Range / Cooktop / Oven Burner & Related Parts

This burner cap sits on top of a gas cooktop surface burner to shape and protect the flame for even heating and safe operation. It restores proper flame pattern and helps keep the burner head clean. What it does:

• Covers the burner head to direct gas flow and create an even flame
• Helps prevent food and spills from clogging the burner ports
• Can improve ignition consistency and reduce yellow or uneven flames
• Replaces cracked, warped, or missing caps that cause poor heat distribution

• One replacement burner cap

• Ensure the appliance is OFF and completely cool before servicing
• Lift off the old cap and set the new cap in the correct position on the burner head
• No special tools required; verify the cap sits flat and centered before use
• Inspect for cracks or heavy corrosion; replace if damaged

This gas valve assembly controls gas flow to the appliance's burner, restoring reliable ignition and heating when the original valve fails. It replaces a faulty or leaking valve to help the unit heat safely and consistently. What it does:

• Regulates and routes gas to the burner based on the appliance's control signals
• Prevents gas flow when the appliance is off or during safety shutoff conditions
• Commonly used to address symptoms like no heat, weak heating, or a persistent gas smell when confirmed at the valve
• Works as the appliance's primary gas control component in the fuel delivery system

• One gas valve assembly

• Turn off gas supply and disconnect power before servicing; verify both are isolated
• Inspect all gas fittings and use an approved leak detection method after installation
• Do not modify the part; use proper tools and follow manufacturer service instructions

Color: Grey

This bake burner is the oven's main gas tube that produces steady heat for baking and roasting, restoring proper cooking temperatures and more consistent bake results. It fits gas ovens that use a separate bake tube assembly. What it does

• Directs and distributes the oven's gas flame to generate baking heat
• Restores proper oven temperature when the bake flame is weak or absent
• Helps eliminate uneven baking or undercooked dishes caused by a failing tube
• Works with the oven igniter and gas valve to light the burner safely

• One bake burner (bake tube) as shown

• Turn off gas supply and electrical power before starting work
• Removal may require disconnecting burner mounting screws and any brackets; keep track of fasteners
• Inspect and replace related parts (igniter, orifice) if ignition problems persist

The burner base is the metal burner head that supports the burner cap and directs the cooktop flame. Replacing a damaged burner base helps restore steady ignition and more even heat for everyday cooking. What it does:

• Provides the mounting surface and gas-port pattern for a surface burner and accepts the burner cap.
• Directs the flame for consistent heat across cookware.
• Common symptoms of a failing burner base: uneven or weak flame, burner won't light, visible corrosion or physical damage.
• Can cause repeated ignition attempts or poor heating when cracked, bent, or clogged.

• Turn off electrical power and the gas supply before servicing the range.
• Remove burner grates and caps to access the base; depending on model the base may lift out or be secured with fasteners.
• Inspect the igniter and surrounding components while replacing the base; reassemble and test the burner for proper ignition and flame pattern.

This burner inner cap is the small metal cap that sits on the center of a gas cooktop burner head to help direct and shape the flame for even heating. Replacing a damaged or misplaced cap restores correct burner performance and consistent cooking heat. What it does:

• Covers the burner head and helps direct gas flow for a stable, even flame
• Helps maintain proper flame pattern to avoid hot spots and uneven cooking
• Can resolve weak, flickering, or irregular flames when the cap is warped or missing
• Protects the burner head from spills and debris that can block ports

• Turn off the range and allow the burner to cool completely before servicing
• Remove the burner grate and lift off the old cap; seat the new cap flat onto the burner head
• Do not force or pry the cap into place—align it and let it sit naturally on the burner surface
• After installation, check burner ignition and flame pattern; if you smell gas or see unsafe flames, stop use.

This surface burner head replaces a worn or clogged top burner on gas ranges and cooktops, restoring a steady, even flame and reliable ignition so your burners heat consistently for everyday cooking.

• Mixes gas and air to produce the cooking flame
• Works with the igniter to light the burner
• Directs flame evenly around cookware
• Common symptoms: weak or uneven flame, yellow tipping, delayed ignition or no light, soot, or popping noises

• Disconnect electrical power and shut off the gas; allow the cooktop to cool completely
• Remove grate and burner cap; take out the mounting screw(s) and lift off the old burner head
• Align the new head with the igniter and orifice holder; reinstall screw(s) and the cap
• Restore gas and power; test ignition and verify a clean, even flame

• Many models use different burners by position and output; match the exact part number for the correct location
• Clear clogged ports with a soft brush or compressed air—do not enlarge ports with pins or drill bits

The Valve-Gas is an OEM part for Whirlpool gas cooktops. This valve is located underneath the cooktop and is responsible for controlling the flow of gas to each burner. 

