Refrigerator Motor

This refrigerator fan motor drives the fan that circulates air through the cooling system, helping maintain even temperatures. Replacing a worn or noisy motor can restore proper airflow and cooling performance.

• Spins the fan blade to move air across coils and through the appliance's airflow passages
• Helps maintain set temperatures and consistent cooling throughout the unit
• Common failure signs: fan not running, intermittent/slow operation, loud humming, grinding, or squealing
• Symptoms include weak airflow, poor cooling, warm spots, or the compressor running longer than normal

• Disconnect power before servicing; wear cut-resistant gloves
• Access location varies by model; note wire positions and hardware
• Transfer the existing fan blade and mounting hardware if required by your model
• Ensure the fan spins freely and wires are routed clear of the blade before restoring power

This evaporator fan motor assembly moves cold air across the evaporator and throughout the fresh food compartment to keep temperatures even and cooling consistent. Replace it to restore proper airflow and help eliminate warm spots or frost buildup. What it does

• Circulates chilled air from the evaporator into the refrigerator section
• Helps maintain stable temperatures and consistent cooling performance
• Replaces a motor that is noisy, stalls intermittently, or doesn't run
• Helps with symptoms like weak/no airflow from refrigerator vents, a warm fridge compartment, or ice/frost on the rear interior panel

• One refrigerator fan motor assembly

• Disconnect power to the refrigerator before servicing
• Access the assembly behind the rear interior panel of the refrigerator section
• Remove the panel, disconnect the wire harness, and release the motor assembly from its mounts; transfer any model-specific fan blade or isolators if required
• Ensure the fan spins freely and wiring is clear of the blade before restoring power; use care around sharp edges and the evaporator coil

This DC evaporator fan motor circulates cold air across the evaporator coil and throughout the cabinet. Replacing a noisy or non-running motor restores airflow so the refrigerator cools evenly and reliably. What it does

• Draws air across the evaporator coil and distributes chilled air between sections
• Helps maintain stable temperatures and recover after door openings/defrost
• Common symptoms: refrigerator too warm, weak or no airflow from vents, loud or intermittent fan noise, frost buildup around the evaporator cover
• Fan may not run even though the compressor and lights are on

• Includes: 1 DC fan motor

• Unplug the refrigerator and wear cut-resistant gloves
• Remove the evaporator cover to access the motor; disconnect the wire harness
• Reuse your existing fan blade, grommets, and bracket if applicable; match the original orientation
• Route wires clear of the blade, reassemble, restore power, and verify airflow

Replacement fan motor that circulates air to help maintain proper operating temperature and protect components from overheating. Restores airflow to stop noisy operation, vibration, or a fan that won't run. What it does:

• Drives the appliance cooling/evaporator/condenser fan to move air across coils and components.
• Restores proper airflow to improve cooling performance and reduce overheating risk.
• Stops common symptoms like loud humming/grinding, excessive vibration, or a fan that does not spin.
• Helps prevent related issues caused by stalled or weak fans.

• Disconnect power to the appliance before beginning any repair.
• Handle the fan blade and motor shaft carefully to avoid damage; use basic hand tools.

This evaporator fan motor drives airflow across the evaporator coils and circulates chilled air throughout the cabinet. Replacing a weak or noisy motor restores proper air circulation, helping stabilize temperatures and overall cooling performance.

• Circulates air across the evaporator and distributes it between the freezer and fresh-food sections
• Helps maintain even temperatures and consistent cooling
• Common symptoms: fan not running or intermittent, loud humming/squealing/rattling from the freezer area
• Presents as weak airflow from vents or a warm refrigerator section while the freezer seems colder

• Disconnect power before servicing to avoid electrical shock
• Access the motor behind the rear freezer panel; remove shelves/bins and panel as needed
• Transfer the existing fan blade, bracket, grommets, and wiring connectors from the old motor if required
• Match wire orientation, secure the motor, ensure the blade spins freely and blows the correct direction before reassembly

