Poulan Parts

This genuine carburetor repair kit is designed for use in select trimmer engines. The carburetor is responsible for combining the gas and air mixture that will go into the engine. Fuel and air flow into the carburetor through filters to remove any potential debris or particulates. Then, they are passed through a series of tubes and diaphragms and mixed together in the inner tube before being released into the engine through a butterfly valve. Over time, the high heat and constant pressure can damage the gaskets, diaphragms, and other parts of the carburetor. It may be necessary to replace everything with this carburetor repair kit that includes multiple components. This genuine OEM carb kit is compatible with select lawn and garden trimmers from Craftsman, Poulan, Weed Eater, and Jonsered. There are more than 50 compatible models available that can use this kit. This carburetor repair kit comes with 16 pieces in total, including the gaskets and diaphragms, the primer bulb and primer bulb assembly, and other necessary hardware. It is sold as a single unit. Always cool the engine completely and work in a well-ventilated area when performing carb rebuilds and replacements or other engine repairs.

This is a replacement chain brake that is designed as an identical part for select chainsaws. The chain brake is a safety component that covers the bar connection and helps to prevent injuries due to broken or loose chains. This piece is exposed to a lot of potential impact damage and debris, which can affect how well it works. The cover can become cracked or otherwise damaged. Without the chain brake cover, the saw will be unsafe to operate. In some cases, models may not operate at all until the chain brake is replaced. This genuine part will provide an exact fit for compatible saws. This OEM chain brake is manufactured by Poulan and compatible with more than 60 chainsaws from Poulan and Husqvarna. The chain brake is a high-quality part that is made of durable metal and plastic and it is sold as an individual piece. The hardware to install this part is sold separately. It is important to install the chain brake with the appropriate hardware and using the right tools so that it can be engaged to stop the chain in the event that it breaks or comes loose. Always disengage the spark plug or disconnect the power supply before performing equipment repairs.

The piston ring provides a seal between the cylinder wall and the piston, attaching inside the groove around the piston directly. It is responsible for keeping the combustion gases in the cylinder and preventing them from entering the crankcase. The piston ring may break down with general use over time or it may break unexpectedly due to some kind of damage or other mechanical failures. This creates poor compression in the cylinder and can result in a loss of power to the equipment. Significant leaks could result in an engine that won’t run at all. The Husqvarna piston ring is a genuine OEM part from American Yard Products, who manufactures equipment and parts for leading industry brands, including Husqvarna, Craftsman, Poulan and Poulan Pro, Weed Eater, Sears/Roper, Rally, Electrolux Home Products, and Yard Pro. This piston ring fits several models of leaf blowers and trimmers from the brands listed. Refer to your user manual parts diagram for exact part compatibility.

Combustion engines operate because of the chambers that seal in the tiny explosions caused by fuel, air and a spark. The pistons are part of the process of taking power from those explosions, and the piston rings seal the combustion chamber so that all of the gases created remain inside of the engine's crankcase. This replacement piston ring will ensure that a chainsaw's engine can do that, as well as maintaining the right amount of oil between the piston and the cylinder wall. An OEM replacement part, this piston ring works with Craftsman and Husqvarna chainsaws, among others. It will require a wrench set, screwdriver and a pair of pliers to make the replacement. Sold individually.

This genuine Husqvarna muffler for string trimmers and edgers is a necessary component for reducing noise from the equipment. While these machines might work without mufflers, they would be much louder. The muffler also prevents sparks from coming through and starting fires. This is particularly important when working with grass, leaves, and other dry debris.If the muffler is clogged, cracked, or broken, the engine on the equipment might not perform as it should. Clogs can occur over time due to the use and buildup of debris. Cracks and breakage are a normal part of wear and tear and would be easy to find during routine maintenance. Inspect for rust, cracks, breaks, and damage.Removal and replacement is a simple process using a screwdriver to remove the engine cover. Set the cover aside. Next, remove the bolts holding the old muffler in place. Remove the old muffler and discard. Wipe down the area while the muffler is off the equipment. This will prevent debris from interfering with the installation. Install the new muffler with the bolts included. Tighten the bolts but do not overtighten. Reinstall the engine cover and tighten the bolts. This muffler is compatible with Husqvarna trimmers. It is sold individually and comes with bolts.

