Whirlpool Range Igniter

Replaced igniter under oven floor panel. Read more

First I watched the repair video, and then was successful in changing out two of the Ignitor's on the surface Burners, it worked great ! Read more

I replaced the Gas Range Broil Burner Spark Electrode Read more

• Won't start

Of course, before disassembling anything, I unplugged and turned off the gas supply. To replace the spark electrode, I removed the drip pan/surface to gain access to the burner assemblies. Next, I unscrewed (with a 1/2" open-end wrench, I think) and disconnected the gas supply tubing from the burner assembly with the cracked electrode, and then unscrewed the assembly itself from the base surface. With the assembly detached, I flipped it over and removed the screw that secured the cracked... Read more

• Won't start

I removed the burners and replaced the igniters. The burners must be removed because the igniters go underneath them. This job turned out to be very difficult because my stove is 16 years old and the screws holding down the igniters were completely rusted and bound to the stove top, so I had to drill out all of the screws. Also, the burners were bound to the gas flues by mineral deposits and separating them was very difficult. Once I got the stove top up, I threaded the igniter wires to the... Read more

Had a repair person come into my home and he suggested a different ($200) part, labor would have been another $125. Seeing that it would cost almost $400 fix it, we were just going to buy a new oven. The next day, I called Appliancepartpros and spoke to someone from their support. I explained the symptoms and they suggested this $50 part and told me that I could return it, even if it didn't work. Figured I had nothing to lose. Based on the diagram they sent, I was able to fix the oven (I'm... Read more

Took apart the top of the stove and replaced ignitor Read more

I found the model number on the stove and ordered a replacement. It arrived in two days. I replaced the old one and it works great. Read more

• Won't start
• Gas igniter glows, but will not light
• Little to no heat when baking

Replaced the oven igniter, following the general instructions on the ApplicancePartsPro.com website. It took me a little while to figure out how to get to the wiring for the igniter, as I had no access panel on the back to get to the wires. In my particular Whirlpool oven (very old model) it turned out that you have to remove the pots/pans drawer under the oven to get to the exposed wiring at the back. Once I figured this out, the rest of the replacement was a snap. Read more

Internet suggested if yellow light happened time to replace. Bought two since I was having trouble with both for years. Would have been nice for a video to exist. The removal was nothing like what is out there and extended the time of the job. Read more

I replaced all 4 ignitors and new clips. Read more

I disassembled the top of the range and looked at the problem burner. It looked like there was a spark at all three other burners but not the problem burner. There was a visible spark at the connector between the wiring harness and the ceramic igniter but that spark wasn't making it up to the top of the igniter where it can light the burner. I ordered a new igniter for $19 and it was on my doorstep the next day. I replaced the part and now my wife thinks I am a genius. Don't tell her that... Read more