Thermador Parts

Replacement housing cover for microwaves and ovens. Closes and protects internal openings. Restores secure fit when original is cracked, missing, or warped.

Tall item spray head that attaches to the upper feed tube in your dishwasher. Replace if cracked, broken, missing, or won't lock into place properly.

This is a door seal sleeve that fits around the perimeter of the oven door to create a tight seal between the door and the oven cavity. It helps retain heat inside the oven and prevents hot air from escaping during cooking or self-cleaning cycles. Replace this seal if you notice heat escaping around the oven door, uneven cooking temperatures, or visible damage such as cracking, hardening, or gaps in the seal material.

The Mount, Vibration Rubber Range Hood is an OEM part for Bosch range hoods. It plays a crucial role in mounting the range hood itself and reducing noise and vibrations produced during operation. The rubber vibration mount is designed to absorb shocks and isolate noises, providing a smooth, quiet ventilation experience.  

Symptoms of a bad mount can include looseness or detachment of the range hood, increased vibration transfer to surrounding cabinetry, or failure of the rubber material itself.

Symptoms of a bad mount include:

• Noisy operation from the range hood that transfers to cabinets
• Visible vibration of the range hood body during ventilation  
• Eventual detachment or loosening of the range hood mount
• Reduced vibration damping translating to a rougher ventilation cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore range hood models.
 

This electronic PC board is the appliance's main control, processing inputs and directing power to components so cycles run correctly. Replacing a failed board can restore normal operation when the unit is dead, won't start, or stops mid-cycle.

• Interprets user inputs and sensor feedback to execute programmed cycles
• Switches relays to power motors, valves, heaters, and other loads as required
• Manages timing, temperature, and safety logic for consistent performance
• Typical failure symptoms: no power/won't start, unresponsive or erratic controls, cycles ending prematurely, recurring error codes

• Disconnect power before servicing; verify power is off with a meter
• Use ESD protection; handle the board by the edges to avoid static damage
• Move connectors one at a time to identical positions on the new board to prevent miswiring
• Some models require service-mode setup or calibration after installation—follow your model's service documentation

Front leveling leg adjusts and supports your dishwasher at the front. Replace if damaged, missing, or worn to restore proper height and stability.

Restore reliable baking performance with this bake heating element. Mounted at the bottom of the oven, it provides the primary heat source in Bake mode so the cavity reaches and maintains the set temperature for consistent results. What it does:

• Heats the oven in Bake mode to reach and hold the set temperature
• Failure can cause no heat in bake, very slow preheating, or uneven/undercooked results
• Visible cracks, blisters, or a broken coil indicate the element should be replaced
• A shorted element may trip a household breaker or blow a fuse

• One bake heating element

• Disconnect power at the breaker and allow the oven to cool before servicing
• Remove oven racks; take out the element's mounting screws and gently pull the element forward to access wire terminals
• Transfer wires one at a time to the new element; do not allow wires to fall back into the insulation
• Reinstall the element and panels, restore power, and test bake operation

Metal mesh grease filter for range hood. Captures airborne grease and cooking particles to protect the ventilation system. Washable and reusable.

Connects the sump to the pressure chamber in your dishwasher. Replace if cracked, leaking, age-embrittled, or damaged. Includes 2 o-rings for secure fit.

Main broil heating element for the oven, designed to restore top-heat for broiling and browning. Replaces a failed broil element so the oven can produce even, high-intensity heat during broil cycles. What it does:

• Generates the high, direct heat at the top of the oven used for broiling and browning.
• Restores proper broil performance when the element no longer heats or glows.
• Fixes symptoms such as no broil heat, uneven browning, visible burn marks, or a broken/warped element.
• Works as the primary upper heating element used in broil cycles (main oven).

• Disconnect power to the range/oven at the breaker before starting any work.
• Remove oven racks and access the element from inside the oven; element typically secures with mounting screws and terminal connectors.
• Handle terminals and sharp metal edges carefully; wear gloves and eye protection.

This Control Unit is an OEM part for Bosch vent hoods. Serving as the central control hub, this unit governs the various functions and settings of the vent hood. 

A common issue with a malfunctioning Control Unit involves electrical malfunctions or component failure.  

Symptoms of a defective Control Unit may include:

• Inoperative fan or lighting functions
• Unresponsive control buttons or settings
• Erratic behavior or intermittent functioning of the vent hood

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Captures cooking grease and particles to protect your range hood blower. Replace when clogged to restore airflow and ventilation. Confirm fit by model number.

Gas supply tube connects gas line to range burners. Replace if cracked, kinked, damaged, or leaking. Installs between supply valve and burner assembly.

Fix a microwave door that won't pop open when you press the button. This door release lever restores smooth latching action for easy everyday use.

6-inch trim ring frames the surface element opening on your cooktop. Replace a discolored, warped, or missing ring to restore a clean, finished look.

This LP main jet regulates propane flow to a surface burner to maintain a clean, stable flame. Replace a clogged or incorrect jet to restore proper burner performance, especially when converting a cooktop or range from natural gas to LP.

• Meters LP gas to the burner head for correct flame size and combustion
• Direct replacement for a damaged, clogged, or incorrect jet during service or LP conversion
• May help with yellow/sooty flames, weak or overly high flames, uneven heating, or delayed ignition

• Shut off gas and power; allow the appliance to cool completely
• Remove grates, caps, and burner head to access the orifice holder
• Start the jet by hand, then tighten gently with the correct tool—do not overtighten
• After installation or any LP conversion, leak-test connections and verify a steady blue flame; other jets and the regulator may also require LP settings per the model's instructions