Range / Cooktop / Oven Burner & Related Parts

Converts your natural gas range to liquid propane. Includes orifices and parts needed for proper fuel type changeover in propane-supplied homes.

Simmer ring for gas range burners. Installs around the burner to control flame focus for low-heat cooking. Replace if cracked, warped, or missing.

Gas range burner cap sits on top of the burner head to direct gas flow and shape the flame. Replace if cracked, chipped, worn, or missing. Sold individually.

Holds the surface burner assembly in place and routes gas safely. Replace if cracked, warped, or damaged to restore proper burner positioning on your cooktop.

Replace a worn, cracked, or damaged bake burner assembly in your gas range oven. This direct-fit burner tube restores even heating and reliable ignition.

Medium burner crown for gas cooktops and ranges. Sits atop the burner base to shape and distribute flame. Replace if cracked, chipped, or damaged.

This LP conversion kit includes the orifice spuds and components needed to convert a natural gas range to liquid propane gas operation. The kit replaces the existing natural gas burner orifices with properly sized LP orifices to ensure safe and efficient flame output. Required when installing a natural gas range in a location that uses propane, or when switching fuel sources.

The LP Conversion Kit is an OEM replacement part for Whirlpool cooktops. It allows you to convert your cooktop from natural gas to LP gas, ensuring compatibility with your available fuel source. It includes all the necessary parts and instructions to safely and effectively convert your cooktop.

Causes of needing a conversion kit include:

• Switching from natural gas to LP gas as the fuel source
• Moving to a new location with different gas supply requirements

By using this LP conversion kit, you can enjoy the versatility and convenience of using LP gas on your Whirlpool cooktop.
This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Surface burner cap sits over the burner head to shape the flame. Replace if cracked, chipped, or worn to restore even heating and proper flame distribution.

Holds and positions the burner orifice above the surface burner on gas ranges. Replace if cracked, broken, or damaged to restore proper burner alignment.

Controls gas flow to your range burner for proper flame size. Replace if orifice is worn, clogged, or damaged to restore accurate gas metering.

Converts your gas range between natural gas and LP propane fuel sources. Includes orifices and components needed for safe fuel type conversion.

Surface burner head for gas ranges. Sits above the gas burner to distribute flame evenly. Replace if cracked, warped, or clogged from repeated use.

The Surface Burner Head is an OEM replacement part for Whirlpool ranges. This surface burner head sits above the gas burner below and allows for even heating of pots and pans placed on top of it. 

Over time, burner heads can become warped or cracked due to repeated heating and cooling. Thin burners can also wear down more quickly from scrubbing or friction during cleaning.

Symptoms of a bad surface burner head include:

• Uneven or inefficient heating from the burner surface
• Visible warping, cracks or damage to the burner surface 
• Burners that are difficult to clean leaving residue 

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models

This burner cap replaces a damaged or missing cap on a sealed gas cooktop burner to help protect the burner head and shape the flame for even cooking. Fits the corresponding factory burner head and restores normal flame pattern. What it does:

• Sits on the sealed burner head to direct and stabilize the gas flame
• Protects the burner head from spills and debris that can affect operation
• Helps restore even heating when a cracked, warped, or missing cap causes poor flame shape
• Works with the factory burner assembly to maintain safe burner performance

• One burner cap

• Ensure the range is OFF and the surface and burner are cool before installing
• Lift off the old cap and seat the replacement flat on the burner head; no tools typically required
• Inspect burner ports for clogs and clean gently if needed before installing the new cap

This LP conversion kit includes the orifice spuds and components needed to convert a 5-burner range from natural gas to liquid propane. Each orifice has a smaller opening sized for the higher pressure of LP gas. Use this kit if you are switching your gas supply type - improper orifice sizing can cause dangerously high or low flames, yellow or sooty burner flames, or ignition problems.