Range / Cooktop / Oven Burner & Related Parts

The LP Conversion Kit is an OEM replacement part for Whirlpool cooktops. It allows you to convert your cooktop from natural gas to LP gas, ensuring compatibility with your available fuel source. It includes all the necessary parts and instructions to safely and effectively convert your cooktop.

Causes of needing a conversion kit include:

• Switching from natural gas to LP gas as the fuel source
• Moving to a new location with different gas supply requirements

By using this LP conversion kit, you can enjoy the versatility and convenience of using LP gas on your Whirlpool cooktop.
This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Cap-Burner is an OEM replacement part for Frigidaire cooktops. It is a component located at the top of each burner element on the cooktop. The cap-burner sits directly over the burner element to distribute and maintain heat levels evenly across the heating surface. 

Causes of a bad cap-burner can include warping or distortion from excessive heat exposure over time. Wet or sticky messes can also lead to clogging or blockages.

Symptoms of a bad cap-burner include: 

• Uneven or inefficient heating of pots and pans placed on the burner surface
• Hot spots or areas of excessively high heat 
• Burner elements that do not ignite or power on as expected
• Smoke or burning smells coming from below the cap-burner

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

The Surface Burner Cap is an OEM part for Frigidaire ranges. It fits over the surface burner, providing a protective cover while ensuring proper gas flow and flame distribution.

A bad surface burner cap can be caused by wear and tear, damage, or improper cleaning. When the burner cap becomes faulty, it can result in issues such as uneven flames, inefficient heating, or difficulty in maintaining a consistent temperature.

Symptoms of a bad surface burner cap include:

• Uneven or flickering flames
• Difficulty in reaching desired temperatures
• Excessive gas odor during burner operation

Replace your faulty surface burner cap with this genuine OEM Frigidaire part to restore your cooktop. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Surface Burner Orifice Holder is an OEM part specially designed for Whirlpool gas ranges and cooktops. This part holds and positions the burner orifice above the surface burner, facilitating the mixture of gas and air required for combustion. 

Symptoms of a bad orifice holder include:

• Yellow or incomplete burner flames  
• Flames not remaining centered on the burner surface
• Burners that will not light or stay lit
• Gas leaks detected around the burner area

This is also compatible with Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper gas ranges and cooktops. 

The LP Cnvrsn-Kit is an OEM part compatible with Whirlpool ranges. It allows a range to use liquid propane gas instead of natural gas. The kit includes all necessary components to safely convert the range.

Symptoms of a bad conversion kit include:

• Gas leaks around pipe connections 
• Unable to light burners or ovens due to issues with gas flow
• Changes in flame color or uneven cooking performance

Causes of a bad conversion kit can include damaged or worn-out components that no longer regulate gas pressure properly or provide a secure connection. 

This replacement kit is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Conversion Kit is an OEM component specifically designed for LG gas ranges. This kit allows compatible electric and gas models to be converted between each type of fuel source.

Causes of needing a conversion kit include changing preferences between gas and electric cooking needs. Proper conversion maintains safety and performance. 

Symptoms of an incompatible fuel type include:

• Inability to ignite burners on a gas range  
• Lack of heating elements for an electric range
• Error codes or hazardous pilot light issues

This OEM LG part is also compatible with Sears/Kenmore ranges. Converting the fuel type with an official kit ensures the appliance operates as intended with its new power source. Dedicated expertise and parts maximize safety and efficiency.
 

Surface burner cap that sits over the burner head to shape the flame and protect the burner. Replacing a worn or damaged cap helps restore even heating and more consistent ignition on compatible gas ranges. What it does:

• Covers the burner head to direct the flame for more uniform cooking and to shield burner components from spills.
• Helps maintain stable flame performance; a damaged cap can cause uneven heat, sputtering, or intermittent ignition.
• Seats on the burner base in the OEM position to ensure correct flame pattern and heat distribution.
• Replace when cracked, chipped, warped, or visibly corroded to avoid cooking and ignition issues.

• Turn off the gas supply and allow the cooktop to fully cool before removing or installing the cap.
• Lift off the old cap and place the new cap flat on the burner base, ensuring it seats evenly.
• If ignition or flame shape issues continue, inspect and clean the burner ports and igniter with a soft brush.
• Do not force a warped or damaged cap into place; replace any deformed components.

