Pruner Parts

Replacement fuel tank cap assembly for gas blowers and trimmers. Includes retainer connection. Replace if your cap is cracked, won't seal properly, or missing.

Seals the fuel line where it passes through the chainsaw fuel tank. Replace if cracked, worn, or leaking to prevent fuel seepage and maintain proper seal.

Cleans fuel before it enters the carburetor, catching dirt and debris. Replace when clogged to restore peak engine performance and prevent starting issues.

This is a replacement cutting chain designed for the pole saw attachment on a string trimmer. It wraps around the guide bar and performs the actual cutting of branches and limbs. Replace the chain if it has become dull, stretched, or has damaged or missing teeth, resulting in poor cutting performance or difficulty making clean cuts.

This genuine replacement part is a MTD 8” bar for use with chainsaws.This chain bar is for use with chainsaw attachments. It is used to provide a seat for the chain. It is responsible for guiding the movement of the chain, the chainsaw's cutting element. A properly functioning chain bar is essential for the safe and reliable use of a chainsaw. The chain bar may become worn out or damaged due to extended use, and will require replacement. Wear on the guide bar is usually most severe on the underside of the bar. Remember to check the bar periodically to spot any wear or damage. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. A wrench or allen key may be needed for installation of this part. Please note: For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with Troy-Bilt and Cub Cadet chainsaws.

Few parts fulfill as many roles on lawn mowers and other landscaping power tools than the cover screw. This screw serves to attach metal housing parts, assemblies, and shrouds to one another on equipment such as power vacuums, snow blowers, edgers, tillers, hedge trimmers, lawn tractors, leaf blowers, grass trimmers and cultivators. As these are extremely durable metal screws, they seldom fail under ordinary use. It should be noted, however, that they are most often used at connection and pressure points. Stresses at these junctions sometime loosen screws, causing them to be lost or occasionally resulting in stripped threads. It's also occasionally the case that these screws are lost during repair or routine maintenance of yard equipment because of their small size. Users should make sure to consult their owner's manuals for replacement steps and any special instructions. Because of their small size and the ease of losing them during repair work or maintenance, it's recommended to keep a supply of appropriately sized screws on hand. Most importantly, when replacing a part make sure to use a genuine OEM replacement part. They are manufactured according to the specs of the original parts and are perfect replicas.

This is a genuine replacement bolt that is designed for use with select trimmers and brush cutters. The metal hex screw is generally found on the starter cover and used to secure the cover to the trimmer to protect the internal engine components. Although the screw is durable, it can become damaged due to impact or another incident. It may also be lost in the process of other repairs or maintenance. It will need to be replaced with an OEM model like this screw for the best results. This 4x16 screw is manufactured by Shindaiwa and compatible with select machines from the brand, as well as those from Little Wonder and Echo. This metal screw is sold as an individual unit and does not include any additional parts or accessories. Replacing the starter cover screw is generally a simple task. Allow the engine to cool and disconnect the power supply. Then, use an Allen wrench to remove the old screw if it isn't already missing. Install the new screw and the job will be done. It is important to wear gloves and use the right size hex key to ensure that the screw doesn't get stripped during installation.

Wound spool assembly for gas and grass line trimmers. Holds and feeds trimming line during operation. Replace if cracked, broken, or worn for proper use.

This genuine Echo flywheel can be used as a replacement part for string trimmers, edgers, hedge trimmers, leaf blowers, leaf vacuums, and pole saws. The purpose of the flywheel in the small engine of such outdoor appliances is to save up the momentum generated by the combustion of the engine's fuel to maintain the rotation of the crankshaft while the engine is not actively using the fuel.A flywheel might have to be replaced in the lifespan of an outdoor appliance if it exhibits symptoms of malfunction such as frequently slipping gears, a burning smell, occasional unexplained kickback, and rattling noises coming from the brake clutch. If the flywheel exhibits any of these symptoms that are directly attributable to a malfunctioning flywheel upon inspection, the flywheel should be removed and replaced with this genuine OEM replacement part before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This flywheel is compatible with the following brands: Echo and Shindaiwa.

