Range / Cooktop / Oven Control Board

Fixes ovens that shut off during heating or lose temperature over time. Controls heating elements through relay signals. Moderate difficulty repair.

Oven won't bake or broil? This electronic control board manages oven functions and displays. Moderate DIY repair requires console removal.

This is an LED display module that mounts on the control panel of a range or oven. It shows temperature settings, cooking times, error codes, and other operational information. Replace this module if the display is blank, flickering, showing partial or garbled characters, or if segments of the readout are no longer illuminating.

Fix F13, F30 error codes or a non-responsive oven display with this electronic control board. Manages temperature and timer functions. Moderate DIY install.

Fix a dim or blank oven display and unresponsive buttons with a new clock timer control board. Straightforward repair for failed digital displays.

This electronic oven control board governs your range's heating functions and displays the time and timer. Replacing a failed board restores reliable bake/broil operation, accurate temperature control, and a responsive clock/timer interface. What it does:

• Controls bake/broil circuits to run selected cooking modes
• Monitors the oven temperature sensor and regulates heat to the set temperature
• Drives the time-of-day and countdown timer display
• Interprets keypad inputs for mode selection and settings
• Failure symptoms can include no heat or erratic heat, a blank or flickering display, or unresponsive buttons

• One electronic control board assembly

• Disconnect power at the breaker before servicing; verify no voltage is present
• Use anti-static precautions and handle the board by its edges
• Photograph wiring and transfer connectors one at a time to the same positions
• Reuse the existing mounting hardware and any faceplate/overlay as required; set the clock after restoring power

Fix an oven that won't heat, shows error codes, or has an unresponsive display. This control board regulates heating elements and oven functions.

This oven control board manages the range's bake and broil functions, temperature regulation, and the display/timer. Replacing a failed board restores accurate heating and responsive controls so the oven starts, runs, and shuts off as expected.

• Regulates bake and broil element relays based on temperature-sensor feedback and user settings
• Powers and manages the clock, timer, and oven display interface
• Common symptoms of failure: no bake/broil heat, blank or unresponsive display, beeping or error codes, oven won't turn off, or erratic temperature
• Helps restore consistent preheating and temperature control when the existing board is faulty

• Disconnect power at the breaker before servicing; verify no power is present
• Access the board from the control panel/backguard area
• Photograph wiring, then move connectors and mounting hardware to the new board one-for-one; handle electronics by the edges to avoid ESD damage
• After reassembly, restore power and test bake and broil functions and the display/keys

Display blank or controls unresponsive? This oven control board manages the clock, timer, and cooking functions. Moderate difficulty repair restores operation.

If your range display blanks out, shows error codes like F8:E0, or doesn't respond to controls, the electronic control board likely failed. Restores normal operation.

If your oven won't heat or displays error codes, the relay board may have failed. This assembly routes power to burners and heating elements.

Fix an oven that shuts off during cooking or won't maintain temperature. This range control board monitors heat and sends power to the oven elements.

Fixes oven that won't start, won't heat, or shows error codes. This control board manages temperature cycles and display functions. Moderate DIY repair.

This electronic PC board is the appliance's main control, processing inputs and directing power to components so cycles run correctly. Replacing a failed board can restore normal operation when the unit is dead, won't start, or stops mid-cycle.

• Interprets user inputs and sensor feedback to execute programmed cycles
• Switches relays to power motors, valves, heaters, and other loads as required
• Manages timing, temperature, and safety logic for consistent performance
• Typical failure symptoms: no power/won't start, unresponsive or erratic controls, cycles ending prematurely, recurring error codes

• Disconnect power before servicing; verify power is off with a meter
• Use ESD protection; handle the board by the edges to avoid static damage
• Move connectors one at a time to identical positions on the new board to prevent miswiring
• Some models require service-mode setup or calibration after installation—follow your model's service documentation

Fix display issues, unresponsive controls, or oven overheating with this electronic control board. Manages bake/broil functions and timing display.

Fix F10 or F11 error codes with this range electronic oven control board. Restores accurate temperature control and timer functions. Moderate DIY repair.