The Refrigerator Fan Motor Assembly is essential for maintaining optimal airflow in your Samsung refrigerator. This genuine OEM part ensures your appliance operates efficiently, providing consistent cooling throughout. Designed specifically for Samsung refrigerator models, it guarantees a perfect fit and reliable performance. The fan motor assembly effectively circulates cold air, helping to preserve your food's freshness and extend its shelf life. With its high-quality construction, this part offers durability and long-lasting functionality, reducing the need for frequent replacements. Installing the Refrigerator Fan Motor Assembly is straightforward, allowing you to restore your fridge's performance quickly and easily. Whether your current fan motor is malfunctioning or making excessive noise, this genuine OEM part is the ideal solution to enhance your refrigerator's efficiency and ensure a comfortable storage environment for your groceries.

The Ice box Fan is an OEM part for Whirlpool refrigerators. Located inside the freezer compartment, it circulates cold air to the ice maker compartment.

Causes of a bad icebox fan include failure of the motor from continuous operation, or damage to fan blades.  

Symptoms of a bad icebox fan involve:

• Clicking or grinding noises emanating from inside walls
• Ice compartment not cool enough
• Ice melting
• No ice being made

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This evaporator fan motor assembly circulates cold air across the evaporator coils to maintain even temperatures and help the refrigerator cool efficiently. Replaces a worn or noisy evaporator fan motor to restore airflow. What it does:

• Moves air over the evaporator coils to support consistent cooling and temperature distribution.
• Helps prevent frost buildup by maintaining airflow across the evaporator.
• Reduces noise or vibration caused by a failing or unbalanced fan motor.
• Supports proper defrost performance by ensuring air circulation during cycles.

• One evaporator fan motor assembly

• Disconnect power to the appliance before inspecting or replacing the fan assembly.
• Replacement may require removing interior panels or the freezer evaporator cover; keep fasteners organized.
• Handle the fan blades carefully to avoid bending; ensure proper blade alignment on the motor shaft.

This fan assembly circulates air through the appliance so coils and internal components operate at the proper temperature. Replacing a failed or noisy fan can restore airflow and help prevent performance issues caused by weak circulation.

• Moves air across coils and components to support designed cooling/dehumidifying performance
• Helps maintain steady airflow to reduce overheating or icing conditions
• A failing fan can cause little to no airflow even when the unit is running
• Common symptoms: fan not spinning, intermittent operation, loud rattling/grinding, vibration, or thermal shutdown

• Disconnect power before servicing to avoid electrical shock or injury
• Access the fan area per your unit's service information; remove panels/shrouds as needed
• Note wire connections and mounting order; transfer any brackets, grommets, or hardware from the old assembly
• After installation, ensure the fan spins freely and clears all shrouds, then test operation before reassembly

The Refrigerator Motor and Fan Assembly is a dependable component designed to ensure your refrigerator operates at peak performance. This genuine OEM part plays a crucial role in circulating air effectively, maintaining consistent cooling throughout your appliance. Compatible with a wide range of Samsung refrigerator models, it guarantees a perfect fit and easy installation, making it a practical choice for DIY repairs. By replacing a malfunctioning motor or fan with this high-quality assembly, you can enhance your refrigerator's energy efficiency and extend its lifespan. The durable construction of the Refrigerator Motor and Fan Assembly also helps reduce noise and vibrations, creating a quieter and more comfortable kitchen environment. Investing in this genuine OEM part means you can trust in the reliability and performance of your Samsung refrigerator, ensuring your food stays fresh and your appliance runs smoothly for years to come.

