Refrigerator Valve

The Water Inlet Valve is an OEM replacement part for Whirlpool French-door refrigerators. It regulates incoming water supply for critical appliance features such as the ice maker and water dispenser.

Symptoms of a failing inlet valve may include:

• Low water pressure at the dispenser tap  
• Irregular or inadequate ice production
• Fault codes relating to fill or flow errors
• Leaks or drips from valve connections

Causes relate to regular wear expected over many seasons of use. Mineral accumulation inside narrow valve ports is also common given years of exposing components to residential water treatment. 

This authentic Whirlpool replacement is compatible with some Maytag, Jenn-Air and Amana side-by-side refrigerator models as well.

The Water Inlet Valve is an OEM part for Whirlpool refrigerators. It controls the flow of water into the refrigerator's ice maker and water dispenser features. The water inlet valve allows water to enter at precise times and in regulated amounts to fill the water tank for the dispenser and provide water to the ice maker. 

Symptoms of a bad water inlet valve include:

• Inability to dispense water from the refrigerator's dispenser 
• Ice maker not receiving sufficient water to produce ice
• Leaks or water drips from the valve area
• Improper water tank fill levels

Causes can include worn internal components, mineral buildup affecting valve operation, or damage to electronic features controlling water flow.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.

The Water Inlet Valve Assembly is an OEM part for LG refrigerators. This part controls the flow of water into the refrigerator's ice maker and water dispenser. By opening and closing at specific times, it ensures the proper amount of water is supplied for making ice or dispensing water. 

Causes of a bad water inlet valve include clogs from sediment, failure of the solenoids, or cracks in the valve body.

Symptoms of a bad Water Inlet Valve Assembly include:

• No water being dispensed
• Slow or irregular water flow from the dispenser
• Leaks occurring at the back of the refrigerator where the valve is located
• The ice maker not producing ice or producing very small ice cubes

This OEM LG part is also compatible with some Kenmore models.

The Valve Dual Water is an OEM part for GE refrigerators, specifically designed to control the flow of water to both the icemaker and the water dispenser. This dual-function valve ensures that water is properly directed to the icemaker for ice production and to the dispenser for fresh drinking water, maintaining an optimal flow and pressure that is crucial for the refrigerator's operation. 

Over time, the dual water valve can fail due to mineral deposits from hard water, wear and tear from regular use, or electrical issues. A malfunctioning valve can disrupt the water supply to the ice maker and water dispenser, affecting their performance.

Symptoms of a bad Valve Dual Water include:

• No water dispensing at the dispenser
• Irregular or no ice production
• Leaks or drips from the water inlet area
• Unusual noises coming from the valve when it’s supposed to be operating

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This water inlet valve controls water flow to the refrigerator's dispenser and ice maker, restoring proper filling and dispensing when functioning. Designed for direct replacement to stop leaks or restore water delivery. What it does

• Opens and closes water supply lines to the dispenser and ice maker using two solenoids
• Replaces a failed valve that causes no water or reduced water to the dispenser or ice maker
• Stops intermittent leaks or continuous flow caused by a stuck or damaged valve
• Works with the refrigerator's water pressure and electronic controls to meter fills

• One water inlet valve assembly

• Turn off water supply and unplug the appliance before servicing
• Inspect inlet screen/filters and supply line for debris when replacing valve

This water valve assembly controls cold-water flow to a refrigerator's dispenser and ice maker, restoring proper water supply for filling and ice production. It replaces a failing inlet valve to stop no-water or intermittent-fill issues. What it does:

• Directs household water into the refrigerator dispenser and ice maker when solenoids are energized
• Commonly used to fix no-water from dispenser or ice maker and slow or inconsistent filling
• Stops leaks caused by stuck or damaged valve components when replaced
• Works with standard 1/4" water line fittings used on many refrigerators

• One water valve assembly

• Turn off the refrigerator and shut off the household water supply before beginning
• Relieve line pressure and disconnect the water line; beware of residual water in lines
• Inspect supply tubing and fittings; replace damaged tubing or seals as needed
• After installation, restore water, check all connections for leaks, and run a test dispense/cycle

This water inlet valve controls water flow into the washer, restoring proper filling and cycle performance. It replaces a worn or leaking inlet valve to help stop no-fill, slow-fill, or continuous-fill issues. What it does

• Directs hot and cold water into the wash tub when the machine calls for water
• Opens and closes solenoids to regulate fill volume and timing
• Stops water flow when the cycle or pressure switch signals to close
• Can stop or reduce leaks caused by a failed valve assembly

• Disconnect power and shut off the home's water supply before starting
• Inspect and, if needed, replace inlet hoses and gaskets when installing
• Tighten hose fittings by hand then snug with a wrench; avoid overtightening
• After installation, restore water and power and check carefully for leaks