As a small engine fuel tank, this part is designed to ensure your engine is secure, vented, and has clean fuel at all times. Many fuel tanks come with a vented gap to prevent pressure or a vacuum from being created in the fuel system. If fuel is coming out of the cap, a replacement cap may be required. Maintenance should be done on the fuel tank if you notice leaking or see debris floating in the tank. Repairing a damaged tank can result in fuel contamination, leakage, or fire, so replacement is the favored option. If the tank is damaged or cracker, replacement is required. The fuel should be drained before starting with the replacement process. This fuel tank is designed to attach to leaf blowers manufactured by Weed Eater, Craftsman, and Poulan. The fuel tank is a genuine OEM component that comes directly from the manufacturer. It comes as an individual part and does not include a fuel filter. The part is white and weighs less than six oz with dimensions of 9 x 3 x 2.5 inches. Attaching a new fuel tank will require the use of a hex screwdriver.

Chainsaws generate a great deal of heat and friction, but the oil pump systems that keep the situation under control. They do this through the use of chainsaw bar oil poured into a reservoir. It remains in the reservoir until the throttle is engaged which then cues the pump to spray oil out of a port and smear it on the bar and chain to reduce friction and heat. The use of the oil pump is crucial, and this OEM oil pump assembly is a full replacement for times when a chainsaw is not getting adequate oil on the bar. It works with Poulan, Craftsman, Poulan Pro, and others. This project requires only wrench and screwdriver sets to perform the repair. It ships as an individual kit ready for full replacement of the original oil pump.

This part is a replacement engine pulley. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or damaged engine pulley on lawn mowers.The engine pulley is what drives the equipment's transmission belt. If this pulley is worn or malfunctioning, the blades of the mower or tractor will not rotate properly, if at all. Thus, this part should be replaced in order for the equipment to function properly. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this engine pulley, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this engine pulley is suitable for use on several models of lawn mowers and lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

Leaf blowers are noisy machines in general, but could be far louder if they were not fitted with mufflers. This is the part that catches the sound emitted by the engine and keeps pressure in the engine at a balanced level. When a blower seems to running at a level of noise that is far above normal or if it doesn't seem to run as powerfully as it should, it might be that the muffler needs to be replaced. This replacement blower muffler is designed for use on blowers made by Husqvarna, Poulan and Weed Eater. It will suppress the amount of noise exiting from the engine. This is an OEM replacement part that is made of metal and ships individually. Replacing it is not a very complex task, but will vary from model to model. It can often be managed with only a screwdriver.

This part is a replacement screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a defective or misplaced screw in a variety of lawn equipment. This screw is a high-quality piece of standard hardware with multiple different uses. Screws are essential for securing parts of the equipment, but can easily become lost, stripped, or otherwise damaged. If screws are missing, it can affect the functionality of the equipment. A Phillips head or flat head screwdriver can be used to install this screw. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this screw is suitable for use on several models of lawn equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

The genuine replacement primer bulb covers the primer base and plunger on specific leaf blower models. Before starting the leaf blower, the primer is pushed to allow fuel to flow into the carburetor to assist in a smooth engine start. It can also make starting the equipment easier after it has been sitting for a period of time. The bulb is made of plastic and exposed to the elements, so over time it can become cracked, worn, or even completely lost. Without it, the engine cannot be properly primed before operating and therefore will not run as well. Replacing the bulb with a genuine OEM model like this should be done as soon as possible. This OEM primer bulb is manufactured by Husqvarna and can be used for a variety of leaf blowers that are manufactured by the brand. This model is also compatible with Poulan, Craftsman, and Weed Eater products. The bulb is made of durable rubber and may require a screwdriver for replacement to assist in fitting the bulb into place. This unit is sold individually and does not include the primer base assembly or any hardware.