Refrigerator Ice Maker & Related

This ice bucket auger is the helical drive inside the ice bin that advances cubes to the crusher or chute. Replacing a worn auger restores smooth, consistent dispensing of cubed or crushed ice.

• Rotates to move ice through the bucket, delivering cubes to the dispenser or through the crusher for crushed ice
• Replaces a cracked, bent, or stripped auger/helix that stalls or jams
• Can help with symptoms such as no or slow ice dispensing, auger not turning, or grinding/clicking from the ice bin
• Restores reliable engagement with the auger motor and crusher assembly

• Unplug the refrigerator and wear cut-resistant gloves
• Remove and empty the ice bin; allow any frost buildup to thaw
• Disassemble the bucket; note the exact order of crusher blades, spacers, washers, and other hardware, then transfer them to the new auger in the same sequence
• Reinstall the bin, ensuring the auger seats fully on the drive coupler before restoring power and testing

The Icemaker is an OEM part for Whirlpool refrigerators. It is designed to produce ice automatically, providing a consistent supply of ice cubes without the need for manual filling. The icemaker integrates seamlessly into the freezer compartment, making it a convenient and essential feature for households.

Over time, icemakers can develop issues due to factors such as mineral buildup, electrical problems, or mechanical wear and tear. A faulty icemaker can result in inconsistent ice production or complete failure to produce ice.

Symptoms of a bad icemaker include:

• No ice production or insufficient ice output
• Ice cubes that are smaller than usual or irregularly shaped
• Leaking water within the freezer or around the icemaker
• Unusual noises during the ice-making process

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This ice maker assembly replaces a failed refrigerator ice maker to restore automatic ice production and reliable cube harvesting. Use it to address lack of ice or irregular ice cycling so your appliance makes ice again. What it does:

• Freezes and cycles water into ice, then harvests cubes into the ice bin.
• Common replacement for no ice production, reduced output, or an ice maker that won't cycle.
• Helps isolate ice-maker failures from water-supply or valve issues when diagnosing ice problems.

• Always disconnect power and shut off the water supply before beginning service.
• Some installs require removing shelves, drawers or interior panels.
• Basic hand tools are typically all that's needed; handle electrical connectors and the fill tube carefully.
• If issues continue after replacement, verify water supply pressure and the water inlet valve.

The Ice Pan is an OEM part for Whirlpool refrigerators. It is used to collect and store ice produced by the icemaker, ensuring a dedicated space for easy access and storage of ice. It measures approximately 11" W x 8" H x 20" D. 

Causes of a bad ice pan can include cracks or breaks due to handling or impact, warping from temperature fluctuations, or general wear and tear over time. A damaged ice pan can lead to leaks or improper ice storage, impacting the overall functionality of the icemaker.

Symptoms of a bad ice pan include:

• Cracks or visible damage to the pan
• Leaks or water pooling in the freezer
• Ice not being stored properly or the pan not fitting correctly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Ice Bucket and Auger Assembly is an OEM replacement part for Whirlpool refrigerators. It includes both the ice storage bucket located in the freezer as well as the internal auger component. The auger works to periodically eject ice from the icemaker out into the conveniently accessible bucket area.

Causes of a bad assembly can include wear and tear of the auger motor or gears over extended use. Damage may also occur from chewing or impact within the unit.

Symptoms of a bad ice bucket and auger assembly include:

• Ice backing up and not dispensing properly from the icemaker
• Ice accumulating inside the refrigerator walls
• The bucket not filling completely or ice spilling out
• Loud grinding or clicking noises coming from inside the wall

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Ice Container Assembly is an OEM part for Frigidaire refrigerators. This assembly is responsible for storing ice that is produced by the icemaker. It fits within the freezer compartment, providing a dedicated space for ice storage, ensuring easy access and organized containment.

Causes of a bad ice container assembly can include wear and tear from regular use, physical damage from dropping or mishandling, and exposure to extreme temperatures which can make the plastic brittle over time.

Symptoms of a bad ice container assembly include:

• Cracks or holes in the container
• Ice spilling or not being contained properly
• Difficulty in inserting or removing the container from the freezer
• Ice melting or clumping due to poor insulation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Ice Container Assembly is an OEM part for Whirlpool refrigerators. This assembly includes the ice bin, where ice is collected, and often features integrated mechanisms or augers for dispensing ice through the refrigerator's door.  

Causes of a bad Ice Container Assembly can include cracks or damage to the bin, which can lead to ice leaks or accumulation in the freezer; wear or malfunction of the dispensing mechanism, affecting its ability to deliver ice.

Symptoms of a bad Ice Container Assembly include:

• Difficulty in dispensing ice or complete failure to dispense
• Ice accumulation outside of the bin, indicating a potential crack or gap
• Excessive frost or ice buildup restricting the assembly's movement
• Noticeable cracks or damage to the ice container itself

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Note: This is the complete horizontal ice dispenser bucket assembly with a crusher. It fits 25 and 27-cubic-foot refrigerator models. For 20 cubic foot models order WP2209778. For 22 cubic foot models order WPW10312301.

The Ice Container Assembly is an OEM part for Frigidaire refrigerators. This part stores ice produced by the icemaker, providing a convenient and accessible location for ice storage within the freezer.

