Crosley Parts

The Whirlpool Dispenser Assembly is an OEM component specifically designed for Whirlpool dishwashers. It houses the mechanisms that dispense detergent and rinse aid into the wash basin properly during each cycle.

Causes of a bad dispenser assembly can include clogged or jammed dispenser doors and chutes. Hinges or latches may wear down over years of openings and closings between loads.

Symptoms of a bad dispenser assembly include:

• Liquid detergent or rinse aid dripping outside the dispenser area
• Dishes coming out with residue or spots indicating insufficient cleaning
• The dispenser doors not opening fully or staying shut securely

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Admiral, and select Kenmore models.

The Bearing and Seal Kit is an OEM component for Whirlpool and KitchenAid front-load washing machines. The kit includes 2 center post bearings, 3 agitator shaft seals, and 1 center post seal.

These internal seals help retain lubrication inside the motor shaft housing, while the bearings allow for smooth rotation of critical components like the drive pulley. Continuous belt rubbing and water exposure diminish their lifespan over time.

Symptoms of worn motor seals or bearings include:

• Abnormal vibrations during the wash or spin cycles
• Noisy operation and grinding sounds from the motor
• Difficulty starting or stopping the cycle

This OEM kit is also compatible with Maytag, Jenn-Air, Magic Chef, and select Kenmore models.

The Tub to Pump Hose is an OEM replacement part for Whirlpool washing machines. It connects the washer tub assembly to the pump, carrying water drained from the tub into the pump housing. This hose is a component that allows the machine to drain water efficiently during the spin cycle.

Causes of a bad tub to pump hose can include mineral buildup that restricts water flow, fatigue and wearing that cause cracks or splits, damage from rodents or sharp/heavy objects in the wash load, and deterioration from age that increases brittleness.

Symptoms of a bad hose include:

• Water leaks during or after the drain cycle
• Inability to fully drain water from the tub
• Water remaining in the tub after spinning

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Compartment Door is an OEM component for Whirlpool and Kenmore built-in refrigerator models. It provides access to organized storage in the fridge's fresh food compartment. The compartment door measures approximately 15” long by 6” wide.

As a high-use access point, the door endures constant opening/closing stresses. Over extended periods, normal wear gradually reduces the quality and integrity of its cushioned sealed closure.

Symptoms include:

• Difficulty fully closing/latching the compartment door 
• Loud squeaking or sticking during operation

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Door Bin is an OEM part for Frigidaire refrigerators. It is a storage compartment located on the inside of the refrigerator door, providing a convenient space to store items such as condiments, beverages, and jars. This bin measures about 10 inches wide by 4 inches high by 6 inches deep.

A bad door bin can occur due to accidental damage, wear and tear over time, or improper handling. If the bin cracks, breaks, or becomes warped, it can compromise its function and affect the storage capacity of your refrigerator.

Symptoms of a bad door bin include:

• Cracked or broken bin.
• Difficulty in keeping items in place.
• Limited storage capacity.
• Inability to attach the bin to the door.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Crisper Pan is an OEM part for Frigidaire refrigerators. It provides enclosed storage for fruits and vegetables, helping maintain freshness.

Over time, the crisper pan can crack or warp due to exposure to cold, moisture, and repeated opening/closing. Damage from improper handling when loading produce can also cause failure.

Symptoms of a failing crisper pan include:

• Poor humidity regulation/airflow
• Condensation buildup inside the pan
• Visible cracks or splits in the plastic
• Difficulty sliding the crisper in and out
• Produce spoiling more quickly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. Note: Due to a factory revision, the new crisper pan may not have the graphics across the front but is a genuine factory replacement part.  

The Lower Crisper Pan is an OEM part for Frigidaire refrigerators. It is designed to store fruits and vegetables at an optimal humidity level, keeping them fresh for a longer period. This pan fits into the lower section of the refrigerator and provides a dedicated space for produce, helping to organize and maximize the storage capacity of your fridge. The pan measures approximately 16.5" x 16.2" x 8". 

You should replace the lower crisper pan if it becomes cracked, broken, or warped. Causes of a bad crisper pan can include regular wear and tear from frequent use, overloading with heavy items, or accidental damage from dropping or mishandling the pan.

Symptoms of a bad lower crisper pan include:

• Cracks or visible damage to the pan
• Difficulty sliding the pan in and out of its compartment
• Reduced ability to maintain proper humidity levels, leading to faster spoilage of produce

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Agitator Base is an OEM part for Whirlpool washing machines. This component is located at the bottom of the agitator assembly and is responsible for supporting the agitator while it moves clothes during the wash cycle. This is the bottom half of the agitator. For a complete agitator search by your model. If your model does not list one you can order 285565

Over time, the agitator base can wear out or become damaged due to constant use, heavy loads, or exposure to harsh detergents. A compromised agitator base can lead to inefficient washing and potential damage to other parts of the washer.

