Refrigerator Gasket & Seal

Ordered the parts online and fixed it myself. Read more

Ordered replacement seals for both freezer and refrigerator sides. Followed directions that I had found on YouTube. The installation in a nut shell is warm the seals in a bathtub with very hot water for at least 2-3hrs then place the seals. Then warm the seals with a hair dryer as needed. After getting the seals out of the hot bath the installation took all of 20-25 minutes for both seals. Read more

Replaced it with a new one from appliance which we received in one day Read more

Removed the worn gasket, cleaned the door, snapped on the new gasket. Read more

Replaced door seal Read more

• Fridge too warm

Unfortunately, this model has the screws that you need to loosen before you can squeeze the rubber in but the gaskets fit perfectly. It took a lot more time than the video showed but that was because the video was of the pop in type. Be sure when pushing the rubber under the metal strip you make sure it actually goes in. I think the last people installed the gaskets incorrectly and that's why they broke and pulled out of place. Unscrew the bolts first, I used an electric drill. The old gasket... Read more

I removed the fresh food ice maker found the drain tube for ice maker frozen. This was causing the back of the unit to rust out. This also caused the water to run down the back of the unit the into the duct work and into the freezer causing ice buildup. I then defrosted the freezer removed the rear duct work and the freezer drain pan cover. I found the freezer drain was not draining. I removed the exterior rear cardboard cover and located the freezer drain tube removed it and found that it was... Read more

Ordered new gasket seals and had someone install them, Installed one prior myself and it was very difficult to heat and stretch and wrap doors. Ended up gouging my cabinet when stretching the seal . Leave for professionals and even they struggled. Tight now and working great. Read more

A tree had fallen across our power lines and the resulting power surge fried the circuit board. The diagnosis was a bit difficult and involved an educated guess based on how the frig was acting. The display was dark unless a button was pressed and the inside light worked but that was all. I had to rule out the compressor as the root cause so I back fed power to the compressor and heard it and the condenser fan fire up. I ordered the board and found the only way I could get it overnight was to... Read more

Removed the old gasket easily and pushed the new one in. Easy job Read more

I pulled the old gasket off the door then I used rubbing alcohol to clean the mold along the back of the door and in the insert for the gasket seals . The new gasket fit extremely well and was very easy to put in. I waited 24 hours for the gasket to come back to its normal shape. After putting the gasket in I waited another 24 hours to make sure that I was getting no Icing inside the freezer area. There was no icing so the job is completed. Read more

Refrigerator door gasket. I ordered one gasket from you guys, it was so easy to replace. Everything is working fine Read more