This orifice spud positions the burner orifice for proper gas flow to the burner, helping restore consistent ignition and steady flame performance in gas ranges and ovens. It replaces a worn or damaged spud to help maintain safe burner operation. What it does:

• Secures the burner orifice in the burner tube so gas is delivered correctly to the burner
• Restores consistent flame shape and size when a damaged spud is causing uneven or weak flames
• Helps resolve ignition issues tied to a misaligned or broken orifice spud
• Works with the existing burner assembly and orifice insert to control gas flow

• Turn off the gas supply and electricity to the appliance before starting work
• Use basic hand tools; avoid overtightening fittings to prevent damage
• Check all connections for leaks after installation using a soap solution or approved leak detector

This orifice controls the flow of gas to a burner, helping produce the correct flame for safe, consistent cooking and baking. It replaces a worn or damaged gas metering jet to restore proper burner performance. What it does:

• Meter gas flow to a specific burner for correct flame size and heat output
• Helps maintain steady ignition and even cooking when functioning properly
• Commonly used when a burner shows a weak, uneven, or no flame
• Also replaces corroded or clogged jets that restrict gas flow

• Turn off the gas supply and power to the appliance before beginning work
• Use appropriate tools and avoid overtightening; match the replacement to the original part number
• Inspect for debris or corrosion and clean mating surfaces before installation

The Surface Burner Head is an OEM replacement part for Whirlpool ranges. This surface burner head sits above the gas burner below and allows for even heating of pots and pans placed on top of it. 

Over time, burner heads can become warped or cracked due to repeated heating and cooling. Thin burners can also wear down more quickly from scrubbing or friction during cleaning.

Symptoms of a bad surface burner head include:

• Uneven or inefficient heating from the burner surface
• Visible warping, cracks or damage to the burner surface 
• Burners that are difficult to clean leaving residue 

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models

The Surface Burner Head is an OEM replacement part for Whirlpool ranges. This surface burner head sits above the gas burner below and allows for even heating of pots and pans placed on top of it. 

Over time, burner heads can become warped or cracked due to repeated heating and cooling. Thin burners can also wear down more quickly from scrubbing or friction during cleaning.

Symptoms of a bad surface burner head include:

• Uneven or inefficient heating from the burner surface
• Visible warping, cracks or damage to the burner surface 
• Burners that are difficult to clean leaving residue 

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models

The 5 Orifice LP Conversion Kit is an OEM part for Whirlpool gas ranges. It allows you to convert your range from natural gas to liquid propane fuel, providing flexibility in fuel options for your cooking needs.

Symptoms of a bad LP orifice can include:

• Incorrect orifice type for new gas hookup
• Inconsistent flame or yellowish flame color
• Unusual odors or gas leaks

Restore your gas range by using this genuine OEM LP Conversion Kit. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This burner cap replaces a damaged or missing cap on a sealed gas cooktop burner to help protect the burner head and shape the flame for even cooking. Fits the corresponding factory burner head and restores normal flame pattern. What it does:

• Sits on the sealed burner head to direct and stabilize the gas flame
• Protects the burner head from spills and debris that can affect operation
• Helps restore even heating when a cracked, warped, or missing cap causes poor flame shape
• Works with the factory burner assembly to maintain safe burner performance

• One burner cap

• Ensure the range is OFF and the surface and burner are cool before installing
• Lift off the old cap and seat the replacement flat on the burner head; no tools typically required
• Inspect burner ports for clogs and clean gently if needed before installing the new cap

This bake burner is the oven's gas combustion component that produces the heat for baking and roasting. It restores reliable oven heating so you can cook and bake at the proper temperatures. What it does

• Provides the primary gas flame for the oven's bake function.
• Helps the oven reach and maintain baking temperatures.
• Resolves symptoms like no oven heat, weak or erratic bake flame, or oven not maintaining temperature.
• Works with the oven's ignition system and safety controls to light and sustain the burner.

• One bake burner assembly.

• Turn off gas supply and power to the appliance before beginning any work.
• Inspect ignition and burner ports for debris; clean or replace as needed for proper lighting.
• Follow the oven manufacturer's service instructions and local codes when reconnecting gas lines.

This orifice directs a controlled flow of gas to the appliance burner, helping restore the correct flame size for reliable heating and ignition. Use when burner performance is weak or inconsistent to help return proper operation. What it does

• Restricts and meters gas flow to the burner for consistent flame characteristics
• Helps the burner ignite and maintain a steady flame when sized correctly
• Commonly replaces worn, clogged, or damaged orifices that cause low or irregular flames
• Resolves symptoms like weak heat, slow ignition, or uneven burner performance

• Turn off gas supply and electrical power before servicing; follow all safety precautions
• Inspect surrounding burner and sealing surfaces for debris or damage before installation
• Tighten securely but avoid overtightening; use proper fittings and thread sealant rated for gas if required

The LP Conversion Kit is an OEM part for Whirlpool gas cooktops. This kit allows a range designed for natural gas to be safely converted for use with liquid propane gas.

The conversion kit includes all necessary components to modify the gas valve, burner heads, and airflow to accommodate propane fuel. This ensures proper gas-air mixture and optimal combustion when operating on liquid propane.

Causes of needing conversion include switching to propane fuel when the range was originally set up for natural gas.

Symptoms of needing an LP conversion include:

• Inability to ignite burners or oven pilot light on propane
• Yellow burner flames and decreased heat output
• Gas smell from the range

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.