Craftsman Parts

This air filter is the replacement part for specific tillers, edgers, and cultivators. Its main function is to prevent grime and debris from reaching the engine and carburetor. With time and use, air filters get dirty and may become clogged or damaged. Replacing the air filter regularly encourages adequate air flow to the engine, which reduces engine wear, and increases the longevity of the machine. Replacement is simple and can be done in a matter of minutes. With a screwdriver, remove the old air filter, and install this new, clean filter. Be sure to check the owners manual for proper installation techniques, as it varies by brand and machine. This air filter, made of foam, is a genuine OEM part. It is sold as an individual unit. It is compatible with tillers, edgers and cultivators made by the Ryobi, Troy-Bilt, and Yardman brands. All engines need regular care and maintenance to perform optimally. To ensure the Tiller, Edger, or Cultivator model starts easily, maintains power, functions properly, and has a long, hard-working life, the air filter should be replaced routinely.

This is a genuine air filter replacement designed for use in select lawn and garden equipment engines. The air filter is responsible for catching debris and dirt that may be in the air as it comes into the engine. This prevents the engine from being damaged by debris or buildup. Over time, the air filter will become clogged and should be replaced as a part of routine maintenance. It is helpful to keep an extra air filter on hand in case of an emergency replacement need. This genuine OEM air filter is manufactured by Husqvarna and meets exact standards for compatible models. It can be used in select models of chainsaws from the brand, as well as some from Jonsered. This air filter is sold as an individual unit and does not include any additional parts or accessories. A screwdriver will be required for replacement. To replace the filter, allow the engine to cool. Then, remove the screws from the cover of the filter and take out the old filter. Put the new filter in place and replace the cover. Then, reattach the screws and the job is done. Be sure to wear gloves when performing engine repairs.

This authentic OEM part is a replacement foam air filter for a gas-powered leaf blower. For a gas-powered engine to work, it must maintain a balance of fuel and oxygen. This means it is constantly taking in air from outside the engine. However, working in dusty areas can cause a lot of debris to mix with the air. A foam air filter helps to catch that debris before it can clog up an engine. After an extended period of use, though, the filter will become clogged. Replacing a foam air filter is an easy repair that will only require a screwdriver. Remove the air filter cover, take out the old filter, and put in the new filter. This part works with gas-powered leaf blowers from Poulan, Weed Eater, and Husqvarna and is sourced directly from the original manufacturer. It ships individually.

This air filter replacement is designed for use with MTD line trimmers. It filters the air that comes into the engine to remove debris, particles, and various fuel and oil residues to ensure only the cleanest air gets through to the carburetor. Because of its job, the air filter will naturally become clogged over time with regular use, but many people also keep an additional filter on hand for emergency or intermittent replacements. The air filter should be replaced annually as a part of routine maintenance, or whenever it becomes clogged. This genuine OEM filter is manufactured to exact specifications by MTD and is compatible with Troy-Bilt and Cub Cadet trimmers. Be sure the engine is cool before beginning any repairs and wear gloves for hand protection. No tools are required for this part replacement, which can be done in just a few minutes. This filter is sold individually and those who need more than one will have to order multiple quantities.

This genuine Husqvarna filter holder can be used as a replacement part for string trimmers. The function of a filter holder, otherwise known as an air box, is to take in external air flow and channel it through a network of valves into the cylinder of the engine, which is where the fuel combusts and ignites the spark plugs.A filter holder might have to be replaced if it shows symptoms of disrepair or malfunction that prevent it from transferring air flow into the cylinder. These symptoms of damage could include an engine that won't start or misfires frequently, reduced fuel economy, or block smoke pouring out of the exhaust. Though these symptoms are not necessarily directly attributable to the filter holder, if a visual inspection shows that a damaged filter holder is indeed responsible, it should be replaced immediately. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This filter holder is compatible with the following brands: Husqvarna, Poulan, and Weed Eater.

This air filter is a part of the air cleaning system on select lawn and garden engines. Combustion engines take in air and that is mixed with the fuel in the carburetor and then sent to the engine. The air filter is designed to catch particles and debris that come into the engine so that the air getting through is clean and pure. The filters naturally become clogged with regular use so replacing them is a part of routine maintenance that should be done every six to 12 months, depending on frequency of use. In some cases, the filter may become clogged in between maintenance, which would require an additional replacement. It may be helpful to keep an extra filter on hand. This OEM air filter is manufactured by Poulan to exact standards. It fits a variety of Poulan machines, as well as those from Weed Eater, AYP, and Husqvarna. It is used in various models of pruners and trimmers and does not require any tools for replacement. The air filter is made of durable foam material and designed to catch fine particles to ensure the cleanest air enters the engine. It is sold individually.

