If the drive cable is broken or becomes damaged, the snowblower will not work correctly even if the control handle is released.If a snowblower isn't starting or stopping when expected, the drive cable is likely the source of the problem. The part needs to be replaced before the snowblower can be used again. Disconnect the spark plug wire before releasing the handle cables and removing the drive cover. Replace the drive cable and reassemble the other parts.This is an authentic OEM replacement drive cable that is sourced directly from the manufacturer. It is sold as an individual component. The drive cable is designed to be compatible with snowblowers manufactured by Yard-Man, Huskee, MTD, Yard Machines, Troy-Bilt, Cub Cadet, and Craftsman.

The clutch cable is a vital part of the snowblower, as it connects the control lever to the clutch in the machine's drive system. The cable is what allows the user to control the clutch. If the clutch cable is bad, it means the user will not have control over the clutch. The snowblower clutch cable could become corroded, or part of it could break in some cases. Regardless of what causes problems in the cable, it will need to be replaced before the snowblower will work properly. The authentic OEM replacement clutch cable is sold individually. This cable is only for use with snowblowers. Brands compatible with the cable include Cub Cadet, Craftsman, Huskee, Montgomery Wards, Bolens, Yard-Man, Yard Machines, Troy-Bilt, Ryobi, and MTD. When choosing a replacement cable, the owner must be sure that their choice will work with their make and model of snowblower.