Replacement motor-fan that restores airflow and reduces noise by replacing a worn fan motor assembly. Designed to move air through the appliance so it runs cooler and more efficiently when the original motor fails or becomes noisy. What it does:

• Drives the appliance blower to circulate air and vent heat
• Restores proper airflow when the original motor seizes or loses power
• Stops or reduces grinding, squealing, or rattling caused by worn bearings
• Helps prevent overheating related to poor or no air movement

• Disconnect power before starting; this part involves live wiring and moving components
• Basic hand tools and access to the blower/motor housing are typically required; consider a service manual for disassembly steps
• If you find damaged wiring or mounting hardware, replace those items as needed.

Replacement fan motor that powers the appliance's blower to circulate air for proper cooling and ventilation. Restores airflow and helps reduce noisy operation, overheating, or poor circulation caused by a failed motor. What it does:

• Drives the blower wheel to move air through the appliance, addressing weak or no airflow.
• Stops or reduces unusual grinding, rattling, or humming noises when the original motor fails.
• Restores proper ventilation to help prevent overheating and maintain consistent temperature.
• Used as the specified replacement when this part number is required.

• Disconnect power to the appliance before servicing; for gas models, shut off the gas supply as well.
• Handle wiring connectors carefully and match connector positions/colors during reassembly.
• Basic hand tools are typically required.

This evaporator fan motor circulates cold air across the evaporator coil so your refrigerator/freezer cools evenly and runs efficiently. Replacing a failed motor restores airflow to help maintain consistent temperatures. What it does:

• Spins the evaporator fan to move cold air through the evaporator compartment and into the cabinet.
• Helps prevent frost buildup by maintaining steady airflow over the coil.
• Common symptoms: loud or grinding noise from the freezer, weak or no airflow, uneven cooling or warm spots.
• Works as the refrigerator's evaporator airflow motor to support normal compressor/cooling operation.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Access typically requires removing interior panels in the freezer/evaporator area; handle evaporator coil and insulation carefully.
• Inspect fan blade and housing for damage; replace blade if cracked or missing.

The Refrigerator Fan Motor Assembly is essential for maintaining optimal airflow within your refrigerator. This high-quality genuine OEM part ensures your Samsung refrigerator operates efficiently by circulating cool air evenly throughout the appliance. Designed specifically for Samsung refrigerator models, this fan motor assembly guarantees a perfect fit and reliable performance. Replacing a faulty fan motor with this genuine OEM part helps prevent temperature fluctuations, ensuring your food stays fresh longer. Its durable construction provides long-lasting functionality, reducing the need for frequent repairs. Easy to install, the Refrigerator Fan Motor Assembly allows you to restore your refrigerator's performance quickly and effectively. Trust in this genuine OEM part to enhance the longevity and efficiency of your Samsung appliance, providing you with a consistently excellent cooling experience.

Condenser fan assembly moves air across the condenser to help dissipate heat so the refrigerator cools efficiently. Replacing a failing condenser fan can reduce noise and prevent the compressor from working overtime. What it does:

• Circulates air over condenser coils to remove heat produced during cooling
• Helps maintain proper compressor operating temperature and system efficiency
• Stops or reduces loud buzzing, grinding, or rattling noises when the fan motor fails
• Addresses symptoms like frequent compressor cycling, poor cooling, or warm interior

• Always disconnect power to the appliance before accessing the condenser area
• Access is typically at the rear lower panel; remove panels carefully to reach the assembly
• Note fan blade orientation and wiring before removing; reconnect wires to the same terminals

This damper motor assembly controls the refrigerator air damper to help regulate airflow between compartments, restoring proper temperature balance and reducing uneven cooling when the original motor fails. What it does:

• Moves the air damper to open or close airflow between freezer and fresh-food sections
• Allows the fridge control to direct colder or warmer air as needed for temperature regulation
• A faulty unit can cause symptoms like warm or inconsistent fresh-food temperatures, reduced cooling performance, or unusual clicking/noise at the damper area

• Disconnect power before starting; work on powered appliances can cause shock or injury
• Access typically requires removing interior panels or shelving to reach the damper housing
• Align the motor drive and damper linkage; don't force gears or clips when installing
• After installation, restore power and verify damper movement and temperature control operation