Replacement chain tensioner assembly for chainsaws. Installs near the bar to adjust chain tension. Replace if cracked, broken, or threads are stripped.

Many gas-powered small engines require the use of a pull cord to get the engine going. Rather than a starter, it is the pull of the cord that causes the engine to turn over and combustion to begin inside of the engine. These pull mechanisms often use a damper spring on the starter assembly. It exists to "pre-load" a recoil or pull starter with a lot of tension. When it malfunctions, it will take a tremendous amount of effort to get the engine going. This replacement damper spring is designed for a long list of Shindaiwa and Echo machines. These include trimmers, blowers, edgers, and more. This OEM replacement part is shipped individually and made of durable metal for years of service.

Here is a replacement intake gasket that can be used with a range of different types of lawn and garden equipment. The gasket is used as a means to provide an airtight seal between the insulator and carburetor. The gasket could become damaged due to heat from the engine, as well as through normal degradation over the seasons. The gasket may need to be replaced if the owner notices issues with the way the engine is running. Having too much air get into the carburetor will cause issues with the fuel-air mix. If there are misfires, less power, or if it is difficult to start the engine, it could be due to the gasket. If there are cracks of other issues, owners will want to replace the intake gasket right away. This gasket is an OEM part for Echo brand machines and is sold individually. It is for use with equipment such as string trimmers, edgers, hedge trimmers, and pole pruners.

This is a rope guide that is used with various types of lawn and garden equipment. It connects the rope handle and the starter rope. It helps prevent damage to either of the ropes by covering them in durable plastic material. Over time or through use, the rope guide can become damaged or break. If this happens, the part will need to be replaced. First, put the equipment on a flat surface. Drain the fuel from the tool and disconnect the spark plug wire. Next, the starter will need to be removed from the tool to gain access to the rope guide. The rope guide and any other damaged components, such as the string and springs, can be removed from the tool before adding a replacement component. This is an authentic OEM replacement component that is sourced directly from the manufacturer. It is sold as an individual part. The rope guide is compatible with string trimmers, leaf blowers, hedge trimmers, and pole pruners manufactured by Little Wonder, Echo, and Shindaiwa.

The genuine replacement air filter is made of foam and catches dust and debris from the air as it enters the engine on select lawn and garden equipment. Over time, filters will become clogged with regular use, which makes replacing them a part of routine maintenance on most engines. The air filter may also become clogged intermittently or due to excessive dust buildup between maintenance schedules, so it may be helpful to keep an extra filter on hand for emergency replacements. These filters cannot be cleaned and must be replaced when they become clogged. This genuine OEM filter is manufactured to exact standards by Husqvarna and is designed for use with hundreds of machines from Jonsered and Husqvarna, including blowers, trimmers, edgers, hedge trimmers, and saws. Replacing the air filter does not require any tools. Allow the engine to cool and simply remove the filter cover, take out the old filter, and replace the new filter. Then replace the cover. Always wear gloves when performing engine work. This filter is sold as a single unit and does not include the air filter cover or base assembly.

This OEM starter assembly is necessary for starting the handheld lawn and garden equipment. The starter assembly includes an orange plastic cover/housing and a black pull handle that's attached to a starter pulley assembly with a white pull rope. Please note that the fasteners to attach this to the machine are not included with this starter assembly part and must be ordered separately.A new starter assembly may be needed if the cover/housing is broken, the pull handle is broken, the rope is broken, or if any part of the pulley system is broken. If the rope does not retract, this is another sign that a new starter assembly is needed.This is a genuine Husqvarna part sourced directly from the manufacturer and sold individually. This part is compatible with outdoor power equipment manufactured by Husqvarna including edgers, hedge trimmers, pole saws, saws, and grass trimmers.