Symptoms of a bad agitator base include:

• The agitator not moving properly or becoming loose
• Unusual noises during the wash cycle
• Clothes not being cleaned effectively
• The washer shaking or vibrating excessively

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Defrost Thermostat is an OEM part for Whirlpool refrigerators. It monitors the temperature of the evaporator coil and signals the defrost heater to turn on when necessary, preventing frost buildup on the coil.

You should replace the defrost thermostat if it becomes faulty or damaged. Causes of a bad defrost thermostat can include electrical issues, exposure to moisture, or general wear and tear over time.

Symptoms of a bad defrost thermostat include:

• Frost buildup on the evaporator coil
• The refrigerator running constantly or not cooling properly
• Water leaks inside the refrigerator
• The defrost heater not activating during the defrost cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Defrost Thermostat Kit is an OEM replacement part for Frigidaire upright freezers. 

Symptoms of a failed defrost thermostat include:

• Excessive ice buildup within evaporator coils over time      
• Thermostat failure causing errors
• Improper or incomplete defrost cycles leaving frost accumulation  

Causes related to prolonged exposure to vibration, temperature fluctuations, and refrigerant gases taking their toll on delicate thermostat circuitry and heating filaments over many years of use. 

This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Condenser Fan Motor Kit is an OEM part for Frigidaire refrigerators. This kit includes the motor and necessary components to replace the existing condenser fan motor in your appliance. It is responsible for circulating air through the condenser coils to dissipate heat outside the refrigerator, helping to maintain the internal temperature and keep the compressor cool.

Causes of damage to the condenser fan motor can include wear and tear over time, dust and debris buildup that obstructs fan movement or damages the motor, and electrical issues such as shorts or surges that can burn out the motor.

Symptoms of a bad Condenser Fan Motor include:

• The refrigerator overheating or not cooling efficiently
• Unusual noises coming from the back of the refrigerator
• The refrigerator cycling on and off more frequently or running longer than normal

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Tub Seal is an OEM part for Whirlpool washing machines. Located between the outer tub and inner basket, it forms a barrier preventing leaks that could damage surrounding components and structures.

Causes of a bad tub seal can be cracks or compression failures due to repetitive impacts and stresses from continual clothes tumbling. Detergents and temperature fluctuations also break down rubber over decades when exposed to laundry environments.

Symptoms of a bad tub seal include: 

• Water leakage noticed around the base of the washer cabinet
• Reduced or inefficient cleaning from leaking wash water 
• Potential water damage risks to floors and home infrastructure

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Idler Arm Sleeve is an OEM replacement part specific to Whirlpool brand clothes dryers. It is a cylindrical component that protects the idler arm and accommodates its movement. Located near the dryer drum, the idler arm sleeve aids in the smooth operation of the drive system that rotates the drum.

Causes of a worn idler arm sleeve include normal abrasion from repeated use and vibration. Failure results in increased friction and noise.

Symptoms of a faulty sleeve are:

• Clunking or grinding noises coming from the rear of the dryer
• Uneven drum rotation or rotation difficulties
• Premature wear of idler arm bearings
• Idler arm movement not sliding freely

This part is also compatible with Whirlpool, Maytag, KitchenAid, and other brands.

The LED Light Bulb is an OEM part for Frigidaire refrigerators. It provides illumination inside the refrigerator, making it easier to see and access food items.

Causes of a bad LED light bulb can include burnout from prolonged use, electrical surges, or damage from physical impact. Additionally, issues with the bulb's connection or internal circuitry can result in malfunction.

Symptoms of a bad LED light bulb include:

• The refrigerator interior remaining dark when the door is opened
• Flickering or dim light
• Intermittent lighting
• Complete failure to light up

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Washer Gear Case is an OEM part for Whirlpool washing machines. It is a critical component that houses the gears responsible for the rotation and agitation of the washer drum. This gear case ensures that the washer performs its washing cycles effectively by providing the necessary mechanical movements.

Causes of a bad gear case can include wear and tear from prolonged use, lubrication breakdown leading to increased friction, or damage from overloading the washer. Additionally, exposure to water leaks can lead to corrosion and deterioration of the internal components.

Symptoms of a bad gear case include:

• Unusual grinding or clunking noises during the wash cycle
• The drum not spinning or agitating properly
• Leaks of oil or grease underneath the washer
• The washer failing to complete its cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Silverware Basket Assembly is an OEM part for Whirlpool dishwashers. It provides an organized space for holding and separating silverware and small utensils during the dishwashing cycle, ensuring they are properly cleaned and dried. This basket measures 8 inches wide, 11-1/2 inches high, and 12 inches deep. 

You should replace the silverware basket assembly if it becomes cracked, warped, or damaged. Causes of a bad silverware basket assembly can include regular wear and tear from repeated use, damage from overloading or mishandling, and exposure to high temperatures.

Symptoms of a bad silverware basket assembly include:

• Broken or missing sections of the basket
• Utensils slipping through holes or falling out
• Difficulty placing or removing silverware
• Inefficient or uneven cleaning of silverware

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.