Cooktop Tube Or Fitting

This 1/4-inch gas supply tube routes fuel between internal gas components to deliver a stable, leak-resistant supply to the burner. Replacing a damaged tube helps restore safe operation and consistent burner performance.

• Carries gas between internal components (such as the valve/manifold and burner)
• Maintains a sealed pathway to prevent leaks
• Helps ensure proper ignition and flame size
• Common signs of failure: visible kinks, cracks, or corrosion; weak/no flame; gas odor near the tube

• Shut off gas supply and power before servicing; work in a well-ventilated area
• Match original routing and orientations; avoid kinks and sharp bends
• Tighten fittings to manufacturer guidance; do not overtighten
• Leak-test all joints with approved leak-detection solution and verify burner operation

Gas supply tube connects gas line to range burners. Replace if cracked, kinked, damaged, or leaking. Installs between supply valve and burner assembly.

Burner igniter assembly generates the spark that lights gas cooktop burners. Replace if your igniter is cracked, broken, or no longer sparking properly.

This tube routes water from the refrigerator's water valve to the dispenser or ice system, restoring proper water flow and stopping leaks when a cracked or clogged supply tube is the issue. Easy direct replacement for affected lines. What it does

• Carries water from the valve to the dispenser or ice maker so the appliance can fill and dispense properly.
• Commonly replaced when you see leaks at fittings, a puddle under the fridge, or a visibly cracked or split tube.
• Can restore normal water flow when the line is pinched, kinked, or partially obstructed.
• Works with factory fittings and clamps used on the valve-to-ice maker/dispenser connection.

• Turn off the refrigerator's water supply and unplug the appliance before starting; drain remaining water from the line.
• Inspect fittings for damage; loosen or remove existing clamps/fittings to swap the tube, then secure new tube and clamps to prevent leaks.
• After installation, restore water and power, check all connections for leaks, and run the dispenser/ice maker briefly to confirm proper flow.

Gas supply tube for gas cooktops. Connects the gas valve to burners. Replace if tube is cracked, corroded, leaking, or damaged during maintenance.

Elbow fitting for cooktop gas supply lines. Replaces cracked, damaged, or missing elbow connectors that attach gas tubing at angled joints.

Burner tube for gas cooktops. Delivers gas from the manifold to the burner head. Replace if cracked, corroded, or damaged to restore safe gas flow.

Gas supply tube for gas cooktops. Connects the gas source to the burner manifold. Replace if tube is cracked, damaged, or leaking at connections.

Gas supply tube for gas cooktops. Connects the gas line to the burner manifold. Replace if cracked, kinked, or showing wear to ensure safe operation.

Simmer burner tube for gas cooktops. Installs in the simmer burner assembly to deliver gas flow. Replace if tube is cracked, corroded, or damaged.

This gas tubing replacement routes fuel between the appliance gas manifold and control valve to restore safe, reliable fuel delivery. Use it when tubing is damaged, corroded, or leaking to help eliminate gas leaks and restore normal burner operation. What it does:

• Channels natural gas or LP from the manifold to the valve and burners for ignition
• Replaces cracked, corroded, or kinked tubing that can cause leaks
• Addresses symptoms like a gas smell near the appliance, burners that won't light, or intermittent flame
• Keeps fuel flow consistent so burners heat predictably when controls are on

• Shut off the appliance gas supply and disconnect power before starting work
• Tighten fittings to manufacturer torque; check all connections for leaks with a soap solution or approved gas leak detector
• If you smell gas during or after installation, stop and ventilate the area.

Gas tubing for ranges and cooktops. Connects gas supply to burners. Replace if cracked, kinked, worn, or damaged to restore safe gas flow.

Gas tubing component for cooktop burner assemblies. Replaces cracked, damaged, or worn gas supply tubes. Essential structural part for safe gas flow.

1/4" gas supply tubing connects your range's gas line to the valve. Replace when damaged, cracked, leaking, or during valve service for safe operation.