Whirlpool Spring Parts

This door spring counterbalances the door so it opens smoothly and doesn't drop. Replacing a fatigued or broken spring restores proper door feel and helps protect hinges and related components from excess strain.

• Provides the tension that balances the door during opening and closing
• Helps prevent the door from slamming or falling open too quickly
• Replaces a stretched, weakened, or broken spring
• Common signs: door feels heavy, drops quickly, or sits unevenly side-to-side

• Disconnect power before servicing; for dishwashers, also shut off the water supply
• Support the door and carefully relieve spring tension before removal
• Install the new spring in the same attachment points/orientation as the original
• Replace both together to maintain even tension

Suspension rod ball and bushing kit includes 4 balls and 4 bushings.

Replacement spring kit that restores proper tension and balance to appliance doors and lids, helping them open and close smoothly and stay in position. Use this kit to replace worn or broken springs that cause sagging or noisy operation. What it does:

• Replaces worn or broken door/lid springs to restore proper tension and balance.
• Helps the door or lid open and close smoothly and remain in the desired position.
• Reduces sagging, bouncing, slamming, and related noise caused by failed springs.
• Prevents additional wear on hinges and closures by restoring correct alignment and support.

• Disconnect power (and water, if applicable) before starting any repair; follow all safety instructions in the appliance manual.
• Support the door or lid during removal and installation to avoid pinch or crush injuries.
• Use proper hand protection and tools; keep small fasteners organized to avoid loss.

This replacement spring restores the correct tension in the mechanism it supports so parts move smoothly and return to position as designed. Replacing a fatigued or broken spring helps eliminate slack and prevents accelerated wear on connected components. What it does:

• Provides the return/tension force for the linked assembly
• Helps components travel smoothly and hold their intended position
• A stretched or broken spring can cause sluggish movement, sagging, or failure to return
• Contribute to squeaking, rattling, or snap-back noises during operation

• 1 spring

• Disconnect power and shut off water or gas supplies before servicing
• Note original routing and anchor points; take a reference photo before removal
• Use pliers to control the spring during removal/installation; avoid overstretching
• Inspect anchors, cables, and pivots for wear and replace any damaged parts

This door spring counterbalances your dishwasher door so it opens and closes smoothly without slamming. Replacing a fatigued or broken spring restores proper tension and helps protect the hinges and latch.

• Provides counterbalance tension to the door through the hinge mechanism
• Helps the door open and close with controlled movement and stay in position
• Symptoms of failure can include a door that drops quickly, feels heavy, or won't stay put
• May also cause popping/squeaking noises or uneven action on one side of the door

• Disconnect electrical power and turn off the water supply before servicing
• Remove the toe panel/kick plate to access springs near the hinges
• Carefully relieve and reattach spring tension; wear gloves and eye protection
• Ensure both sides are tensioned evenly after replacement

This replacement spring restores the correct tension and return action for its connected mechanism so your appliance operates smoothly. Install it to replace a broken or fatigued spring and resolve weak, inconsistent, or non-returning movement. What it does:

• Provides tension so linked parts move and return to their proper position
• Helps keep mechanisms aligned and operating smoothly
• Replaces stretched, broken, or missing springs that cause poor operation
• Common symptoms: part won't return or stay in place, weak/sluggish action, rattling or rubbing noises

• 1 spring

• Disconnect power before servicing; shut off water or gas if applicable
• Note the original spring routing and orientation; take a quick photo before removal
• Control spring tension during removal/installation to avoid snapback; wear cut-resistant gloves and eye protection
• Use suitable pliers/spring tool and inspect adjacent brackets or links for wear while reassembling

Restore smooth, secure door operation with this Door Spring. It provides the hinge tension that counterbalances the door so it opens smoothly and stays properly closed, replacing a broken or fatigued spring to bring back the correct feel.

• Counterbalances the door's weight within the hinge mechanism
• Helps the door close fully and remain closed
• Promotes smooth, controlled opening without dropping or slamming
• Common symptoms: door feels heavy or uneven, drops open, won't stay closed, or a spring appears broken/stretched

• Disconnect power at the breaker and allow the appliance to cool completely before servicing
• Support or remove the door to access the hinge and spring
• Springs are under tension; use caution and eye protection when releasing/installing
• If your model uses two springs, replace both to maintain even tension

This replacement container spring helps restore proper tension and support for the container assembly, so the container stays secure and operates smoothly. Ideal when the original spring is worn, stretched, or broken. What it does:

• Provides tension to hold the container or bin in its intended position
• Replaces worn or broken springs that cause slipping or poor engagement
• Stops rattling or shifting caused by a weakened spring
• Helps the container latch, release, or return smoothly during use