Common causes of a bad ice container assembly include cracks or breaks from dropping the container, wear and tear from frequent use, or damage from excessive force when removing or inserting the container.

Symptoms of a bad Ice Container Assembly include:

• Cracks or breaks in the container
• Ice spilling out or not staying contained
• Difficulty in inserting or removing the container
• The container not fitting properly within the freezer

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Refrigerator Ice Maker Assembly is an essential component for maintaining a steady supply of ice in your Samsung refrigerator. This genuine OEM part ensures reliable performance and seamless integration with your appliance, restoring the ice-making functionality swiftly. Designed specifically for Samsung refrigerator models, it guarantees a perfect fit and easy installation, saving you time and effort. The ice maker assembly is built with high-quality materials, providing durability and long-lasting use, so you can enjoy consistent ice production without frequent replacements. By choosing this genuine OEM part, you benefit from optimal efficiency and compatibility, enhancing the overall performance of your refrigerator. Whether your current ice maker is malfunctioning or has stopped working altogether, the Refrigerator Ice Maker Assembly offers a practical solution to restore convenience and functionality to your kitchen. Invest in this reliable component to ensure your Samsung refrigerator continues to meet your daily ice needs seamlessly.

The Ice Mold is an OEM part for Whirlpool refrigerators. This component forms the ice cubes in the icemaker, shaping the water into cubes as it freezes. The ice mold is crucial for the efficient production of ice, ensuring that each cube is properly formed and easily released into the ice bucket.

You should replace the ice mold if it shows signs of wear or damage. Causes of a bad ice mold can include mineral buildup from hard water, physical damage to the mold surface, or malfunctioning heating elements that prevent ice from releasing properly.

Symptoms of a bad Ice Mold include:

• Ice cubes not forming correctly or being irregular in shape
• Ice cubes sticking to the mold and not dispensing
• The icemaker not producing ice at all
• Leaks around the icemaker area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Icemaker is an OEM part for Whirlpool refrigerators. This part produces ice automatically, ensuring a steady supply of ice cubes for daily use. 

Causes of a bad icemaker can include a malfunctioning water inlet valve, damaged or clogged water lines, faulty heating elements, or issues with the control module.

Symptoms of a bad icemaker include:

• No ice production
• Smaller than usual ice cubes
• Leaking water around the icemaker
• Ice cubes getting stuck in the tray
• Unusual noises during the ice-making process

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Icemaker Shut-Off Arm is an OEM replacement part for Whirlpool refrigerators. Located within the freezer compartment attached to the ice maker assembly, this lever arm activates the shut-off switch to terminate the harvest cycle once the ice bin is full.

Causes relate to cracked or broken lever arms no longer reliably engaging the switch assembly. Mineral scale accumulation may also inhibit smooth operation over time.

Symptoms of a faulty shut-off arm include:

• Ice piling up outside the bin instead of dispensing properly
• The Bin light remaining on indicates a full bin when more ice can still fit
• Excessive ice production drives up energy costs

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The Shaft is an OEM replacement part for Whirlpool refrigerators. As a part of the ice bin assembly, it works to eject cubes from the bin.

Causes of shaft malfunction include wear and fatigue stress from years pushing ice through the chute. Mineral deposits inhibiting smooth rotation also lead to failures over time.

Symptoms of an inefficient auger shaft comprise:

• Failing or sporadic ice release from the icemaker compartment
• Abnormal noises like grinding coming from shaft area
• Reduced ice output volumes versus when new

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The Ice Bucket is an OEM replacement part for GE refrigerator-freezers. It collects and stores freshly produced ice within the freezer compartment.  This bucket is made of white plastic and is approximately 13 inches in length and 9 inches wide at the widest point.

Causes of a bad ice bucket can include wear and tear over time, or damage to the bucket or its components due to mishandling or impact. Please note, this is just the ice bucket and does not include the auger or auger motor.

Symptoms of a bad ice bucket include:

• Cracks or breakage in the bucket
• Ice not dispensing properly
• Bucket not fitting securely in its compartment
• Visible damage or wear to the bucket

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ice Dispenser Yoke is an OEM replacement part for Whirlpool refrigerators. It houses the ice dispensing mechanism and guides ice from the ice bucket into the chute upon user activation.

Causes of a bad ice dispenser yoke include worn gears or parts that lead to failure of the dispensing mechanism. Broken pieces or cracks in the yoke itself can also prevent proper ice delivery.

Symptoms of a bad ice dispenser yoke include:

• Ice jams or fails to dispense from the refrigerator door
• Chunky or uneven pieces of ice dispensed
• Grinding or sticking sounds coming from the ice dispensing area
• Dispenser mechanism not activating or operating as intended

This OEM Whirlpool part keeps operations efficient without spills or frustration. It's also compatible with models by Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper refrigerators.

The Ice Maker Assembly is an OEM part for LG refrigerators. This part produces ice within the freezer, ensuring a consistent supply for your needs. 

Causes of a bad ice maker assembly can include electrical issues, mechanical wear and tear, or blockages in the water supply. 

Symptoms of a bad ice maker assembly include:

• No ice production
• Reduced ice output
• Leaking water within the freezer
• Ice cubes not being ejected properly
• Unusual noises coming from the ice maker

This OEM LG part is also compatible with some Kenmore models.