Symptoms of a bad gas valve can include:

• Inability to ignite or adjust certain burner flames
• Gas leaks or smells around the valve area 
• Intermittent or irregular flame levels
• Yellow flames that pose a safety risk

Over time and with heavy usage, components inside the valve can wear down affecting proper gas regulation. 

Compatible models also include KitchenAid, Jenn-Air, Magic Chef, Admiral, and some Kenmore units. 

This burner base supports the cooktop's burner cap and directs flame for even heating. It replaces a damaged or warped base to restore stable burner alignment and consistent flame pattern. What it does:

• Holds the burner cap in place and centers the gas flame
• Channels gas flow for proper burner operation
• Helps prevent wobbling or uneven heating from a warped base
• Commonly replaced when the base is cracked, corroded, or bent

• One burner base (B)

• Turn off gas supply and power to the appliance before servicing
• Remove surrounding burner components and reassemble in reverse order
• Inspect nearby seals and burner ports for damage; replace if necessary

This burner cap assembly covers and protects the gas burner head and helps shape the flame for even cooking. It replaces a damaged or missing cap to restore proper burner appearance and flame pattern on compatible cooktops. What it does:

• Centers and shields the burner head to promote an even flame distribution during use
• Replaces cracked, warped, or missing caps that can cause uneven heating or unstable flames
• Helps maintain correct burner alignment for reliable ignition
• Restores finished appearance around the burner for safe, proper operation

• One black burner cap assembly

• Turn off gas supply and power to the appliance before servicing
• Allow the cooktop to cool fully; handle with care to avoid scratching or chipping
• Seat the cap squarely on the burner head—no tools typically required

Includes spark electrode.

This burner cap fits over a gas cooktop's surface burner to help direct flame for even heating and protect the burner head. It restores proper burner appearance and helps maintain efficient flame pattern for cooking. What it does:

• Covers and protects the gas burner head from spills and debris
• Shapes and stabilizes the burner flame for consistent heat distribution
• Helps prevent flame disturbance that can cause uneven cooking or clicking
• Restores a finished look to the cooktop surface

• 1 burner cap

• Turn off gas supply and ensure all surfaces are cool before handling
• Remove loose debris and set the cap on the burner head so it seats evenly
• If cap is warped or does not sit flat, inspect burner head for damage or debris
• Use only manufacturer-recommended parts and follow your appliance's service instructions

This burner cap sits over the gas burner head to focus and evenly distribute the flame on your cooktop or range. Replace a missing, chipped, or warped cap to restore smooth ignition and consistent, efficient heating.

• Shapes and diffuses the burner flame for even heat across cookware
• A properly seated cap promotes fast, reliable ignition
• Shields the burner head from spills and debris for consistent performance
• Replaces damaged or missing caps that can cause uneven/yellow flames, delayed ignition, or clicking without lighting

• Disconnect power and shut off gas; allow the surface to cool completely
• Lift off the old cap and clean the burner head/ports before installing
• Match the cap to the correct burner position for your model; caps are size-specific
• Seat the cap flat and centered, then test ignition and flame pattern

This burner head replaces the VG 230/330 style gas burner on compatible cooktops, restoring even flame distribution for reliable cooking. It's a direct-fit component used where the original burner cap is damaged or worn. What it does:

• Directs and shapes the gas flame for even heating across cookware.
• Replaces cracked, warped, or clogged burner heads that cause irregular flames.
• Helps restore proper ignition and consistent burner performance.
• Suitable for burners that show yellow tipping, sputtering, or weak flames (symptom dependent on overall valve and ignition condition).

• One burner head (VG 230/330 style)

• Turn off gas supply and power to the appliance before beginning service.
• Remove grates and burner caps; lift out the old burner head and seat the replacement securely on the base.
• Ensure burner ports are clean and unobstructed; test for proper ignition and flame pattern after reassembly.

The Gas Range LP Conversion Kit is an OEM part for specific Whirlpool gas ranges. It allows built-in ranges fueled by natural gas to be safely converted for use with liquid propane (LP) fuel. 

Symptoms requiring an LP conversion would include: 

• Inability to ignite or achieve proper combustion using natural gas 
• Unstable burner flame patterns or inconsistent heat output
• Gas leaks or improper connection to an LP fuel supply

Causes for needing an LP conversion kit include choosing to install the range in an area only serviced by LP gas, rather than natural gas. Additional causes could be wear and failure of the original equipment over time.  

This OEM kit is compatible with select Maytag, KitchenAid, Jenn-Air, and Kenmore gas ranges.