• Basic hand tools may be required; follow the appliance's service manual for access and removal
• Disconnect power (and water if applicable) before servicing to prevent injury
• Handle small parts carefully to avoid pinching; springs can store tension

This genuine OEM return spring restores proper return/tension for the appliance component it connects to, helping controls, latches or hinges snap back into place. Replacing a worn spring can stop sticking, sagging or failed return action. What it does:

• Provides tension to return a lever, latch or door component to its resting position
• Restores crisp return action when a control or hinge feels loose or fails to snap back
• Helps reduce rattling or intermittent contact caused by a weak or broken spring
• Functions quietly once replaced, improving normal operation of the affected mechanism

• Disconnect power and gas before servicing; follow appliance-specific safety instructions
• Springs can be under tension — use proper tools and caution to avoid injury or part damage
• Compare the old spring to the new one for correct length and end type before installation

This suspension stabilizes the washer tub to reduce excessive movement and vibration during spin cycles, helping the washer run quieter and more smoothly. What it does

• Supports and centers the washer tub to prevent excessive rocking during operation
• Dampens vibration and reduces noise caused by an imbalanced load
• Helps maintain proper drum alignment for reliable spinning and draining
• Worn or damaged suspension can cause loud noise, heavy vibration, or excessive movement

• One suspension (single tub support) as shown

• Disconnect power and water supply before beginning any repair
• Support the tub/drum before removing the old suspension to prevent sudden movement
• Inspect other suspension components and mounting hardware; replace any worn parts for balanced performance

This spring kit replaces worn or broken return springs in the applicable assembly, restoring proper tension and smooth movement so the mechanism operates reliably throughout the cycle and returns to its proper position. What it does:

• Provides the correct tension to move or hold parts in place
• Helps resolve weak return action, sticking, failure to engage/latch, or sagging components
• Can reduce noise caused by loose or fatigued springs
• Maintains consistent operation throughout the appliance's cycle

• Manufacturer-supplied spring kit

• Disconnect power; turn off water supply if applicable
• Springs are under tension—use eye protection and release carefully
• Note original spring routing and attachment points before removal
• Replace both for balanced operation

This genuine OEM spring provides the tension needed for the appliance door to open and close smoothly and stay properly seated. It restores reliable door operation and reduces sagging or unlatched door issues. What it does:

• Applies tension to the door hinge/assembly so the door stays closed and aligns properly.
• Helps the door open and close smoothly without slamming or dragging.
• Reduces wandering, sagging, or a door that won't latch securely.
• Can eliminate popping or squeaking noises tied to a worn or stretched spring.

• One replacement door-tension spring.

• Disconnect power (and water if applicable) before starting any repair.
• Springs are under tension — use caution and appropriate tools/gloves to avoid injury.
• Inspect hinge/retainer hardware and replace any damaged clips or anchors during installation.

This spring element support secures and stabilizes a range or oven heating element to keep it properly positioned for consistent heating and safe operation. It replaces a worn or broken support that allows an element to sag or vibrate. What it does:

• Holds the bake/broil heating element in the correct position so it heats evenly
• Prevents the element from sagging, touching the oven cavity, or rattling during use
• Helps maintain correct element clearance to reduce arcing and uneven cooking
• Addresses symptoms like a loose or wobbly element, unusual noises, or intermittent heating

• One spring element support

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Handle the heating element and support carefully to avoid bending or damaging the element
• Verify correct part orientation against the oven's wiring diagram during installation

This replacement door tension spring restores proper door balance and closure on compatible Whirlpool appliances, helping the door stay aligned and close securely. It's a direct-fit repair part when the existing spring is worn or broken. What it does:

• Provides counterbalance tension so the appliance door opens and closes smoothly
• Prevents the door from sagging, sticking, or not staying fully closed
• Reduces excess strain on hinges and latch mechanisms caused by a weak spring
• Helps eliminate rattling or uneven door movement that can occur when springs fail

• One replacement door tension spring

• Disconnect power and empty the appliance door area before starting any repair
• Use caution: springs are under tension—wear safety glasses and gloves
• Typical install requires basic hand tools; follow OEM diagram for correct routing and attachment

This replacement tension spring restores proper tension and movement for the linked assembly, helping components return to position and operate smoothly. Designed to match the original spring's shape and function for reliable performance. What it does:

• Provides return tension for moving parts so doors, levers, or linkages operate correctly
• Helps maintain correct alignment and prevents sagging or binding
• Replaces worn or stretched springs that cause sluggish or uneven operation
• Common symptom: assembly won't return to its resting position or feels loose

• One tension spring

• Disconnect power (and water if applicable) before beginning any repair
• Use care handling springs under tension; wear eye protection
• Remove any retaining clips or brackets in the order shown in the service diagram