Refrigerator Motor

The Motor Evap Fan is an OEM component specifically designed for Whirlpool refrigerators. This motor works in conjunction with the evaporator coil and fan blade to continually circulate air within the refrigerator. 

The motor evaporator fan is responsible for maintaining proper airflow and temperature control inside the refrigerator compartment. It draws cool air across the evaporator coil to be redistributed throughout the refrigerator, keeping foods fresh for longer.

Over time, motor evaporator fan components can wear down or malfunction due to continuous use. Symptoms of a bad motor evaporator fan include:

• Inconsistent or elevated interior temperatures 
• Loud or unusual noises emanating from the fan/coil area
• Noticeable decreases in cooling/airflow

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

If your refrigerator isn't cooling evenly or the freezer is noisy, the evaporator fan motor may have failed. This motor circulates cold air throughout.

This assembly includes the evaporator fan motor along with its protective cover, located in the fresh food or freezer compartment of the refrigerator. The fan circulates cold air from the evaporator coils throughout the compartment to maintain even temperatures. Replace this assembly if the refrigerator is not cooling properly, you hear unusual humming or buzzing from behind the interior panel, or the fan is no longer running.

This evaporator fan motor drives the freezer fan that circulates cold air across the evaporator coils and through the ducts. Replacing a weak or noisy motor restores proper airflow for consistent cooling and defrost performance.

• Circulates cold air from the evaporator through the freezer and fresh food compartments
• Helps maintain even temperatures and quicker recovery after door openings
• Common failure symptoms: warm refrigerator section, little/no airflow from vents, loud humming/squealing or intermittent fan operation, and frost/ice buildup on the freezer's rear panel
• Also known as the freezer fan motor or "Motor-Evap"

• Disconnect power; remove shelves/drawers and the rear interior freezer panel to access the fan
• Note wiring and mounting orientation; unplug connectors and remove the old motor
• Transfer the fan blade and any rubber isolators/mounting hardware from the original motor if needed
• Ensure blade orientation and wire routing clear the blades; test operation before reassembly

Fixes ice maker not working or refrigerator running warm. This ice box fan motor circulates cold air to the ice maker compartment in your refrigerator.

Freezer not cooling or frost buildup? This evaporator fan motor circulates cold air through the freezer to maintain even temperatures and control frost.

Fixes ice dispenser not dispensing or auger not turning. This motor assembly drives the auger shaft that moves ice from bin to chute. Moderate difficulty.

This condenser fan motor assembly is located near the compressor at the bottom or rear of the refrigerator and circulates air over the condenser coils to dissipate heat. It helps the refrigerator maintain proper cooling temperatures efficiently. Replace this motor if the refrigerator is running warm, the compressor is overheating, or you no longer hear the fan running when the compressor is on.

Refrigerator not cooling properly? A failed fan motor stops air circulation between compartments. This motor restores airflow for even cooling.

Loud noise from freezer or warm temps? Failed evaporator fan motor stops airflow over coils. DIY fix with basic tools restores proper circulation.

Refrigerator warm but freezer cold? This evaporator fan motor restores air circulation between compartments. Common 30-minute DIY fix for temperature issues.

This motor support damper sits between the refrigerator's compressor and base to absorb vibration and movement. Replacing a worn damper helps quiet rattles and humming from the back of the cabinet and keeps the compressor properly supported.

• Cushions the compressor to reduce transmitted vibration and noise
• Helps quiet humming, buzzing, or rattling from the lower rear of the refrigerator
• Maintains proper compressor alignment and support on the base pan
• Common signs of wear: increased vibration/noise, a cracked or flattened damper, or noticeable compressor movement when running

• Unplug the refrigerator and pull it forward to access the rear; allow the compressor to cool before working
• Support the compressor to remove load from the mount before loosening hardware
• Replace the damper and tighten mounting hardware evenly without over-compressing the rubber
• Avoid bending or stressing refrigerant tubing; wear gloves and eye protection

Ice not dispensing from your refrigerator? This auger motor assembly drives the mechanism that moves ice from the bin to the dispenser chute. DIY repair.

Ice won't dispense when paddle is pressed? This dispenser motor assembly drives the auger mechanism. Most DIYers complete installation in 15 minutes.

Fridge not cooling evenly or freezer too warm? A failed evaporator fan motor stops cold air circulation. This motor assembly restores airflow fast.

This motor drives the evaporator fan that circulates cold air from the evaporator coils throughout the freezer and refrigerator compartments. It is typically mounted near the evaporator coils inside the freezer section. Replace this motor if you hear loud buzzing or grinding noises from the freezer, or if the refrigerator is not cooling properly despite the compressor running.