The air filter works to prevent contaminants from entering the chainsaw’s carburetor. When the air filter becomes clogged with things like dust, yard clippings, pollen, and other materials, it cannot supply fresh air to the carburetor. If the carburetor does not have enough air to mix with the gasoline, it cannot create a fuel mixture for the engine. If you see signs that the engine is not running correctly, runs roughly, or does not start at all, check the air filter and replace if needed. It is important to check the air filter frequently to prevent damage or engine inefficiency. Keep several air filters on hand to make swapping them out convenient. A good rule of thumb is to replace air filters annually. This air filter is compatible with chainsaws made by Craftsman, McCulloch, and Poulan. This air filter is a genuine OEM part.

The air filter in a chainsaw is located right between the intake and the carburetor and is responsible for cleaning the air as it enters the carburetor. Over time and with regular use, the air filter may be clogged with debris and buildup. Therefore, they should be replaced regularly as a part of routine maintenance, or whenever equipment isn’t running as it should. It’s also a good idea to have an extra filter on hand. Let the engine cool completely before replacing the air filter to reduce the risk of burns. Ensure that the saw is off and not at risk of engaging, and use gloves to perform the replacement. This air filter is made by Husqvarna and is designed to work with select Craftsman, Poulan, and Poulan Pro chainsaw models. It is a genuine OEM part and is sold as a single filter. Check the manual for compatibility and part numbers to ensure an exact fit.

The air filter on lawn machines protects from dirt and debris. Lawn equipment typically creates a substantial amount of dust and dirt, and the air filter is needed to ensure that dirt does not get into the engine and the carburetor. The air filters are designed to trap dirt, which means that they will eventually need to be replaced. The longer they are used, the more clogged they will become. This can prevent enough air from getting into the carburetor, which could result in issues with the engine misfiring and starting properly. Owners should regularly check the condition of the air filters and replace them when they become too dirty. This is a genuine OEM part sold individually that will replace air filters on trimmers, leaf blowers, and pole pruners. The part is compatible with a range of brands including Craftsman, Weed Eater, Poulan, and Husqvarna.

This replacement air filter is designed as a replacement for select lawn and garden engines. This filter is located near the carburetor and is responsible for filtering the air that comes into the engine. The dense foam catches particles, debris, and residues so that only the purest air gets in the carburetor for optimal performance. Over time, air filters become clogged with regular use, so replacing them is considered a part of routine maintenance. However, they also may need to be replaced intermittently. If the engine is not running properly or there are visual signs of a dirty air filter, this part can offer a replacement for compatible engines. This OEM foam air filter is compatible with select engines from Husqvarna, including those on leaf blowers from Craftsman, Poulan and Poulan Pro, AYP, and Weed Eater. Always allow the engine to cool completely before starting repairs and wear gloves for hand protection at all times. Replacing the air filter is a simple task that doesn’t usually require tools. This replacement part is sold individually and comes as a single unit.

This pleated filter or filter pleat is an OEM replacement part designed specifically for use in chain saws and gas chain saws made by Craftsman, Husqvarna, and Poulan, among others. The filter is designed to capture any debris or dirt from the air before it makes its way into the carburetor and engine. Any debris can cause the engine to malfunction or idle unevenly. This can also prevent proper cooling and allow engine overheating or damage. Replacing the filter is easy and requires a screwdriver and socket set. After the machine cools completely, remove the cover. Next the filter pleat is removed and replaced with this replacement part. Then, replace the cover. This part ships individually without any hardware or other components and is made of long-lasting, effective materials.

This replacement part is an air cleaner assembly. This is a genuine replacement part made by MTD. This air cleaner assembly is able to filter the air coming in and out of the machine to ensure it is free of dust and other debris. This part is able to keep the engine safe and allows it to run smoothly and effectively. A new air cleaner assembly might be needed if the current one is damaged or too dirty to clean. If the current part does not filter air properly, it is recommended that it be replaced as soon as possible. If not up to working standard, this part can cause the engine to become damaged as too much dust or debris is harmful to the engine. Be sure that the engine is completely shut down before replacing this part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part.

This genuine MTD air cleaner assembly can be used as a replacement part for string trimmers. An air cleaner assembly pincludes an air cleaner as well as all of its associated components. The purpose of an air cleaner is to prevent the engine of the string trimmer from accumulating dirt, debris, and other such external materials within its infrastructure.Air cleaners are often subject to replacement within the lifespans of standard string trimmers, and if its fastening components and housings are damaged as well, this air cleaner assembly should be ordered as a complete replacement. Damage to an air cleaner can come in the form of piercings, holes, rips, tears, or corrosion to the material that impedes it from preventing the accumulation of external materials. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This air cleaner assembly is compatible with the following brands: MTD and Craftsman.

This air cleaner housing is a genuine MTD part, sold individually. This air cleaner housing can be used as a replacement part for lawn mowers and leaf blowers. The air cleaner housing provides a casing for the air cleaner so that it can shield the internal engine from dirt, debris, and pebbles. Check the air cleaner housing regularly to ensure that it is intact and no debris is getting into the engine. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This air cleaner housing is compatible with the following brands: MTD, Huskee, and Yard-Man.